2018 Benelli TNT 135 | Valve Adjustment

Подписаться 862

Просмотров 25 тыс.

50% 1

I wanted to make sure that the valves were properly adjusted on my bike. Service states that the valves should be adjusted around 600 miles. So it was time.
I tried to be as complete as possible but, if you have questions or suggestions on my technique please comment below.
There is a possibility that you could damage your motorcycle by performing this - if you don't have the proper experience consider having a professional perform this maintenance for you.

Опубликовано:

30 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 65

@MarcialWills 5 лет назад

Thank you guys for putting up this video. You just saved me from being scammed: at a local repair shop they were telling me they have to completely remove the motor to perform this adjustment! :o Thanks God I decided no to let them do it, and thank you and your son for showing that it is not required to remove the motor.

@Kevin_Casey 2 года назад

The one thing you forgot to mention is what size feeler gauge is the correct gap?

@mikesbo1 5 лет назад

Maybe I missed it in the video, but what is the valve clearance that you adjusted them to?

@dajoaw 4 года назад

It probably on the user's manual

@jeopardy4100 4 года назад

Cold engine valve clearance In 0.08-0.10mm out 0.08-0.10mm

@copatdi 4 года назад

EXCELLENT video. Very clear and concise information with added details when needed. Thank you.

@2quick2come 2 года назад

Hey not sure if I asked this question but the bike idle and dies. I adjust the valve, change the battery, added new spark plugs and it still idle and dies. Do you or your son would know how to fix?

2 года назад

Super helpfull video! Thank you very much! If you have the time, could you potentially also do a video on how ot change the Timing Chain Tensioner? This is something that has to be done at the 16.000km mark!

@kvnmiller 4 года назад

What was the valve clearance?

@lasseiversen5230 3 года назад

.006”-.008”

@braddavis5802 2 года назад

Great video. Do you remember what the gap should be for the valve? Thanks,

@CarlosCardona-q3h 8 месяцев назад

very good explanation......thanks for your time😅

@derickglorioso9060 2 года назад

new benelli rider here. just want to know if the ticking in the engine disappeared? this vid has nice content. keep it up.

@xee5956 2 года назад

can you help me find mechanic's manual for benelli tnt 150i ?

@chegadorchegando5872 2 года назад

What mm for blades?

@LoudContentforFriends 5 лет назад

What are the specs for valve clearance exhaust?? Intake ?? And how to you take the valves on t1 first left with left or right with right ?

@SuperFuryMan 5 лет назад

The valve clearance is Intake:0.07 - 0.09 mm Exhaust:0.08 - 0.10 mm I'm not sure what you are asking in the second question, sorry.

@aneves260 3 года назад

@@SuperFuryMan good a question how does the motor run by hand to stay on point?

@bnolsen 5 лет назад

Looks cool without those fairings. Get a nice looking replacement tank and keep it nekkid!

@joaofranco4892 2 года назад

Que calibración usaron????

@JA-lj9ij 4 года назад

Wish your vid was around when I did my 1st valve adjustment on my Kymco...great vid, very clear, and easy to understand!

@ABMotorbikes 3 года назад

what are the torque settings for the head bolts?

@quicklude6944 5 лет назад

Awesome video guys! I have been waiting for this one. Thank you very much

@Polaris2000- 4 года назад

Hi there. I have 2 questions: 1) Do we need to adjust the clearance of BOTH the inlet and exhaust tappets while the marking is at T1? 2) For a 150cc Benelli, in your opinion, what would be the ideal valve clearance value? I do not have its owner's manual and cannot find an answer online. I would really appreciate a little help here. Thank you so much for the video.

@SuperFuryMan 4 года назад

As far as I know yes you can adjust both. Here are the clearances: IN: 0.08 ~ 0.10mm EX: 0.08 ~ 0.10mm Link to the owners manual: www.ssrmotorsports.com/store/ownersmanual/benelli/TNT135%20Owners%20Manual.pdf

@Thatbobberlife 5 лет назад

How often does this have to happen? I'm looking at getting the 135, 1st oil and valve adjustment seems to be 600 miles in, when's the next one?

@bladerunner198306 5 лет назад

its a break in thing for the engine.. its not like its every 600 or nothing. its a longggggggg ways after that. its fairly the same with all "small" engines. Just look up basic maintenance intervals for pretty much any size motorcycle or scooter and should give you a general reference point and knowledge..

@SpikeyOfficial 3 года назад

Just shared your vid on my recent vid, thank you very much for your really useful video!!

@SuperAngeldavid 5 лет назад

Muchas gracias por tus vídeos, son muy fáciles de entender.

