2015 - 2020 Ford F150 5 Channel Amp and Sub Install (to Aftermarket Radio)

Подписаться 128 тыс.

Просмотров 91 тыс.

50% 1

Parts linked in the description below!
Watch a full tutorial as a 2016 Ford F150 Truck will have a brand new Pioneer 5 channel amplifier and Alpine 10" subwoofers installed. We will be adding this amplifier to an existing aftermarket double din radio which was installed previously.
This video applies to Ford F-150 models for years 2015, 2016, 2017, 2018, 2019, and 2020. This kit also works for F-250, F-350, F-450, and F-550 models for years 2017, 2018, and 2019. This video also includes dash trim and stereo removal, radio wiring, and installation.
To see this install to a factory radio, click here:
• 2015 - 2020 Ford F150 ...
For the radio Install video on this F150, click here:
• 2015 - 2020 Ford F150 ...
For the front speaker install video on this F150, click here:
• 2015 - 2020 Ford F150 ...
Click here to see the rear speaker install on this F150:
• 2015 - 2020 Ford F150 ...
Click here for the Pioneer 5 Channel Amplifier Unboxing:
• Pioneer 2000 Watt 5 Ch...
Click here for the OFC 4 Gauge Amp wiring kit Unboxing:
• KnuKonceptz OFC 4 Gaug...
If you have any questions, leave a comment below! Be sure to like and subscribe!
Parts Used in this Video (Amazon Associate Paid Links):
*Pioneer GM-D9705 5 Channel Amplifier: amzn.to/3rpyDBR
*KnuKonceptz 4 Gauge OFC Wiring Kit: amzn.to/34QaiuB
*Extra 20' 4 Gauge OFC Ground Wire: amzn.to/2X1e6rX
*Stinger 6 Channel RCA Cables: amzn.to/3vqKFer
*Metra 9 Conductor Speaker Wire: amzn.to/3xK4PSk
*Ford F150 Dual 10" Subwoofer Box w/ Alpine Type S 10" Subs: amzn.to/3DVQfLj
NOTE: If you are keeping the factory radio, we suggest building a T-harness and using load resistors when making your connections to that said radio:
\*AudioControl Factory Radio Load Resistors: amzn.to/3vYgpvd
*4 Channel Pac Line out Converter: amzn.to/3BW0kGL
--If you have the factory Sony sound system and replacing that factory amp, we suggest the Pac
AP4-FD21: amzn.to/3wgGu7x and the Pac APH-FD01: amzn.to/3yr3WSq
Radio Install Parts (Amazon Associate Paid Links):
*Pioneer AVH-W4500NEX: amzn.to/3ptFmK0
*Pac Audio RPK4-FD2201 Ford Double Din Dash Kit and Wiring: amzn.to/3uTTltK
Disclosure: As an Amazon Associate I earn from qualifying purchases

Авто/Мото

Опубликовано:

17 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 87

@ProvoBeastAudio 2 года назад

Parts used linked in the description of the video!

@luciomaldonado8653 2 года назад

T harness link???

@juanorfi3708 2 года назад

Didn’t add the t harness. Pls link

@lincolnmicrophonellc 2 года назад

You have inspired me to go way harder than i was planning to after seeing that enclosure for dual 10" subs 😍

@BURNETTWEALTHGROUP Год назад

OMG You just saved me life with that door speaker wiring. I did not know about that and was dreading my stereo upgrade just because I didn’t want to run all new wires for the doors. THANK YOU SO MUCH for this video series

@e.b.6766 2 года назад

Awesome install… you dressed the wire runs very well!!! Attention to detail; I like that!!!

@nj033 Год назад

Great video and the install was 💯 cleaner than the truck! Lol

@papichino980 2 года назад

Great work!

@81recinos 2 года назад

Very clean instal I wish you were in Texas fort worth area

@al52269 Год назад

Great video. Thanks for sharing. New subscriber here

@linuxserberus5518 2 года назад

ALL RESPECT BRO

@davidgleza356 8 месяцев назад

when you will upload a video for a Ford Ranger 2019+ sound upgrade. That would be great, I'm waiting for it! Thanks for sharing your knowledge.

@SamSam-ke9zy 2 года назад

Where does the sub woofer signal wire come from if its a stock radio? I have an 2016 XLT with the little screen. Your video has been very helpful up to that point.

@ProvoBeastAudio 2 года назад

Here is a video for that! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE--_GPd8Y7yGw.html

@calebstracner4511 2 года назад

I ran the multiconductor speaker wire from my 6-channel rockford fosgate amp to to wiring harness connecting to my factory harness behind the head unit. My 2 12”s work fine, my amp powers on and doesn’t enter limp mode, however my door speakers don’t produce any sound at all. I don’t believe this is an issue with the wiring, but I can’t figure out any other solution. Any thoughts?

