2019+ RAM 1500 6" Lift | How To Install

Подписаться 42 тыс.

Просмотров 56 тыс.

50% 1

Follow along with Jordan as he walks you through how to install our 6" lift system on a 2021 Ram Rebel 1500. This video is a general walk through for our RAM installation that helps give a visual, make sure to follow your provided instructions as certain variations of the 1500 may have small differences to address.
To learn more visit: bds-suspension.com/product?ma...

Авто/Мото

Опубликовано:

4 янв 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 44

@marcosolo6063 Год назад

Great video! Clear, informative pertinent information and no fluff. 💪

@MichaelF1026 3 года назад

Thanks for the video. I'm going to be ordering this kit, or the 4inch for my 21 ram in about a month. Thanks again, from NJ...

@scoopsdaniel 3 года назад

Great video and hello from Canada 🇨🇦

@edwardwilkerson5790 3 года назад

Very informative even though I only did a 3.5 front and 3 rear. Thank you for all the advice

@hmac368 2 года назад

I had an issue with the (33gal) fuel tank skid plate making contact with the drivers side rear UCA relocation bracket. I had to remove the left rear hanging bracket for the skid plate, cut off the corner of the skid plate, and drill a new mount hole through the skid plate for the mount. After double checking all my work, and trimming the skid plate, this caused me a good two hours extra work.

@carlosbishig1 3 года назад

Great video and hello from Puerto Rico 🇵🇷

@diegofedericor Год назад

👍Thanks for the help.

@aa1mike 3 года назад

Nice video.

@lakshmimiriyala609 3 года назад

Lubricate the sachet for easy installation💥

@r_murkz6324 Год назад

What size and kind of wheel set up the black ford have? In the back ground ?

@daveforsythe3718 2 года назад

does this install differ from a 4th gen ram?

@ryanmurray9646 3 года назад

how cone no more upper control arm option? i used it before with coil overs for a little more lift in front.. worked great..

@hmac368 2 года назад

There is still an option to purchase UCAs.

@LogPressPanda 2 года назад

What do you torque the tie rod end nut to? (The nut under the knuckle that holds the tie rod end into place?

@ML00901 2 года назад

I don't think mechanics torque anything anymore they just use an air gun and call it good.....smh

@chinito20fam 2 месяца назад

Well you guys ever do one but for a 2003 dodge ram a quad cab.. want to take it to Mexico and have fun. Get it fixed up and know i habe a amzing setup

@maddrcbashing8999 9 месяцев назад

When you reconnect a track bar do you put the bolt through the top hole or the bottom hole on new driver side mount?

@maddrcbashing8999 9 месяцев назад

Sorry I have the Zone Offroad one it looks like that bracket only has one mounting hole for the track bar mine has two

@mejiamortgage Год назад

I just got this lift kit, did you guys add a new brake line that we have to install as well for the newer kits?

@bdssuspension Год назад

We include a pair of front SS brake lines with this kit. In the rear it uses brake line extension brackets.

@charliegorsuch161 Год назад

I wish Ram would have stuck a solid front axle in these trucks maybe like a Dana 44 or 60 even , that IFS crap is garbage

@btjr2125 3 года назад

Is this install just for the rebel or is it the same for all 5th gen 1500 models?

@bdssuspension 3 года назад

It should be for all 5th Gen RAM 1500 models.

@jessedyeroutdoors 2 года назад

How long did it take To install this kit without the extra filming and stuff like that.

@bdssuspension 2 года назад

We estimate this install to take a skilled shop around 10hrs with the right tools/hoist. More info on the kit, install time/difficulty, and step-by-step instructions at bds-suspension.com/product?ma=2&mo=16&ty=99&yr=2019-2022

@Champ-cq6pv 2 года назад

Do you feel this install can be done by someone with good mechanical knowledge even though I have never done one before?

@Jay-hp6pu 2 года назад

If you’re mechanically inclined sure. As long as you have all the tools and space. I’ve seen quite a few videos of guys doing them on their own. But it does take a while. Especially if it’s your first one or you’re dealing with any sort of rust. Some guys end up taking 8 hours or more because they’re leaning as they go. Doable but if you don’t have the time or patience to spread the work out over a few days like some guys do then you’re better off spending a few hundred to have someone install it. IMO anyways. What’s $300 when you’re already spending potentially $2500 for a good lift kit?

@hmac368 2 года назад

@@Jay-hp6pu if it was only a few hundred, I’d never install my own lift kits. Most shops charge $100+ an hour for labor. I was quoted over $1,000 by two different shops. For that reason, I just did it myself. But I’m fortunate enough to have access to a lift and all the necessary tools.

@treyroberts8124 3 года назад

Same process for the 4" kit?

@natesmith3717 3 года назад

Basically the same thing just different strut spacer

@mehmetbulut2828 2 года назад

So this kit does not require frame cutting?

@bdssuspension 2 года назад

The kit does require trimming the OE LCA pockets, its outlined around @13:30 in the video

@ricardomark5507 Год назад

I installed the lift kit but now my camera not working.. any idea why?

@bdssuspension Год назад

Our kit wouldn't affect the cameras, but not knowing what if any other mods were made at the same time it's hard to diagnose why. Have you checked with the installer?