Тёмный

2014 Town & Country Driver's Window Motor & Regulator 

APDTY
Подписаться 74 тыс.
Просмотров 29 тыс.
50% 1

Find Parts:
Models WIth 6-Pin Window Motor Connector (AUTO Up/Down)
Front Left (Driver-Side) = amzn.to/45NM4yj
Front RIght (Passenger-Side) = amzn.to/3OUopFS
Models With 2-Pin Window Motor Connector (Without AUTO Up/Down)
Front Left (Driver-Side) = amzn.to/3EiS0no
Front Right (Passenger-Side) = amzn.to/3L17bp9

Опубликовано:

 

6 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 38   
@frankknott8542
@frankknott8542 9 месяцев назад
Great video. Thank you. I replaced my passenger side regulator and motor with fewer steps. Once the bolts were removed from the black inner door panel and the latch there was enough wiggle room to remove the window and damaged parts and install the new regulator and motor then reinstall the window. Pushing down hard on the window to make it lock into the regulator was the solution to my only issue. Thanks again.
@MiguelReynoso
@MiguelReynoso Год назад
Thank you so much! This video saved me $650 dollars and I learned a new skill. Excellent tutorial. Getting the glass to pop in to place was the worst part of the process. Lining up the regulator also sucked. I ended up attaching it first and then putting everything in place.
@robertlovell8899
@robertlovell8899 10 месяцев назад
This was fabulous! Masterfully explained demonstrated, and you even made discoveries and making things easier as you did this. Thank you so much!
@erhenry20011
@erhenry20011 Год назад
Thank you so much. It was like a jigsaw puzzle. Glad you were there to teach me Coach.
@toddemmett9442
@toddemmett9442 6 месяцев назад
Don't have to unplug harnes. Don't have to put assembly inside shell first and try to bolt in after. Can bolt new on and stick whole thing in door. Sorry to critique but alot of extra work
@Jdaddytn
@Jdaddytn Год назад
Thank you, great explanation of what needed to be done. I paid to have this done once. After watching this video I did it myself the 2nd time it went out. I suggest purchasing a good quality regulator.
@APDTY
@APDTY Год назад
Excellent!! We love to hear this!
@theohefko
@theohefko 2 года назад
Thanks so much. Just found a door at the junkyard to replace one I dented heck out of. I'll be watching this again as I move all the parts over to the replacement door.
@airdoc97
@airdoc97 10 месяцев назад
Great video......cost me 450 to have it done at the shop. Thanks for showing me not to even attempt it.:)
@Blue_Basin
@Blue_Basin 4 месяца назад
Thank you for the video it really helped me get mine off
@tombodet5642
@tombodet5642 3 года назад
Thank you. Just what I needed. Question: would it be easier to put the regulator on the door panel when it’s out of the car? Thank you.
@APDTY
@APDTY 3 года назад
There's no issue with doing it that way. As long as you can shift the regulator back into the door since it does stick out a little bit beyond the panel.
@rymehawk
@rymehawk 3 года назад
Thanks for the vid buddy- a mechanic would have charged me a shit ton for that job
@ro19978
@ro19978 2 года назад
Very helpful! Thank you. Now the only issue after install I have now is when engaging the window to go all the way up it automatically goes down own it’s own. 🤷🏻‍♂️ would you know what would cause that?
@StupidRalph
@StupidRalph 2 года назад
Look up resetting power window. Can't remember offhand but the van doesn't know the current position of the window. Try rolling down the window (not auto roll down) holding down the button and wind it back up same way and hold 5 seconds.
@phillipshank2392
@phillipshank2392 Год назад
Not sure if you got it fixed yet or not, but often the power window needs to be 'reset'. Hold the window up switch to drive the window all the way up, and continue to hold the switch for 2 seconds after the window is fully up (closed). This teaches the module the closed position, and the automatic functions should work normally after this reset.
@APDTY
