2016-2018 Ford F150 3/5 Drop 26" Dub Wheels Djm Suspension Belltech Reklez 

Thanks for showing love to us Ford guys too. Love what you guys are doing, keep up the good work.

Buy Parts Online www.reklez.com Quotes: Call us (832) 770-4366 Mon-Fri 9am-4pm Central Time.

97-03 f150 regular cab 5/8 drop I like to see that!

I’d always put 26s on my F150 until I realize that there’s not much cushion on the tires that my entire truck is riding on. If I hit a pothole or run over something sharp then there’s really not Lunch meat from the tire to the rim to absorb the impact. So I switch to 24s which is perfect and safe

I wish you were in south Florida...

Great video! Very informative and the trucks are badass!

How did you do a 5" drop in the rear? All I see is a 3/6 kit on the djm website.

I personally would go with 22’s

Damn that black one is very nice.... Good work

I have a single cab 2016 f150 4x4 trying to lower it to a 3/5 any help

I have a 2015 crew cab. I do some towing. Wanr to lower it, but want a confortable ride. I also do osme towing. About 7,000lbs. Debating between the 2/4 or 3/5. Any recommendations

You guys ever had to trim crash bars to fit 26? I have 3/5 on 26” with 305/30 and the crash bars rub. Not sure if I want to cut them off.

Those DUBS are pimp!

Hi I have 2018 f150 xlt 4x4 i lake to low kit what do you recommend

What do you think of a 3/6 djm drop kit with bell tech street performance shocks

What are those black 24” rims called

Have 2018 f150 trying to figure if I want the 24x10 on 35’s or 305/30/36 on low pros 🤷🏽‍♂️

Any loss in load capacity as far as bed load?

I have a 2014 F150 Single Cab what the cost for a 2/4 drop

So with the djm flip kit is the rear end supposed to stick more to one side I need help with this please

How to do a 3/5 drop on a 2009 ford f150 4door

I got the jdm kit 3/5 installed on my 18 f150 regular cab. I don't like the calmax 2200. The ride is to rough, can I switch to the Bilstein B8-5125.

Is there like a 4-6 drop? I want to get rid of the fender gap on my truck. I have stock 20's 275/55/20

Have you ever done a 4/6 drop on a new trucks 2019 Ford with 24s

Dumb question, but wouldn’t this work on a 2016 fx4, wouldn’t it be the same suspension geometry as the 2wd?

I like to see the work

I would like to see a how to, or step by step.

What was the cost of the 3/5 drop on that single cab? ballpark cost

Do you guys also do the driveline angle??

I have 2016 4x4 f150 with the belltech 1001sp setup with 2/4 drop. I would like a 3/5 can i do that with the same kit or do you suggest something else.

For the single cab, any issues with the driveshaft and the kit you used? Im looking to use the same parts. Thanks!

I got a 210 platinum 4x4 can I still lower it like the black one?

Any chance of a video on a newer f250 or 350....3/5 drop on 22x14s

You have a drop kit for an 2015 FX4

Is there a 3/5 or 3/4 lowering kit for a 2015 f350 single cab 2wd, gas burner?

Have you guys done a 3/4 drop on a 2012 f150???

what's the part# for the belltech performance shocks for the crew cab thanks

Where can I get my 2017 done? 3-5"

I got 33’s on a 22 wheel want to lower the rear is it possible

What do you recommend for a 3/5 drop? 2016 F150 2wd.

How much does that drop kit cost labor and parts

What’s recommended for a supercab for a 3/5 drop

Hey do you have a better video on the white one drop on 24" im thinking about buying a 2019 f150 doing the same kit on

I would like to put 24s on my 2017 f150 do don’t really want to lower it but I’d like to even the rear so the truck is level any suggestions was planning on just using shackles also why size tire recommendations in case I change my mind an lower it would do a 2/4 drop if anything

Do u recommend 24 beside 26

I recently installed a 3"f-5.5r and it's making a screeching sound. What could be causing it?

Do I need upper control arms cause I did a djm 3/5 on my f150 2004 and the alignment is good but not perfect

What is the tire size on the 24s?

Can i keep my factory springs with a belltech f150 drop?? 1000sp

We’re can I get part for my 2016 f150? I only see Chevy parts on your website

any drive line vibration with this drop

1:30 so thats the 3/5 drop?

Avalanche drop kits and prices

How much for a underbed notch?

1:10 what are the name of this rims?

I would like to see more lifted trucks!!

But it's a truck! Why???

26 dubs on 26 tires? Huh???

?

Low profile tires on a truck is idiotic! ( I'm being nice and truthful) Can't go off road and they will be damaged going over potholes! And forget about handling in snow storms. Plus they just don't look good.

Hey guys.. I'm looking to buy a 2015-2017 F150 and doing a 3/5 with the flip kit and front LCAs.. my question is towing with it. It will be my tow pig for my F150 show truck. Will it be able to handle it ok with the flip kit in the rear? I know I'll probably need to add helper bags, but will I need to notch the frame as well? Thanks a bunch.

How much for a crew cab drop like these but for a 13 f150 with install parts and alignment?? Very interested

Hello do you do 2012 F150 Platinum 4x4

I like the video.i have a 2014 f150 4 door and I've put 26 ashanti rims and I have some vibrations in the rear at high speeds and I would like to fix this .also can I drop the vehicle and still get a good ride even at high speeds?

I just picked up my new lariat at the Dealer and want to drop the back to level it out and so I can reach the cooler in the bed with out standing on my toes

Can you guys give me some info on changing 2017 f150 front hubs to 5 lug on 15 inch wheels? I info on any parts available or anything other than wheel adapters.. I dont mind changing spindle of need be.. Any suggestions??

Hi i just bought a 2020 f150 rcsb 2wd and i want to do a 3/5.5 drop. I have a couple questions. Will the 5.5 keep it level or will it be too low? Also in your opinion for the front 3" drop is the contol arms the best way to go instead of the belltech struts? I would like to keep the stock struts and springs if i can. Thankyou

any shims? how did you keep proper drive line angle?

Have you ever lowered a 4x4 16 F150 Crew Cab? I'm putting 26s on it. If you have what brand kit did you go with? Thnx.

Do u sale those red bump stops??

I have a 4/6 drop on my 2020 f150 and want 24 what size tire will fit

What about a 2018 SuperCrew lowered with 22 inch wheels and tires....?

Do you have video of a bagged f150 fx2

How to lower a nnbs! Not any videos on RU-vid. Got a 2012 Silverado wanting to 4/6 drop.

can you tell me what brand those 24's are ? Thanks

Have you guys done a 2017 2wd expedition?

If you can recall. What size tires were on the white supercrew at the end of the video. Thanks in advance

Do u have lowering shackle for tundras

Do lowering trucks cause excessive wear on the drift shaft due to a new angle not designed by manufacturer

Hey man how big can I go on a 2019 Ford F-150 king ranch without it rubbing when I turn ? Can I run 26” like that black truck in this video? Do the changing of them control arm y’all are showing make that possible?

How do the drop effects your towing ability?

You recommend to go with the djm control Arms than using the bell tech struts for a 3” drop?

Wanna see 3/5 drop on 24