@jaybudget4589 5 лет назад

Thank you for doing this!!!!!!

@SuperFuryMan 5 лет назад

Saw your request on Instagram! Thanks!!

@SXSaiyan 5 лет назад

Thank you, new suscriber cause I have that bike

@SuperFuryMan 5 лет назад

Thanks! Welcome - it's a great bike - a lot of fun!

@nooz2112 5 лет назад

Thanks for the tutorial, very helpful. It's hard to find any videos on the 135 on RU-vid

@SuperFuryMan 5 лет назад

Thanks for watching! Hoping to more in the future.

@dajoaw 4 года назад

Videos of it there are a lot but explaining how maintenance it's done that yeah, it's hard.

@jesam75 5 лет назад

thanks for your videos, very ilustrative

@SuperFuryMan 5 лет назад

You're welcome - I appreciate you watching!

@mrmd5177 5 лет назад

Where did you purchase your benelli. I live in AZ. None of the motorcycles dealers sell benelli.

@albertobastida6968 4 года назад

could you make a video about replacing the spark plugs on the tnt135

@Arvm1007 4 года назад

Wearing sandals is a must when working on your motorcycle

@vinny_mac5756 3 года назад

Hey you live in Arizona correct? I need some help with my valve adjustment on my Benelli 135. I just put in a new cam I need some help putting everything back.

@sunburst8810 3 года назад

tf did you put a new cam in for lol

@GDLOTKIDOG 2 года назад

Isn’t there 4 valves on that motorcycle?

@ajonlandetageovanni6943 4 года назад

Te saludo desde Ecuador pero nesecito toda esa explicacion del ajuste de valvulas en español gracias

@derekandrews5725 4 года назад

I'm trying to get this done but I can not figure out what .08mm is. I purchased a feeler gauge at the auto store but i do not know how it really read this. Is there something specific I'm missing?I have a .004-.025 in inches and .102-.686 in metric

@racylaserjet 4 года назад

Derek Andrews you need another set of guages that has .08 and .10 mm or measurement in between. Technically -.102 is a wee bit out of spec

@Oscarm_fit 2 года назад

Where did you purchase those mirrors?

@kennyrayamajhi2686 5 лет назад

My TNT 135 has the same problem, on the right side of the engine. Could this be a solution? Im not an expert on the matter, The guys at Benelli told me i can only remove or fix it after 2000KM.

@SuperFuryMan 5 лет назад

Typically you wouldn't just hear it from one side of the engine but, I guess it would be possible. I'm not sure why they are telling to 2000Km when the manual states to check the valve clearance at 1000Km. If your careful and take your time, checking the valves is not too difficult - at least you could rule out that as an issue.

@sundownsolutions2 2 года назад

Hi. What is the valve clearance.

@jeremy9612 5 лет назад

Perfect this confirms my buy a bit more I don't want another bike with shims. Still not sure. Grom or benelli

@SuperFuryMan 5 лет назад

Glad I could help. I'm really enjoying my Benelli it works great for me. The seat is a little higher so it fits me nice. My son has a Grom and he thinks the higher seat of the Benelli feels too much like a "big" bike. There are a ton of aftermarket parts for the Grom vs. the Benelli - so if your really into modding then Grom is the way to go for now.

@snazlefraz 5 лет назад

Seems you really love this tnt

@jaredshelton4718 5 лет назад

Why do you need to do a valve adjustment at 600 miles?

@SuperFuryMan 5 лет назад

It is recommended in the owners manual. Not sure why they do it at 600 miles but, mine did not need adjustment - just checked them and they were fine.

@quicklude6944 5 лет назад

It has to be at top dead center on the compression stroke correct?

@SuperFuryMan 5 лет назад

That is correct. You can check that by feeling that slight movement of the rocker arm. My son demonstrated that in the video. If you don't feel that movement you need to rotate the engine 360 degrees. Thanks for watching!!

@fauziari4703 4 года назад

Truee

@R00k_ie 4 года назад

Where did you buy the umbrella corp decal?

@SuperFuryMan 4 года назад

I made them myself. It was a pain to figure out with all the curves.

@davide60639 5 лет назад

Mine has a T2 mark. Is that the point I should be using?

@SuperFuryMan 5 лет назад

There should be a T1 mark opposite from that mark - that should be the one to use.

@gavinr1834 4 года назад

T1 and T2 marking would be for checking the exhaust valves and the inlet valves as both valves open and close on different strokes of the piston. The marking is usually called TDC (Top Dead Centre) this is when the piston is at top of the stroke, so this when either the inlet valves are open fully (T1 )or when the exhaust is open fully (T2).