@APDTY Год назад
You may need to reset the limit switch. ON most models, all you do is press the up button and continue holding it for 10 seconds after the window rolls all the way up. Do the same thing for the down button. You may need to do it a 2nd time but it will relearn the limits.
@Joykennedy58
@Joykennedy58 Год назад
What size is the bolts to secure the Regulator and the size of screws to attach the motor to the regulator. For a 2014 dodge caravan .Thank you so much if you can help.
@jonathanriesco1
@jonathanriesco1 Год назад
after replacing the regular and the motor I press the bottom to go up automatically, but when it gets to the top the window returns itself. Why is that? And how I can fix it?
@APDTY
@APDTY Год назад
Hello, All you have to do is reset the limit switch. To do this, press and hold the up button and hold the button for 10 seconds after the window has gone all the way up. Then do the same thing with the down button.
@jimm9577
@jimm9577 2 года назад
8:30 As soon as you get that unit out, SEPARATE The the little wing that the latch assembly mounts to from the inner door panel, give it a little tap and it slide off. It's so much easier to hook the rods to the latch when you can actually see what you're doing.
@hardeharde6854
@hardeharde6854 3 года назад
good job man.
@anthonywagner1556
@anthonywagner1556 2 года назад
I called parts store and they ask me if it's a 2 pin or 6 pin .I never herd of that ,could you tell me if it's a 2 or a 6
@MiguelReynoso
@MiguelReynoso Год назад
They are referring to the connection for the motor. Some have two pins or 6 pins. You got to take off the door and just check the connection on the motor.
@APDTY
@APDTY Год назад
Your model had two options from hte factory for power windows. One option is with the AUTO up down feature, and one is without. THe one with the AUTO feature has a 6-pin window motor and connector. The non-AUTO models have the 2-pin motor and connector. They are not intercahngeable.
@TheBigORanch
@TheBigORanch 9 месяцев назад
​@APDTY For the win! Thank you. Been searching for this answer.
@jamesbrown3813
@jamesbrown3813 2 года назад
Why would my window come up crooked?
@APDTY
@APDTY Год назад
Is this after replacement? It could be the window glass attachment points to the regulator are broken or not attached properly if just installed. It could also be the regulator is broken or not bolted in properly.
@calvinrichardsonsr9192
@calvinrichardsonsr9192 Год назад
How much for the Regulator
@charlesable2792
@charlesable2792 2 года назад
do you need to remve the regulater just to replace the window
@StupidRalph
@StupidRalph 2 года назад
Yep bc the they're attached to one another.
@robertgreen4050
@robertgreen4050 2 года назад
This is not the correct way to do this there is an easier way if you follow this guide you will do more work than is necessary and have more frustration
@williamg4272
@williamg4272 2 года назад
Hmmm. Ok, but what *is* the correct way? It doesn't help anyone to just say it is wrong....
@MiguelReynoso
@MiguelReynoso Год назад
This comment is frustrating and not helpful at all. Hater! 😂
@hobtink
@hobtink Год назад
How about a link to the correct way wherever it is found ?
@Jdaddytn
@Jdaddytn Год назад
It worked well for me.
@garlandmoney9310
@garlandmoney9310 Год назад
Lots of comments like this, but no solutions for better. It seems the consistent direction is to replace the whole regulator assembly, instead of repairing the cables. I guess there is a point where it isnt time effective to go through the process of how-to assemble the assembly. I have tried, and found nothing on how to put regulator assembly together, only swap-out. So be it, I will just buy one.
Далее
would you eat this? #shorts
00:13
Просмотров 2,3 млн
ЛЮБИТЕ ШКОЛУ?😁​⁠​⁠@osssadchiy
00:20
Elevador Voyager 1996 Parte 2
18:06
Просмотров 154 тыс.
El VIDRIO de mi AUTO no SUBE ni BAJA👨‍🔧
9:10
Просмотров 834 тыс.
would you eat this? #shorts
00:13
Просмотров 2,3 млн