2015 PEUGEOT 308 1.6 BLUE HDI HOW TO INSTALL LOWERING SPRINGS😀 (30MM) + NEW FRONT AND REAR BREAKS 😀

Подписаться 695

Просмотров 13 тыс.

50% 1

Hallo again, This is no 2 video of my 2015 Peugeot 308 1,6 HDI, this time we are going to talk a littel about long term ownership and im guiding you to do the front brakes and front spring replacement . There are before and after shots allso of the lowering of the car.
The lowering is 30 mm front and rear.
The new braks are from BREMBO.
The springs are from EIBACH.
Link to the first video below.
• PEUGEOT 308 1.6 BLUE H...
All of the parts are bougt from
www.autodoc.dk/
Partsnumbers:
Front break discs: 09.C658.11
Rear break discs: 08.C659.11
Front break pads: P61.120
Rear break pads: P61.121
Lowering EIBACH Pro-Kit: E10-70-018-01-22
Remember to always check if the parts fits your model befor ordering parts.

Опубликовано:

8 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 97

@MrLercan2000 3 года назад

It is obvious that u are a guy of good taste in terms of car and bike... Enjoy it.. Good luck with the channel

@vmaxviking 3 года назад

Thanks.

@shepardwarren3506 3 года назад

you all probably dont care but does anybody know a trick to get back into an Instagram account? I was dumb lost the password. I would love any assistance you can offer me!

@korbynmicah8796 3 года назад

@Shepard Warren Instablaster :)

@shepardwarren3506 3 года назад

@Korbyn Micah Thanks so much for your reply. I found the site thru google and Im in the hacking process atm. I see it takes quite some time so I will get back to you later with my results.

@shepardwarren3506 3 года назад

@Korbyn Micah it did the trick and I now got access to my account again. Im so happy! Thank you so much you saved my ass !

@oynamalan 3 года назад

You guys are so lucky to have your own garage to work on things.

@vmaxviking 3 года назад

Thanks, we have worked hard for it...

@oynamalan 3 года назад

@@vmaxviking i can imagine.

@mat.borowski89 3 года назад

It looks really cool with this alloy wheels :) I have white 308 from 2014 with 17' Rubis alloy wheels but now I also start to think about buying Rials. Thanks for a great video! Greetings from Thorsø (Midtjylland)! 😊

@vmaxviking 3 года назад

Så tager vi sku den på dansk.... 1000 tak for det. Ja de er pæn fede til den de hjul jeg har på den.

@mat.borowski89 3 года назад

@@vmaxviking helt I orden :) De er mega fæd og bil se lækker ud med denne fælgene på. Er du også fra Midtjylland? 😊

@vmaxviking 3 года назад

@@mat.borowski89 Ja de står godt til den røde farve... Vi bor i det søderjyske..

@djokocarnaud2040 3 года назад

We need more of this type of videos

@vmaxviking 3 года назад

Thanks, but there is not much to do on my car. Have you seen my videos of my Vmax???

@duskobogos2348 2 года назад

Yeah I like your presentation I enjoyed everything you did thank you so much I have a 308 petrol though 1.6 turbo 2017 and I love my car thank you

@vmaxviking 2 года назад

Thanks.

@Antsummerfield83 7 месяцев назад

Thanks for your video, I have just purchased a 308 gt line 1.5 bluehdi and I am looking to buy some lowering springs and for them so your video has helped me to know what I’m up against as I’ve not worked on a 308 before. I was considering H&R springs as the eibach springs said 25 rear and 30 front so I was a little put off by that but you state 30 front and rear? I know the H&R are 30 front and back.

@vmaxviking 7 месяцев назад

Glad to help. 😀😀😀😀

@jesperrasmussen9577 3 года назад

Fantastisk video👍 Jeg vil også sænke min 308.

@vmaxviking 3 года назад

Det er bare igang. Det er ret nemt. Tak for du kikket med.

@kamilwojcik3951 3 года назад

Great video, can you explain how did you unmount black foam at 9:55 covering strut mounting, put something under it and pick it up? or just pull up? is there any plastic mounting kit or something because this black foam is holding very tight.

@vmaxviking 3 года назад

Hey Kamil. The foam i just pull up, mine was not stuck.

