That works great until you need to tow something and spend 2 hours trouble shooting why your lights on the trailer don't work. Not that I learned this the hard way.
I installed a 4D TECH Start/Stop Eliminator on my 2020 F-150 5.0L today. Turn key to "ACC", plug the unit into the OBD-II port, start the truck, and the "A" button reads, "OFF" every time. No more engine shutdowns at stop lights. I love it!
Great looking truck, love the storm trooper look. I suggest you give Forscan a try. You could of disabled auto start/stop from the truck’s ECM. Also disable hyper flash on your tail lights and a bunch of other mods. RU-vid it bru, you will love it.
Sorry, too lazy to read through the comments to see if this has already been said, but: Doesn't that LED light bar on the front bumper interfere/restrict the airflow to the intercooler? (I have an EcoBoost and was under the impression that should be an open airway for the most part)
I installed the SeaLight led high, low, and fogs. I also installed switchback led turn signals. They are a amber turn signal but the switch to a day time running light when the turn signal cancels. They really add to the amount of light at the front of the truck.
With the tail lights/blinkers, you need to splice in a resistor to the new LED lights. LED's consume a lot less power so they flicker twice as fast when you don't have a resistor wired in. I've done it several times. RIP Ken Block
You’re absolutely right! I got new taillights a while ago that came with built in resistors. Check out the video. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-aFEnUKz9FKo.html RIP Ken Block ❤️
Can’t remember the last time I watched an entire 23 minute video. I watched from start to finish. Good video. Gave me the antenna idea. Literally ordering right now as I watch from Amazon. lol.
Catch can is a great mod but it has more to do with direct injection than the turbos. The valves get gummed up otherwise and keeping the turbos cleaner is just a bonus.
Great upgrades and they seem somewhat simple to do. I don’t have an F150 yet but already have my eye on a 2017. More videos like this one would be great.
@@MagargeeFilms it would be great to see top 5 things you like about your truck/ top 5 things you don’t like. Also what are the next mods you have in mind? Talk about how’s fuel consumption?
IJDMTOY LED Cab Lights www.amazon.com/iJDMTOY-Replacement-Chevrolet-Nissan-Toyota/dp/B00S1OD8EM/ref=sr_1_3?dchild=1&keywords=ijdmtoy+led+cab+lights+f150+2017&qid=1604951629&replacementKeywords=ijdmtoy+led+cab+lights&sr=8-3&vehicle=2017-54-666------------&vehicleName=2017+Ford+F-150
Thanks for the love!! Yeah I think I’m total, the upgrades were close to $3,500. I didn’t do them all at once. This is over the course of a year 👍🏼 Progress, little by little.
Sea Light LED Fog Lights www.amazon.com/Lights-Bulbs-SEALIGHT-Xenon-Warranty/dp/B077SGQKQQ/ref=sr_1_2_sspa?dchild=1&keywords=sealight+led+fog+lights+f150+2017&qid=1604951678&replacementKeywords=sealight+led+fog+lights&sr=8-2-spons&vehicle=2017-54-666------------&vehicleName=2017+Ford+F-150&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEzN1VBRjJST001MzJOJmVuY3J5cHRlZElkPUEwNDA1MjMxMlBVQk9IN1NPQUFCOSZlbmNyeXB0ZWRBZElkPUEwOTExOTQ4MVhXTjdXTk40UVlIUiZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=
Thank you! I have the retractable sun shade in all my vehicles! Dash Designs The Shade Retractable Windshield Sunshade, 23" (SV03) www.amazon.com/dp/B01MUBQWHG/ref=cm_sw_r_cp_api_glt_fabc_CRNVMZCTBJXVDSCMA2HS
@@andrewvalenzano3257 I have the retractable sun shade in all my vehicles! Dash Designs The Shade Retractable Windshield Sunshade, 23" (SV03) www.amazon.com/dp/B01MUBQWHG/ref=cm_sw_r_cp_api_glt_fabc_CRNVMZCTBJXVDSCMA2HS
Bro. I love all your ideas!!!! I’ve been wanting to do some upgrades for awhile but just didn’t know what on my 2019. Definitely going to add some more now. 🤠🤠🤠
Awesome!!! Glad you found the video useful and found some ideas for yours!! Would love to hear what you do! Links in description if you need! Like and Subscribe! 🤙🏽
Plasti-dip is great stuff. I did my badges and rims on my '09 and it turned out nice. Just bought a '14 FX4 5.0 that'll be getting that treatment, this week.
