2016 Hyundai Sonata with a P1326 Knock Signal range/performance code 

As long as the owner has the software recall done, that specific code "with a knock" automatically qualifies for a new engine on Kia's dime and a new 100,000 mile warranty on the engine block. Just my experience on my 2013 optima @ 80,000 miles. The dealer should be replacing that knock sensor along with the software update.

This my first time watching you and you have a new subscriber. Man great explaining everything

I’m having this issue now with my 2015 sonata. Thanks for the info!

Took my Sonata to the dealership for this issue as it's still under warranty. They're replacing the engine

Just an update: My daughters 2011 optima LX 2.0 turbo just was approved for the new engine replacement, after $1800 in related or unrelated issues. The car started shaking like crazy engine and battery light started flashing and died after 2 1/2 hrs the set her up with a loaner until the work is complete. So two cars new engines in under a year. Why did I buy an Audi lol

I liked the video and apreciate the honesty.👍

I’m in Fort Worth. I have the same error. Car won’t accelerate enough and is making a small knocking noise. Haven’t felt comfortable driving sense. Trying to figure out the cheapest solution but also worried to take it anywhere as it feels like it might not make it back.

I have a question why is it that the 2011,2013,and 2014 Sonata And tend to burn so much oil that (ive seen 4 of these so far) They can and have run out of oil after 400 to 800 miles after an oil change? And 3 have ruined rod bearings and lunching the motors !

This engine would be covered under a lifetime txxi warranty b/c of the class action lawsuits

Hi good video. I recently just had this code today p01326. I noticed a noise like timing chain or rod when it would Rev limit on limp mode. Car has always ate up oil. Idk if my 2015 limited 2.0t is covered as its out of the normal warranty. I sure hope hyundai does the right thing and fixes it by update or engine replacement

Thanx for making this video

If this were true then Hyundai would of done this rather than change the engine.

I just recently had a software glitch that triggered the p1326 code no knock... it was merely a software glitch they reprogrammed the software in the computer and no more false reading car has 188000 miles and recently had alternator fail... they reflashed the computer on my kia and no cost to me

How can I tell if the knock sensor software was done? I took the car a 2013 Elantra in for the rod knock noise. They did a diagnostic but never gave me paperwork showing what was done. Is there a way for me to tell if the update was done

Hyundai really needs to come out with a sonata V6 Toyota has a V6

My advice to friends and family with European or Korean cars. Don't keep them past warranty.

Hi I have a 2014 Hyundai Santa Fe sport and I am having to see issue with this car. What would you think would be my issue?

Wish we had good honest people like you here in Philly man.

Those 2015 Knox senor and limp mode are only for the 2011 -2014 hyundai sonata 2.4 and 2.0T rod Barning Clearance. 2015 hyundai sonatas are alot better from what am reading. Different engines well slightly. Mine is a 2013 2.0T eith 148K and just changed sensor and still going to limp mode very annoying

I Hyundai sonata 2015 using lots of oil it’s only 106000 miles on it

You are awesome 👏🏼 We did the knock sensor on a 2013. I stumbled onto your video and found the TSB I needed! Thank you brother. And thank you for leaving mistakes in there it does help too 😉❤️✌🏼🌎

I appreciate the honesty and the follow up; what a great video. For those reasons you have a new subscriber :) Keep up the good work!

Man I have this problem right now. Very good explanation, I wish you the best of luck. Thanks for the video

I’m having same problem with my 2016 Kia Soul. I’m going too reach out personally to you. Asap I live in the same area! 😅

I had the malfunction indicator and the programmer say that occurred normally and you need to erase that or install software on your car , he did that and the indicator disappeared and l still worry about that , any ideas and thanks for your time.

So did lady get car fixed after that adapter

Much respect I learn from my mistakes aswell thanks for leaving it in the vid

They don’t want to change my engine cause is salvage cae

Always make sure all recalls have been done. Especially the one for the knock sensor. Makes a difference on getting a replacement engine.