@Chris-bv5db 3 года назад

Great video bud, has helped me with mine, I’ve got a GT Line in white with a glass roof, loved it so much I got the majorette gti models bluetacked to the dashboard I have a problem tho, can’t get a Haynes manual and need to know the torque for the front top strut mount bolts, can’t find an answer anywhere, could you please share this knowledge with me :) I’ve destroyed 1 new mount and the other is on the brink of stripping the threads from over-tightening I also would like to upgrade to poly-bushings and coilovers, but have just replaced the standard suspension in the last 6 months so will get a little use from them first

@vmaxviking 3 года назад

Thanks Chris. Yes its realy nice cars, runs great. Coilsovers are a great upgrade, the stock shoks are shit. Mine had big improv just with stiffer and lower springs. But the full set is top dollar. The 3 nuts in the top are 8mm. The spects says around 30 Nm. But its a feel for me. Dont power tight them, No need to.

@Chris-bv5db 3 года назад

@@vmaxviking thankyou so much, I’ve been having trouble getting that information, I love this car and I plan on doing a lot of upgrading in parts, could really use a Haynes manual for it but I’m having trouble getting that too lol 5 years old, all bushings are splitting, I’ve also heard of reinforcing the engine head, but that’s an expensive objective, again thankyou very much, take care of yourself :)

@Chris-bv5db 3 года назад

Hey again, had an issue with they bolts, tried torquing it to 30Nm but the bolt snapped, shows that the OEM top strut mounts are better, the aftermarket ones stripped the thread in the mount, the original ones snapped the bolt, I’m having no luck with this car, recently found out that the anti roll bar bushes aren’t simple to change, the bar comes with the bracket fixed by a metal plate underneath, I look forward to the release of ‘Any’ uprated parts for this car :)

@vmaxviking 3 года назад

@@Chris-bv5db hey Chris. Sorry that you are unluckey with the car. Like i whrote when you thigt the nut ore bolt its a feeling in your hand. I only use a thorqe wrensh on my wheel and in the engine. Yes some parts is a paine to replace on some cars. But back in the day some 20 years ago things was alot more complicatet to replace. Nice to here from you.

@davewhelan9022 3 года назад

Errrr good review

@vmaxviking 3 года назад

Thanks.

@naon6373 3 года назад

Hi. It was very useful,thank you! Can I ask you a question? It appears in about 19min and 24sec of this video. Where do you set the trolly jack and jack stand?

@vmaxviking 3 года назад

Hi. I always use 2 wooden planks that i drive the car up on, this gives you better view under the car, then i have a small wooden plank 30x15 cm that i use for my trolly jack, you can lift the car on the panel under the door, use the wooden plank to even the load of the car, when you lift the car there you also lift the rear wheel. Alternative you can lift the car on the forwad controlarm, that is also were i place the jack stand. But be careful.

@naon6373 3 года назад

Hi.Thank you for your advice.I’ll try that. I'll keep it in mind.

@javc7433 Год назад

When fitting new front spring , does it matter which way they go on , i can't tell which end is the top or bottom , also i assume there is no left or right spring , it can go on either side ?

@vmaxviking Год назад

If you have writing on the spring, then mont it so you can reed the text. The springs are the same left as right. 😊😊

@javc7433 Год назад

@@vmaxviking Thanks !

@rocketstance Год назад

Hi, what is the size of the tires? 235-35/19?

@vmaxviking Год назад

That right. 🎉

@denzek8999 2 года назад

Fed video👍 Kender du max størrelse for dæk med fælge? Har selv en 308 2013 125h t9. Ved ikke om 235 vil passe på min model

@vmaxviking 2 года назад

Er ikke helt sikker på at 19 vil passe på din model.

@denzek8999 2 года назад

Er det 18" på din bil?

@vmaxviking 2 года назад

@@denzek8999 Nej, de er 19 tommer.

@denzek8999 2 года назад

Troede ikke der var forskel på Diesel og bezin modellen. Min ligner nemlig din på en prik. Men jeg spørger selvfølgelig fordi jeg selv er i tvivl, så tak for hjælpen🙂

@vmaxviking 2 года назад

@@denzek8999 Som du skriver er din en 2013 model, min røde her er 2015, de er ikke de samme vogne. Benzin og diesel kører med samme hjul.