@eddieaguirre2845 2 года назад

What crimper did you use?

@osmanyreyes Год назад

Do you have pass the ground wire to the sensor??????? What would happen if you don’t , great video

@iceman89231 2 года назад

not bad at all

@mkbdiy9766 6 месяцев назад

Did the back seat vibrate significantly? Does the back seat bottom touch the sub box? Thinking of adding this to my 2016 F150 but would like children/family riding back there to comfortable.

@ryanhenry3948 Год назад

Do you have a video for the 2015 f150 using factory radio?

@bengrissom5713 Год назад

Im not trying to be funny here. But aluminum is 3 times MORE conductive than steel, but with sensitive electronics on vehicles today and that being a 2000w amp, it would still be wise to have an independent ground 👍

@smitz1240 Год назад

There is a whining sound coming from my speakers and it fluctuates with the rpms but I didn’t ground the battery. If I ground the battery will it fix that sound and also do I have to ground the battery to the same place as I grounded the amp?

@FargoFred Год назад

Great video! I will use part of this. My biggest problem is that I have a 2022 F150 with the bigger 12" screen and no where on the internet can i find a video of them installing this pac unit to the newer model trucks with that big screen. I'm terrified of taking apart such a beautiful new screen without knowing exactly what to do beforehand. Just a thought!!

@ProvoBeastAudio Год назад

Stay tune, we have the next generation video coming up soon

@kingjroyal2896 Год назад

Where do I get extra ground wire ?

@vandotran1698 2 года назад

Hi, I already upgraded 4 speakers. Next step, I plan to install amplifier and subwoofer for my 2021 Ford Expedition XLT (6 speakers NOT B&O system). Could you please give an advice for amplifier, sub and wiring kits as well. do you think my expedition look like 2016 F150 truck to install amplifier and sub? I live in Manitoba, Canada. I appreciate about that.

@ProvoBeastAudio 2 года назад

Here is a good video for that: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE--_GPd8Y7yGw.html

@busnorth 2 года назад

Question i have. Is the factory speaker wires heavy enough to run a lot of power to door speakers or just low power and factory speaker installed?

@ProvoBeastAudio 2 года назад

Factory Speaker wiring generally is all copper, and should support up to a max of 100 to 150 watts RMS. Anything more, you will need to run new wiring.

@daviddeese4161 2 месяца назад

I've recently installed an AudioControl LC5i Pro with a JJ XDM700 5 chan amp. 4 chan to the doors/front tweeters and one chan to a sub. I have the non-sony factory radio. I'm dealing with high white noise floor due to the door chime, backup camera, touchscreen beep volume being amplified. This volume seems to be set in the Ford programming and since I've seen you do installs on many F150s, how do you handle this? Through Forscan? I have a 2015 F150 3.5 Ecoboost non-Sony setup. Thanks for your video series too!

@ProvoBeastAudio 2 месяца назад

Are you using a T harness / load resistors? I need more info on how you've integrated into the OEM radio. This video is integrating to an aftermarket radio, where the other video shows how to integrate into the factory radio: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE--_GPd8Y7yGw.html

@daviddeese4161 2 месяца назад

@@ProvoBeastAudio I'm using a T-harness from factory radio into an LC5i Pro. Since posting this comment I've adjusted the built-in load resistors on the LC5i Pro to 60 ohm. That took care of sending the chimes back to the door speakers but did not help with the high white noise floor.

@shayne0312 2 года назад

Might be dumb question but how did you plug all the RCA leads into the radio what goes where if you don't have three outputs?

@ProvoBeastAudio 2 года назад

If you have a factory radio, you will need a line out converter. amzn.to/3BW0kGL

@clanglois089 Год назад

This is an awesome video. Appears the Axxess AX-DSP-FD2 harness adapter is no longer available. Is there another option or am I too late to this game?

@ProvoBeastAudio Год назад

Since you are retaining the factory radio, check, out that specific video (linked in the description which will walk you through that process). ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE--_GPd8Y7yGw.html

@Robindehood 2 года назад

If you were to do this exact same install, but with the factory radio what else would you need?

@rigoreyes442 2 года назад

Line output converter

@ProvoBeastAudio 2 года назад

Parts also linked in the description.

@ProvoBeastAudio 2 года назад

Here you go ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE--_GPd8Y7yGw.html

@garychin-a-foeng7901 Год назад

Why would you bolt the copper wire (ground) directly to aluminium? Won't it oxidate? For copper/alumiunium connections we need special al/cu-parts

@krehbein 5 месяцев назад

In theory yes, you could use an anti-oxidant compound to be safe.

@Drew-py8kg 2 года назад

Ok, so I just bought this exact box with two kicker 10s instead of the alpines. How is the bass output on this box? any good? Does it give a good thump in the cab?

@choochoochar Год назад

how's it sound, worth the upgrade?

