Thanks a lot!!! I saved a thousand dollars today!! The fan price at Nissan 900 cad more 300 to change + txs. I bought on Amazon, I paid 150 and I changed in 2h30.
Thanks for your video. On my Kadjar, the fan is not turning freely. I suspect the poor quality of the bearing...As seen on your video,, I removed the sticker on the fan boby and found that it's a Nissan one. Same procedure, I will have to change by a new one...
Nice video, thanks for sharing! Ill try to DIY it this weekend. Will check fuse and relay first, but fan had wobble vibrations just like that one before quitting...
Hey Jimmy, nice tutorial! Can't you remove the screws of the fan from beneath the car? I have the same issue with the X-Trail / Rogue, With the help of your video, I removed all components myself and took the OE part code from mine. I will change the fan when it arrives. The only issue is that I do not have a tool long enough to remove the bottom screws.
Yes the bottom screw is a real pain in the ass. I assuming you're talking about the one that is close to where the ear box is? How I did it was from on top. I leaned over had an extension and I have a rotating ratchet that I use which I think I show in the video. And I just took my time and wound it out. It is a real pleasure lol. Not sure if you can do it from the bottom though I didn't try that. I probably must have looked and didn't see a way but give it a shot you'll get it out for sure.
1. how do know for sure if it's the fan that needs to be replaced? Mine is not turning just as my car is about to 65000 miles. 2. That part about the battery so you don't activate the air bag. I could use little more detail about that. Fan doesn't come on when engage the AC. I still get a little bit of cold air but it doesn't last. I want to check the fuse but it is a bitch to access the panel on a 2020. HELP!
The bolt that is on the driver side or left side of the vehicle down towards the bottom that is on your right while looking into the engine bay from the front? If that's the bolt that you're talking about I remember it's a royal pain in the ass. Basically I have a ratchet that I think I use in the video it is a Twist ratchet basically you twist the handle and the head of the ratchet moves. That is the ratchet that I used to get that guy to spin out as it is really a tight situation. What a wonderful design eh LOL. I hope that helps. You can look it up if you're in the United States under the Stanley brand and if you're in Canada I think Canadian Tire still sells it potentially I'm not 100% sure though because they cycle their tools every three to four years.
Hey my friend unfortunately I don't know the part number. What you can do is call the dealership with you the number and ask them for the part number and then you can cross reference it to see what fan will work. The dealership fan is extremely expensive.
If I'm thinking of the right thing that you're referring to is because they want to have the car come up to operating temperature much quicker. That way it's more fuel efficient and the emissions are less. This is a common thing with many new cars it's called an active Grill or something along those lines essentially there are things that are on a motor mechanism that are generally closed. However if the fan is really crappy like in this case the lack of airflow could contribute to it dying. However I just think it's made of really crappy material and as cheaply as possible. Hopefully Nissan fixed the issue in the later years to come. I believe they have but we'll see you as time goes on.
It all depends. Labour rates all across Canada are different. I know in the GTA there are approximately 140 to 180 depending on the location of the dealership. As for the fan believe it was close to $700 from the dealer.
Sorry my friend I don't know what you might be referring to. If you add a timestamp I might be able to help you. Most of the cliffs generally were for the plastic up around the top from what I can remember.
You do do a fuck of a lot of yapping but were helpful educating me on pulling the nissan plug off the fan, as far as your youtube video making skills ... no comment.
Thanks so much for letting me know. At the time I had done the job there was nothing available. What brand is the aftermarket fan? If you can please leave a link. Thank you
@@JimmysAutoClinic Amazon Qagea Radiator Cooling Fan Assembly Replacement for 2017 2018 2019 Nissan Rogue Sport 2.0L Replaces 214816MA0AQagea Radiator Cooling Fan Assembly Replacement for 2017 2018 2019 Nissan Rogue Sport 2.0L Replaces 214816MA0A -Matches OEM part number for the FWD Qashqai
Hey my friend it is part of the airbox ducting and is most likely called an air box baffle. The best place to get the exact part name would be from Nissan just called them up with your VIN number and they can email you over a parts list diagram where you can point it out.
@JimmysAutoClinic thanks so much! I need to replace mine but have been struggling to find the name of it to look for a part online, and the engine bay diagrams in my manual don't match what the part actually looks like. This is a great video, I also need to replace the radiator fan so it was good to see what's involved!
It all depends on your skill level. I had to do some figuring out and overall it took me about 3 hours but now knowing what to do I say an hour to an hour and a half should be enough.
@@JimmysAutoClinic thanks jimmy! are you able to share the nissan part number for this fan? it seems like on the nissan parts store it has been replaced by another model, but when i check if it will fit my 2018 it says it wont.
Unfortunately I don't have the part number anymore as I threw out the fan. However if you go to the dealership with the VIN number they should be able to give you the Nissan part number which will be able to be crossed reference to the aftermarket world. I know that Valeo is the manufacturer for the fan. It was both on the one that came out and the one that went in which were both dealer products. Hopefully they've started making them for the aftermarket.
