No video :(

2019 Silverado Cabin Air Filter Remove and Replace - HOW TO - DIY

Подписаться 21 тыс.

Просмотров 62 тыс.

50% 1

2019 Silverado Cabin Air Filter Remove and Replace - HOW TO - DIY
Quick video showing how to replace your own cabin air filter in your 2019 Chevrolet Silverado.
00:36 How to get to filter
01:12 Start Removal
02:19 Remove Glovebox
02:41 Access to Filter
02:52 Remove Filter cover
03:00 Remove old filter
03:35 Reinstall Filter
04:04 Reinstall Filter Cover
05:10 Reinstall Glovebox
I hope this helps, if you have any questions, please post them in the comments.
Thanks for watching...
Grab a My Torino Sticker or T-shirt!! teespring.com/...
I am an Amazon Associate. Please check out my Amazon Storefront. www.amazon.com...
Follow my Instagram: / mytorinoyt
NO WARRANTIES: All of the information provided in this video is provided "AS-IS" and with NO WARRANTIES. No express or implied warranties of any type, including for example implied warranties of merchantability or fitness for a particular purpose, are made with respect to the information, or any use of the information, in this video. My Torino makes no representations and extends no warranties of any type as to the accuracy or completeness of any information or content of this video.
DISCLAIMER OF LIABILITY: My Torino specifically DISCLAIMS LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES and assumes no responsibility or liability for any loss or damage suffered by any person as a result of the use or misuse of any of the information or content in this video. My Torino recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. My Torino assumes or undertakes NO LIABILITY for any loss or damage suffered as a result of the use, misuse or reliance on the information and content of this video.
USE AT YOUR OWN RISK: This video is for informational purposes only. It is your responsibility to evaluate your own safety and physical condition, or that of your clients, and to independently determine whether to perform, use or adapt any of the information or content in this video. Any automotive repair and/or modification may result in injury. By voluntarily undertaking any task displayed in this video, you assume the risk of any resulting injury; your safety is the sole responsibility of the user and not My Torino.

Опубликовано:

25 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 49

@user-xm4dk3hw6z 7 месяцев назад

My 2019 LD was exactly the same as the video. Except mine was a T15. Great video. Thanks man. I first tried to drop the box like the other 2019 videos and found no filter cover.❤

@michaelalexis2954 5 месяцев назад

This video is right for the 2019 LD . Mine doesn’t have the push the sides and release the shock type.

@nickschoenly742 3 года назад

Ok guys this video is wrong. I just removed the glove box no tools needed 2019 silverado. It's very easy. Pull the 2 tabs in at the top, unhook the shock, pull the box upward to release the bottom. Now you can access the cabin filter. Take about 5 minutes

@kOoN985 3 года назад

I believe it's a 2019 LD. Their interiors and exteriors didn't change with the 1500's.

@60plus92 2 года назад

This helped me out, was changing it for my dad, didnt have to take any screws out, simply push in from the sides and it falls out lol

@w2tty 2 года назад

It might not be wrong. It could be the proper way because the other end of the damper can’t fall off (it’s easy to put on if it does fall off), but many of us (me included) take the shortcut 🙂

@dougkaylor2528 2 года назад

he is not wrong. nice video !!!

@jamesduncan2408 2 года назад

He’s not wrong. That is the proper way to do it. Is there and easier way ….yes, but it’s not the proper way, and you also risk a “control arm” (for the lack of a better term) for the door on the glove box to fall behind the glove box thus causing you to have to remove the box as shown in the video anyway.

@gordonlynk1507 2 года назад

Thanks man probably saved me $150.👍

@user-xm4dk3hw6z 7 месяцев назад

My 2019 LD was exactly the same as the video. Except mine was a T15. Great video. Thanks man. I first tried to drop the box like the other 2019 videos and found no filter cover.

@cb2324 2 года назад

This is a correct representation on my Silverado HD truck, mine is a High Country specifically.

@whitstroben589 Год назад

Thanks for the video!

@user-sg4yp3lp8x Год назад

Worked for my 2019 2500HD. Another showed the other type and it didn’t work. Thanks for showing me the tight way. (New subscriber, new to youtube. Great start.

@mdcollins3806 Год назад

😂 “if you can see and not blind and old like me”…lol…..I feel ya brother!!!

@javierluna2510 Год назад

Thanks my man

@MrGreenstar2012 Год назад

@MrPleasant1001 Год назад

Apparently, there is 2 different models GM made. I have a 2019 HD3500 Silverado Duramax and this video is correct. I watched 2 other videos pulling out the glove box - I did that and no filter was showing. Then found this video and took the screws out and went deeper and there it was. So guys, can’t always just say ‘wrong.’ This way was the only way to get my filter changed.

@MyTorino Год назад

Yes Sir. They had the old and new body style for 2019. Or at least what my son in law told me.

@edlopez5768 Год назад

I said its wrong due to the fact that the video says its for the 2019 silverado. Not the 2019 silverado hd

@user-sg4yp3lp8x Год назад

Dead on

@mikeaist6360 2 года назад

My 2019 Silverado was old school. Push in from the sides and the box falls off.

@chupapi9568 2 года назад

Did mine in 10 minutes

@steveclark8962 Год назад

Thanks

@RedCapMan 2 года назад

Thanks for the video

@petebovenzi8119 Год назад

Good video. Thanks. Yer funny.

@brianrondinaro9982 3 года назад

Thank ya man!!!

@michaelkeel4351 Год назад

I have the 2019 new body style and I just punched in the sides of the glove box and it dropped down . Pulled those tabs down and pulled it out and put a new one in

@fredmartine674 2 года назад

Cool video 👍, new subscriber here. Keep showing us any thing you come across working on a vehicle.

@MyTorino 2 года назад

Thanks and glad to have you!!

@freddycastillo5086 3 года назад

Thank u

@njsongwriter 3 года назад

To me it looked like you put it in upside down. The air flow arrow should point down...

@joepiper6064 3 года назад

you are right air points down

@jefflentchner2329 2 года назад

Is the standard filter HEPA??

@adublbeatz8656 Год назад

thanks for helping save us crazy labor fees. $20 part....$120 labor....lol...sheesh

@Sweet68Camaro 2 года назад

The title of this video is WRONG!!! You don’t need ANY tools for a 2019 1/2 ton Silverado. All you do is…. Open the glove box door On the left side, slide off the gas shock Squeeze the sides of the glove box and pull down The filter access panel has a clip on the left side. Slide access panel to the left. Change filter and reverse instructions