So it really depends on how much height your putting on your truck. And if your doing a suspension or a body lift. Both change the Center of Gravity which is why ppl say it affects the steering but the suspension has a bigger effect than just a regular body lift cuz you normally just do about a 2" lift. Thats why suspension lift is more expensive cuz more modifications have to be done to multiple parts over the basic body/ lvl lift kits
Thank you! they are 17x9! They do have an offset as well. Not sure what it is exactly, but the tires have a 1" poke. Hope that helps! Would love to see what wheels and tires you get!
Awesome!!! I did convert the reverse lights to LED but not the turn/ brake. Yorkim Super Bright 3157 LED Light Bulbs White, 3056 3156 3156A 3057 4057 3157 4157 T25 LED Bulbs for Brake Lights, Backup Reverse Lights, Reve www.amazon.com/dp/B01A4Z3FOS/ref=cm_sw_r_cp_apip_sdvN8sK3owOUB
Good video. I have been told by some mechanics that if you have 2020 or newer you don't need a catch-can because they fixed the issue. The start/stop, you just need to unplug it under the steering wheel and that will prevent the truck from auto-turning off.
Be sure the check whether you have a trim on your fender or not Teccom Mud Flaps Splash Guards for 2015-2019 Ford F150 2015-2019 with Wheel Lip Molding Front and Rear 4psc Set ABS Molded www.amazon.com/dp/B07Z1K1RJ6/ref=cm_sw_r_cp_apip_IFHKqBlpERDUd
If you undo the clips for the inner fender and pull it back using a tie down strap, you can sit on the ground with your back against the tire and 'easily' replace the bulbs and dust covers. I found this far easier than laying on the ground and going straight up behind the bumper.
Truck looks good! One question, you said yours was a 2x4 not a 4x4, but it looks like you have a 2h 4h switch, did you change out the coin holder to that or is it something else? Thanks
Thanks! So it actually came with that knob. It’s looks like the 4h 2h knob but it controls the diff-locker only. On the 4x4s, you turn the knob to change the drive and pull the knob out to turn on the diff-locker. But with the 2wd, it just turns to activate the diff-locker.
You’ve got a nice looking truck. It seems like you spent a lot of time on it. Do you have a video on how you plastidipped your emblems. I’ve attempted it before but did not come out as clean as yours.
Thanks for the love! No I have not made a video yet but would like to make one soon! The key is apply the next layer before the previous one has completely dried. That way they bond together. And when you peel it off, make sure the plasti dip is 100% dry and tear away from the emblem (down, up, or to the side). If you pull straight towards you, you’re more likely to pull the PD off the emblem
I did not install a resistor and that’s why the blinker flashed double time with the LED. So I left the turn/brake light with the stock halogen bulb and only put the LED for the reverse. If you want to use the LED bulb for brake and turn, you’d probably need the resistor Yorkim 3157 LED Light Bulbs White Super Bright, 3056 3156 3156A 3057 4057 3157 4157 T25 LED Bulbs for Brake Lights, Backup Reverse Lights, Reverse Tail Lights - Pack of 10 www.amazon.com/dp/B01A4Z3FOS/ref=cm_sw_r_cp_api_glt_fabc_T8SY6GX38TGNGX24DZRV?_encoding=UTF8&psc=1
Thanks for the love!! Yeah heres a link www.amazon.com/Cruiser-Accessories-58150-Matte-License/dp/B073SQ9B2T/ref=sr_1_6?dchild=1&keywords=black+license+plate+frames+industrial&qid=1615331926&sr=8-6
Yo magargee is there anyway you could update links in the description? Cause I’m going thru the links and some work and some don’t work anymore? Ik video is old but yeah. Thanks 👍🏻
One of the first mods I do to any new or old vehicle is the headlights Finally! BLACK FRIDAY is HERE to SAVE the Day! Headlight Revolution has got a killer Black Friday sale for everything in the store! You can snag deals on items for up to 25% OFF! Don't miss out this next week on these great deals while you can! You don't want to wait to upgrade the lighting on your vehicle! Check it out Starting Monday the 22nd!