Hi did her light come back on afther doing this ?

Do 2014 Elantras have the same problem??

If it is interference...seems like it would be easier to wrap the existing harness with something to block emf.

2013 hyundai santa fe 150k millage, had the same issue, replaced the knocking sensor and the problem still present, i gave up and took it to the dealership and ( they replace the knock sensor and an update to the ecm ) free of charge. car been fixed.. been a week no issue.

why not reroute the original wires away from the source of the induced voltage?

Watching from Killeen Texas

Hi I have a 2014 Hyundai Santa Fe sport and I am having to see issue with this car. What would you think would be my issue?

good video and your a right of showing mistake that the one that helps other .thanks

My has p1326 and knocking and my car has warranty so should i take it to kia and have them replace the engine or what you think they will do

I been driving in limp mode for a week. Car is fine, just a back sensor or something. And after a wash

Greetings,I currently own a 2016 hyundai sonata and it’s currently in the dealership. The engine failed because it didn’t emit the check engine light,it was because of the same recall you are talking about. Can the dealership perform the recall even if the engine is fried? Any info helps and appreciated. I keep getting denied for help. Anyone can help me please?

So what is the car doing in the first place before he replaced the knocks sensor?

thats not the knock sensor you pointed out its located under the intake manifold you pointed out the map sensor

Thank you so much! My car has that same code P1326, 2015 Hyundai Sonata, it did like one hiccup from driving the check engine light came on but everything still seems fine. I’m scheduled to take it to the dealership in 4 days. I hope its a quick fix! Keep all that content coming thanks again for sharing your profession and leaving in the mistakes to learn from!!

Would I need anything special to reset the code, i have the fixd device that let's me reset codes is that sufficient?

How can I get your information, I live in Denton Texas and my 2016 hyundai sonata limited is showing that same code

I had the same issue with my 2016 Sonata 2.4L, and after reading the comments on this vedio, I took it stright to Hyundai. They ask me for a carfax and service recepts. I gave them the carfax, but I was missing some recepts, and they still replqced my engine under the warranty for free. They said there is no specific warranty on the new engine but if anything goes wring I could always come back. This process took almost two months, but still worth it! Good luck to all Hyundai and Kia owners dealing with this recall. Note: My car has a clean title. I am no the first owner. I had already cimpleted the recall before the engine faliure.

good work, which autel scann tool you have

I called my closest dealer and he told me they won't sell this part because it is part of a recall campaign...😮😮😮😮😡😡

my sonata got the same code, would this be causing it to not accelerate past 60 mph?

The check engine light flashing due to knock sensor and constant knocking might be due to several reasons. I own a hyundai sonata and I had this problem. But It was nothing to worry about the engine because it was a factory recall to UPDATE the Sensor Software. Initially the local autoshop told me to use the engine warranty and get a new engine while the engine was totally fine. So, I gave the car to Service center and they Fixed it for absolutely NO COST!!!

bro !! the video was so helpful thank you for also adding the mistakes !!!

hello hey what is the voltace on knock sensor wire

Good to know cause this P1326 also showed up in my Santa Fe. There was no shaking, just a blinking Check Engine Light and I couldn't go faster than 35 to 40mph. At the time, I had no Diagnostic tool, so I immediately I changed the coils & plugs...oh well. I'm wondering if I should just change this or take it in.

Can you buy a aftermarket turbo kit for a 2016 2.4 sonata sport

Donde tienes tú taller o algún número de teléfono si algien lo sabe podría dármelo por favor tengo el mismo problema con mi Hyundai Veloster 2016 gracias

dont buy Hyundais they are garbage

Is it also a possible fix for a sonata se 2015?

Did this fix the code from coming back on? I’ve been dealing with this for months

Great and very informative video !! many thanks 👍😎

Nice job!

