2016 KIA Sedona Headlamp replacement 2 minute process 

Went and bought the H7 bulb and just followed your instructions and it took me less than 10mins to change it. Thanks 🙏🏻

A 1-1/4” 12 point socket works beautifully fitting over the fixture that holds the bulb in place. It reaches across the two tabs and let’s you loosen that tight rascal. I used a 1-1/4”socket, a 3/8” to 1/2” adapter and a 3/8 inch ratchet with a flex head and I couldn’t believe how easy it was. I loosened and then tightened it using the same tool.

This worked great. Its super cold here now and taking clips out the traditional way I was worried I would snap them. Your video helped me not have to take off those panels. Awesome job.

I couldn't get my hands in there so I used an inch and a quarter short socket and slid it over the tabs that holds the headlight once you get the cover off and I was able to get enough leverage to turn it really easy.

The lights from Kia lasted for almost 5 years!!! This bulb from Adv Auto only a year as well. I can’t get my drivers side off. I need a left hander. 😂 thanks for the video

Great vid, will be attempting LEDs in our Sedona shortly. I highly suggest them, the light they put off is crispy clean 🤙

I had my mechanic replace the driver side low beam when I took it in for other work and I had assumed he'd replace both...... Haha! The passenger side light went out days later! I got a set of two brighter replacement bulbs and replaced both. Super easy except there's practically no room for my hands! The key advice is to practice putting in the harness before removing it completely since there is no room and it is impossible to see!!! Once I got the feel for that, literally, the job was a piece of cake.

Works great. Thanks for posting!

Great vid. It helped me get started but if you have HID you have to remove entire headlight assembly. The bulb is actually screwed into the housing with 2 Phillips screws. It wasn’t super hard just some gentle wiggling. Also you can access the fog lamps easily with the headlight removed.

Worked perfectly. Thank you sir.

What worked for me: loosen all the bolts as you did in your first video but do not pull out the plastic lens. This will give you an extra half inch of room without having to worry about breaking the lens. If bulb is stuck tight use a 1 and 1/4 socket on it to remove. Place back by hand, replace bolts etc and your done.

thank you!! perfect instructions

I was able to change mine with ease, Thanks for the video. I am a little surprised that Kia left very little room to change the bulb

I used a looped string on a flange to pull on or twist the inner piece off.

Is this for the Sedona's with HID as well?

My thumbs are bad. I used two tools to push and pull the light in a circular motion to loosen.

Can middle seats of 2016 Kia Sedona lx are removable .

I am hoping to find ease with your instructions, every repair shop is quoting me $200 just for labor to put in this $18 bulb 😖

Did you ever find a different bulb

Bulb back side

Passenger side is much harder to do than drivers side. Less room and metal instead of plastic