Glad you enjoyed it and hopefully got some great ideas! Can’t wait to see what you do! Please subscribe! I would appreciate the support! Product links in bio 🤙🏽
You should add these: - rwd rear shocks (Rancho or Eibach) - proper rwd coilover leveling kit (Eibach or Elka) - sway bar (less body roll) - upgraded brake rotors - painted brake calipers - cold air intake - exhaust - body color mirror caps - bed cover - center armrest cover - painted air vent trim and paint correction detail (remove those swirl marks, maybe add a ceramic coating too)
@@MagargeeFilms that's not where the license plate goes on an ecoboost.. for that reason.. don't argue with basic physics. But hey - your problem, not mine. Turbos aren't cheap
@@sargvsu I’ve had 2 ecoboosts and they both had license plates there. And I’ve had that light bar in there since I bought it and no problems. Don’t worry. You’ll be fine 🤙🏽
That is the most annoying feature I have ever seen. I disabled mine by just unplugging the wire under drivers side dash. The only other thing I could find that it goes to is your wire harness for trailers when towing. Mine is a 2019. Not for sure if earlier models are wired same.
@@paulwallace2238 super annoying!!! They make an auto stop start eliminator for 2019s. www.autostopeliminator.com/products/2015-ford-f-150-autostop-eliminator
I’m new to trucks so sorry I’m advance lol. Just got my 2017 F-150 XLT Sport yesterday, and it’s already kitted out. But when you say 33” like I hear 33’s, 35’s, etc. what does that number actually depict? Would it be the outer diameter? Because I have toyo open country tires on mine and they have an outer diameter of 34”
Hey Kyle! Congrats on the new truck! So when you hear 33" or 33s or 35s, thats referring to the outter diameter of the tire (or how tall the tire is when standing up right). Keep in mind that number isn't exactly accurate if you were to get out a tape measurer and measure it for yourself. Hopefully this link helps explain how tires are measured www.lesschwab.com/article/tire-size-explained-reading-the-sidewall.html
Nice truck. But no problem removing and re-using the fender badges. I took mine off and painted them, stuck some 3M tape and installed them again. Just be careful when removing the originals since there is so much adhesive on the back.
@@MagargeeFilms When we need to remove reflectors from the chrome forks on our Harley Heritage Springers, we use dental floss to sort of saw through the adhesive foam. If there are tabs on the back side of the badge, that would complicate things though.
It’s amazing!! Takes like 2 seconds to open up or close, protects the the dash, and keeps the truck cool. It’s also compact and out of the way when driving. Doesnt block visibility at all.
Looks nice. But you might want to upgrade headlights as well. I did Anzo’s. They’re pretty nice. But there are better ones if you do wanna break the bank!! Peace
Thanks for the video. New subscriber. Picked up my 2023 a month ago. Installed an s&b intake, mbrp exhaust and did the cheap vta blow off mod lol. Also added illuminated door sils, interior lighting, underglow and a few others from f150 leds. I really enjoy seeing what others do for their builds. Thanks again
Great video bro! Love seeing everything that you've done with your truck! You gave me a few ideas as well. Love the white and black. Reminds me of my old truck.
I noticed your upper arm after installing level kit is leveled (straight), how, because I installed level kit on my 2017 lariat but still the upper arm facing downward. I appreciate if you share what you did.
Hey Anees, I actually had a shop install the level kit so unfortunately I cannot give you specifics. My basic understanding is you disconnect the shock, bolt the spacer to the shock, and the install it back in the shock tower. And then you’ll need to get the wheels re-aligned. Hope that helps!!
@@MagargeeFilms same here shocks were disconnected and fixed the levelling kit, then did the wheel alignment but still the upper arm facing downward and due to offloading the upper arm hitting the coilover.😥. Anyway thank you for response. 👍🏻
@@85anees85 that sounds right!! Not sure why your upper arm is not level. I’m sorry I don’t have any more advice other than reach out to a tire shop and ask them