الدم عراقي عاشت ايدك ياورد

Hey I know this is an old video but I have a question about this wiring harness. I have 2017 Sonata that I’m working on with the 2.4 engine. The young lady has the light flashing, car goes into limp mode and the code is p1326. Using my ears it doesn’t sound like an unhealthy engine at all. The symptoms you’re describing are just like the problems she’s having but when I look up this part number and enter the vin it says the part does not fit. But I thought this part was for the 16-18 years and she has a 2017. I’m confused.

Happened to me today been driving my car about a year! Code p1326.. should I replace wiring harness as well as knock sensor??

Thanks, I just got done watching and I have a 2018 Hyundai Santa Fe sport and very similar problems. We will see what happens.

A bad knock sensor is picking up crank clatter-unlikely

Just curious to what do you do with the old wires. Do you leave them out like that or cut them off.

amaizing work brother

if you have a good dealership around you , you can get a new engine with that signal code.

Mi carro entró en modo emergencia pero antes me había marcado el código p01326 y ahora ya no arranca, que podría ser ?

Very helpful video ❤❤❤

Hai bro you knw the hyundai sonata 2017 sport cluster code

Talent and strong character! Leaving in the mistakes so that we don't make them too.

Dallas Auto...When you replaced the old sensor harness with the new harness (from the C2010 kit) you noted that the other end of the new harness had 3 wires, one wire being "blue" which goes to pin 61 on the computer's rear connector which you said was the shield ground. What is different from the old connector? That one had a "black" wire instead in pin 61 which I would assume was also the shield ground?? Was the new shield braid going around both the sensor interface wire ("red", pin 63)) and sensor ground (the other "black" wire, pin 62) on the original harness), or just the sensor interface wire (on pin 63)? After installing the new harness, when you started up the car and revved it up and it ran OK, had you already cleared the P1326 code, or did the "fix" clear the code automatically? If you cleared the code before starting the engine, the car probably would have ran OK on it's own, at least for awhile until the faulty condition was detected and set again. Did you follow-up later with the car's owner to see if the problem ever came back? I am asking this because my car has the exact same problem with only 40,800 miles on it, and Hyundai dealerships here in San Antonio tell me it could be months before they can even look at my car to troubleshoot and verify the problem. As a result, I cannot even drive my car because of the possibility of causing possible extensive, irreparable damage. I would really appreciate a reply. THANKS!

Thank you so much!!!!!! God bless you

Would this be the same on a 2012 Kia Sonata? Mine runs but has a prominent knock. I have heard everything from timing chain to lifters to rod bearings.

Where’s the pdf

Hello! Thank you very much for this video! How I can find that part for Kia optima 2013?

The owner of the car should take it to Hyundai dealership to get the engine check for Engine Bearing Clearance Test done, because that’s a loud knock, that loud knocking maybe cause by bearing clearance problem.

Do you know if this harness works on the 2015 Sorento?

‏سلام عليكم صديقي أنا عندي نفس المشكلة

Good video, thanks👍👍🙂

They do a bearing test

This happened to me today earlier today. Tried to set up an appointment with the Hyundai dealership and can’t even get one for a few weeks. Crazy that I’m in Fort Worth too. Haha

يا مهندس انته وين شغال

Does the knock sensor require replacement of the harness as well?

Algún número de teléfono osi algien sabe la dirección de su taller

How much did you charge to install this part ? My 2013 Hyundai has same code and I’ll pay you to install it

تستخدم الواتساب انته

Last week I took my 2011 Sonata in to the dealership to have all the recalls taken care of, which includes an ECM update, anti-theft software, airbag sensor, etc. Less than a week later, I'm driving down the road when my engine basically sputters off. I pulled over, did a diagnostic scan, turns out it's the knock sensor, code P1326. Costed me over $400 to have my car towed home. How did this happen if they supposedly addressed all my recalls and did a multi-point inspection less than a week ago? Isn't this knock sensor a recall item? Thanks