@Antsummerfield83 7 месяцев назад

Hi, you know the bearing I’ve noticed it goes thin then thick, does the thick part of the bearing sit where the coil spring ends as I’m doing my suspension currently and noticed on the old springs the coil ends in a different place to the new 1s so I need to know 100% where the thick part of that bearing should be sitting. Thank you

@vmaxviking 7 месяцев назад

Hey, its some time now sins i have done this, but as i remember when you put the spring on the bottom gide plate, then the top bering also has a gide plate that can only sit in one place, im not 100% on this, but the way the top bering is mountet on the body, also give you the way its shoud sit. Hope it helps. And remember to mark it up with a marker another time. 😉😉

@Antsummerfield83 7 месяцев назад

@@vmaxvikingI was going to mark it up but totally forgot, I just don’t no if I need to position it the same as it was or different because now my new spring coil ends to the front where as the old 1 was to the back. So with that said do I need to move the top black thick part to where it was previous or have I done the right thing and moved it to the front where the coil ends. Or does it matter at all? Thank you for your help. My shocks are currently of the car and new springs on. I’d like to rectify this if I need to before i install the shocks on the car tomorrow

@Antsummerfield83 7 месяцев назад

@@vmaxviking also there is no gide plate for the top the black plastic bearing can sit in any position. Which is why I’m confused as my new spring is sitting different (coil ends different place than before) so I was thinking the black bearing should sit in a different position

@vmaxviking 7 месяцев назад

@@Antsummerfield83 If i was in your naborhood i could have popd by you and help to fix it, but im here in Denmark, so its not easy over this platform, you have to try your way forwad to see if its sits right. Next time remember to mark it or take some photos, and last tip, only make one side a time, then you can allways have a look at the side you havent done yet. let me know how it goes. 😀😀😀😀

@Antsummerfield83 7 месяцев назад

@@vmaxviking sorted it, there are 2 small plastic pegs on the black bearing that line up with the metal top strut 👍. Although I strapped up both sides with rope this morning I lost gear box oil 😖

@levitompa 3 года назад

Nice job 👌👍

@vmaxviking 3 года назад

Thanks

@ReyKuba 3 года назад

Hi friend. A great video. Super interesting. A huge greeting.🙏👍👍

@vmaxviking 3 года назад

Thanks, and the same to you.

@alvinmwangi 3 года назад

U said the front shocks are very small and they tend to fail, could u clarify what u meant by someone should get a suspension kit? Aftermarket kits or is it an option from Peugeot itself?

@vmaxviking 3 года назад

Thanks for the comment, Yes like i said, the shocks are very skinny, that meens that they will fail after som time, if you buy a Bilstein sub kit the car wil handel sooooooo mutch better.. The origanel shocks are made to fail in my opion... Hope it makes sens..

@alvinmwangi 3 года назад

@@vmaxviking totally makes sense, thanks for the reply. Any chance u might have a model number or link for the bilstein kit u might suggest?

@vmaxviking 3 года назад

@@alvinmwangi Tjek this out here.. www.autodoc.dk/reservedele/chassissaet-fjedre-daempere-10470/peugeot/308/308-ii/100836-1-6-bluehdi-120

@kiosque2033 3 года назад

barfect😘😘💎💎👍👍👌👌

@royrabel 2 года назад

Good Video. Can you tell me, where you have placed the jack?

@vmaxviking 2 года назад

Thanks Roy, yes, the jack stand in the front is placed under the lower crontrol arm. in the rear use the rear subframe.

@ellisgame9210 Год назад

Where did you get them wheels bud? 🔥

@vmaxviking Год назад

www.daekonline.dk/cw/rim-selector?type=alloy&season=so&vehicle_ids=150109175714681964%3A%3A0002

@kimandersen8515 3 года назад

Hej. Hvad er det for et sænknings sæt du har købt? Kan se mærket. Men hvad er det opgivet til at sænke i mm. Eventuelt varenummer 😉 for det ser sku da godt ud 💪

@vmaxviking 3 года назад

Det hele står i beskrivelsen for neden. Vare nummer og hvor meget den er sænket. Tak for du kikket med.

