2019 LandRover Velar All Keys Lost using Autel IM608 Pro2 

Yes

Connect the wire in the pinout test under the chip without dismantle the crystal quartz and condensator. And click read chip status.

​@@MrKevin9834wiring always as unsecured to check for lock status? 3m25J is same as 1M12S?

The same question

2020 model range rover kvm locked 🔒 need to change kvm .

Yes

@@officesmoker1015 I have been doing this since the 80's just automotive. It's the BCM that gets bricked not the ECU. Tells me a lot about you. Sometimes Lishi's either don't work or are very hard to read the depths if the wafers are worn out. Getting codes is almost 100% accurate unless the locks were changed. I guarantee my guys can run circles around you or anyone else. This is all we do all day everyday. My guys are paid excellent and some have been with me over 25 years. All but 1 (my newest guy) are all homeowners. I don't let them work on junk or hoarders cars. I wouldn't send them out on something I wouldn't work on. I turn more junk down than many shops get. My guys make bonus money every month and they don't sell or up sell. We are honest and take care of our customers. We aren't cheap but we use OEM or OEM refurbs. We have the best equipment available. I also help many customers out over the phone to save them a service call. Steering wheel locked, explain how to get the emergency key out of a fob so they don't have to pay us for a lockout etc etc. I diag a lot of things over the phone and if it turns out not to be a locksmith issue I send them to the right people who can fix it saving them a wasted service call. We have made 100's of lost Honda keys and fobs and NEVER ran into this issue until we did. How the hell are you suppose to know there is an issue if nobody discussed it before and we never saw it? Now we know and only use an Advanced Diagnostics Smart Pro as it writes to the BCM correctly unlike Autel. If Autel never told us they don't write the bin file back to the BCM correctly how were we suppose to know this when we never had this issue? I like Autel and they usually have good tech support. It's this one issue I have a problem with. BTW I am the goto guy for auto's in my area for the residential and commercial guys who call for help and or advice. We are in this business to make a profit. We don't use cheap aftermarket crap and we warranty our work. We also don't program fobs for $50 out of our trunks. My customers know beforehand how much we charge. We are in most cases a lot cheaper than the dealer and we come out to them. Trucks, equipment, insurance, salary, taxes, payroll tax etc etc cost money. If you are a one man show you have a different overhead and not nearly the volume we do either. We hardly ever get comebacks. We live in an expensive area so we charge accordingly. Sounds like you are charging handyman rates instead of professional rates. If that offends you tough shit. lol We get many calls the low ballers spent hours on and couldn't get them going. Some complain about why we are charging double than the guy who couldn't get them going. The answer is self explanatory plus if they call back in a year and their fob stopped working I will send someone out ASAP and if it's a bad fob (never happened with OEM crappy aftermarket yes) we take care of it. The people who use the lowballers can't get them to come back out. I'm not afraid to charge our worth. You shouldn't be either.

aftermarket

Yes

@@JoeDLocksmithbut even before you soldered to the board you already mentioned that it was unlocked. How did you know that before even soldering on?

@@Sparkyc511 experience

Any difference between locked and unlocked with akl?

This is kvm programme it another key before i look old soldered

Same Process

No

Reading the mcu, autel knows what number of mcu it's secured

@@famromo9530 I will thx

unlocked means it’s unsecured . right?

Did you mess it up?