@Drew-py8kg Год назад

@@choochoochar no it was garbage returned it and put in a jbl stealth box with 1 10" lol

@choochoochar Год назад

@@Drew-py8kg LOL thanks for the reply. Thinking about doing my system. I’ll keep it in mind

@moerios04deville 2 года назад

I want to install subs n replace door speakers. What do i need to keep my sync3 factory unit?

@ProvoBeastAudio 2 года назад

Here you go! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE--_GPd8Y7yGw.html

@timrandall4659 Год назад

Any clue where to get the T-harness? Or an alternative. They are sold out everywhere or 300+ dollars if you find it...

@ProvoBeastAudio Год назад

See the factory radio version of this video (linked in description) which has great alternatives to the old axxess t harness.

@mafosa8519 2 года назад

Great share PBAI! Newbie here! Have questions.. That amp sensor on the truck. It can sense amp draws from two different cables? The ground distribution block. Just curious why you didn’t run the cable straight to the amp? Not criticizing. Just learning. Larry

@lb4133 2 года назад

Do you have the part link for the T-harness on factor radio for amp? Don’t see it in description.

@carlose8517 2 года назад

I was looking for the same thing,

@achambers3093 2 года назад

Anyone find the t harness link?

@williamgifford209 2 года назад

Same here. Was looking forward to that. Great video though!

@busared06 2 года назад

Guys, look up LLJ Customs

@luciomaldonado8653 2 года назад

@@busared06 you have links

@904Sharker 2 года назад

Is this possible with the stock sync 3 radio? I love the radio and would rather keep it in place, but would like some subs.

@gr0uch02a 2 года назад

Yes. My 2016 F-150 is Sync 3 and I have an amp and 2 subs under the seat. I am about to rewire the ground, however. I think this is causing an issue dueto the aluminum body. It's annoying. I am wondering why he used the distribution point instead of going directly to the battery.

@todddrawhorn744 2 года назад

@@gr0uch02a Im also wondering why he went to a distribution point instead of directly from battery to amp. Im assuming multiple grounds are better but you also need to be aware of ground loops. Either way thats awesome info to know, that you need to run a ground wire the same size as the power wire to the battery. Thank you @Provo Beast Audio Installation

@ProvoBeastAudio 2 года назад

Here you go: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE--_GPd8Y7yGw.html

@mynameisaric 10 месяцев назад

Aluminum is an excellent conductor of electricity. Copper and aluminum connections should be avoided due to galvanic corrosion.

@gokupop 2 года назад

How was the audio quality from the amplifier

@ProvoBeastAudio 2 года назад

Awesome!

@flightmedic7169 8 месяцев назад

I need to hook up an LC2i to a 2015 f150 Lariat. Do you know what speaker wires I need to tap in to ?

@ProvoBeastAudio 8 месяцев назад

For just a sub output?

@flightmedic7169 8 месяцев назад

@@ProvoBeastAudio yes it’ll be just for the subs. I’m installing two jl 13tw5

@jesusraygoza3094 Год назад

Where did the two black wires come from?

@ProvoBeastAudio Год назад

Lots of wires. Can you be more specific?

@danisucre 2 года назад

How much would you charge for Instalation like this? Labor?

@ProvoBeastAudio 2 года назад

Prices vary based on each shop and location. I'd call around.

@eclypse3d 2 года назад

So 1 question and 1 comment, how did you do the line out to the 6 rca channels? Never showed that did you use an LC6/7I or similar? I noticed you kept your RCA and speaker outputs on the passenger side to keep it from being run over power and ground, only to wrap the speaker wires around the power and ground at the amp? Do not do that especially with a higher power amp like this. That's a no no for possible interference.

@ProvoBeastAudio 2 года назад

We had an aftermarket radio (video in description) which is why an LOC wasn't needed whatsoever. And very unlikely to have interference when your ground has little to no resistance, using quality RCA cables, etc. What we did was just fine.

@ProvoBeastAudio 2 года назад

Use this new video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE--_GPd8Y7yGw.html

@lifeinyoureyes3174 2 года назад

Where are you located? I want you to install a system in my f150

@ProvoBeastAudio 2 года назад

Utah!

@Ww-dl7vr 2 года назад

How did you run the tweeters?

@ProvoBeastAudio 2 года назад

They run in parallel with the mid range door speakers. That video is linked in the video description.

@donearl6675 2 года назад

🤩🤩🥰

@MrCruzito2169 2 года назад

Did you lose any functions with aftermarket radio that were available with factory radio?

@ProvoBeastAudio 2 года назад

Nope, and added a ton more.

@ProvoBeastAudio 2 года назад

Here is a video of the factory radio in place: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE--_GPd8Y7yGw.html

@SamSam-ke9zy 2 года назад

So adding a subwoofer- subwoofer 20% of the cost, amp 50% of the cost, box and wiring 30%. At least thats the gust of what I get from all these videos..