@kimandersen8515 3 года назад

@@vmaxviking ja det kan jeg da godt se nu 🙄 men tak for svar. Hvordan er den at køre i bag efter? For syntes jeg har oplevet på andre biler, at de bliver meget hårde / hopper hen over vejen.

@vmaxviking 3 года назад

@@kimandersen8515 Den blev lidt mere fast i det, en forbedring syntes jeg. Problemet er at standard støddæmper og fjeder er totalt skrald. De er okay hvis man bare tøffer afsted og ikke forlanger at have kontrol over undervognen. Skal du have det er det nye støddæmper og fjeder. Den bliver naturligvis mere hård at køre i, men man kan ikke få alt. Har solgt den for kort tid siden og har købt en Mercedes i stedet for, den har AMG undervogn, men syntes den var for høj, den har jeg også en video med på kanalen. Peugeot, en står hos en bil handler i Øster Høst.

@Stephen1986ism 3 года назад

Hey man can you tell me what rear brakes you need for that car? Thanks.

@vmaxviking 3 года назад

Hallo, S Simpson, i have made a list of the parts for you in the description below. Happy new year to you.

@mihajlovicrus 3 года назад

Hi, what brand are those rims? Thank 👍

@vmaxviking 3 года назад

Its call RIAL LUCCA www.tirerack.com/wheels/WheelCloseUpServlet?target=runWheelSearch&initialPartNumber=LUC80833AC231BMF&wheelMake=Rial&wheelModel=Lucca&wheelFinish=Machined+w%2FBlack+Accent&showRear=no&autoMake=Alfa+Romeo&autoModel=Giulia&autoYear=2017&autoModClar=

@lam49 3 года назад

Nice, i like the wheels

@vmaxviking 3 года назад

@@lam49 Thanks...

@Randomguy-ld7rr Год назад

7.20 ? when can I get this plastic part

@vmaxviking Год назад

Your local peugeot dealer. Or try your local 2 hand parts pusher. 😀😀

@Randomguy-ld7rr Год назад

@@vmaxviking ty

@kiosque2033 3 года назад

nice car broo💎👍

@vmaxviking 3 года назад

Thanks broo, glad you like the video.

@kiosque2033 3 года назад

@@vmaxviking I liked the work it does. I also own a Peugeot 308, but it is not a pretty red color like yours🌷

@vmaxviking 3 года назад

@@kiosque2033 Thanks broo

@pashaxodessa 3 года назад

How’s the fuel consumption ? City and highway?

@vmaxviking 3 года назад

In average it does around 20 km per liter diesel. Haven done a higeway run from Hamburg to the Danish border, speed around 170-190 kmp, there it did 18 km per liter. Then i have don a long run with around 80-90 kmp, that gives around 26-28 km per liter.

@christiann7320 3 года назад

A little too many issues in my opinion. I have a 2007 honda jazz, gd1, was thinking about this peugeot but the SW version, now idk. It seems a little unreliable as my little honda has done 140k km since 2007 (1 owner car) and i have only replaced the alternstor on it, and some suspension bushings(bad roads where i live), only issue on it is rust, thats why i need s new car...

@vmaxviking 3 года назад

In all cars there are some problems, Hondas are very reliable in general, the things you have replacede on your Honda are still going in The 308, The front shoks on the 308 are from the factroy to small and bad. In general the 308 mk2 is a good solid car. But not with out faults, like all other cars. Happy new year to you.

@christiann7320 3 года назад

@@vmaxviking not saying the 308 is a bad car at all! It looks very cool, it's just, I don't need all the features one has, and I'd probably be just as happy with a cheaper car. Honda may be reliable, but the rust is just as bad as having an unreliable car. Happy holidays and a great new year to you too!! (

@vmaxviking 3 года назад

@@christiann7320 If all one needs is a transport for work ore smal trips, then yes a cheap car is all one need. I have a 2010 Seat Ibiza for work driving.

@christiann7320 3 года назад

@@vmaxviking what engine? I was interested in 1.2Litre tdi ibiza too

@vmaxviking 3 года назад

@@christiann7320 It´s a 1,4 petrol, runs great, i have replaced the timing belt and made a major service on it. In all it´s and okay car.