2019 Toyota Camry Subwoofer & Amp Install With Stock Head Unit Step by Step 

One of the best videos out there! Installed mine on my 2020 Camry following your video . Turned out great and saved myself 285 for Installation 😇

Wow thanks a lot for this fantastic instructional. You didn't ramble on, you stated a ton of important facts and tips. You kept it simple yet professional. Keep up the good work 👏

Putting my amp and sub in this weekend. Real nervous about the power wire through the firewall because of how little clearance there is, but this helped a ton, thanks a lot man!

So far one of the best videos about subwoofer installation for the XV70 camry

This video was very helpful. One thing that I will mention to anyone using an Audio Control LC2i or above, do no add the left positive and negative signal to the left and right channels of the unit. When turning the unit up at high volumes it shorts and turns off. You will only use the left on left and if you want a right signal be sure to follow these same steps for the passenger side. I believe the right positive is purple and red and the negative is purple and green.

Just A tip. Always use left & right channel . Take the time to do it right

For anyone doing it on a Camry i found it easier to remove the battery and pull the rubber grommet back and feed the wire through

Wow man, you are best, all in one video. As I didn't had long stick and there was less space on left side so I ran the power wire through the right passenger side. There is a similar spot on right ride. All else went well.

Thank you. I’m hooking up a 2014 Corolla. I was originally going to go after market with the stereo, but the backup camera and steering wheel controls was way too time consuming with the two toddlers, so I’m doing this instead. However I hooked my amp up to the right of the fuse (didn’t see this video til now) and even though my remote light wasn’t on, I took your advice and checked with my test light, and you are correct! Power goes to the remote regardless of ignition. Wow! Thank you for that... As far as the RCA goes, I’m splicing into the rear 6x9 with the RCA speaker wires from one end, and females for the male RCA cables to run the rest of the way to the amp. I see the RCA converter you have has some kind of funky looking box... What is that? Because now it’s got me thinking twice about the signal I’m going to be receiving from my 6x9s to my amp. Will it be compromised? Can someone please advise my situation? I will post video when I’m complete. If your input helps me out, I will ring your bell!! 🔔 Have a wonderful New Year, God Bless everyone, -D Griffin

The best place to ground your amp is under the back seat on the left side or right side that is not a good ground on the upper rear deck on the 2018 through 2020 Camry. The output on the stock head unit puts out a very weak signal on the rear channel, you have to tap into the front speakers right and left not from only one side, run a lead from front left positive and negative and front right positive and negative that way your fader works correctly. to find you're positive and negative for right and left use a multimeter, it is very easy. don't go by the digrams out there they are not accurate, they have not come ut with the correct wire diagram for 2018 through 2020 Camry yet.

i learned three thiings from this video and ive done a few installs in my time too so thanks for that :)

6:00 is all I needed

Get the audio control LC2 trust me it sounds better than those budget passive LOC. I had the scosche loc2sl it sounded nice but then I upgraded to LC2 and damn my amp came alive it sounds way better since it has better voltage

I went through the same grommet on mine I put a little lubricant in the power cable and it was much easier pulling the wire through.

when he tried to open the trunk 🤣

Thanks helped me put a sub in my 2018 camry se

Hahahaa. It's sparking because you're suppose to disconnect the negative from the battery ROFL, and most certainly not have the car running. holy shit lol.

I need to run 2 #8 wires from the battery to the trunk for my Ham Radio. This was helpful, thanks

Hi, Is the wiring for rear speaker will be the same for 2021 to 2023 camry SE? The positive and negative wiring

Did you run all the cables on the driver side of the vehicle?

I just want to add my experience I also agree with the person that commented go ahead and run some speaker wire from the right side to that converter you get way better sound quality out of it if you go the extra mile also it is unnecessary to ground to a ground wire on the 18 and 19 there is a bolt right above where he’s working that will suffice as a ground do not tap into the alarm wire it’s black and yellow I swear if you tap into that wire you will never get your lock and unlock right again

Also for anyone that does not have wiring schematics white and green is negative on the right side blue and pink is positive

I have done everything on a car except fuck with speakers for some reason that crap bothers me this will make my life so much easier

If you want to run speaker wire from an amp to the front door and tweeter harness (they're linked/parallel) how do you patch in? Is it the same wire color as the B pillar you patched into?

Low frequency, bass is mono correct. If once can access both left n right speakers. Go ahead and connect both LsndR speakers correct. Otherwise, one can get bass from just the one speaker right? Now w amps w line sensing, you dont connect the remote (blue line)rite?

Making sure installing one isn’t too difficult before I get a new car lol. Seems doable. Would you recommend some kind of switch between the battery and the sub? I never ran anything into my fuse box in my current Hyundai. My amp is designed for car use so it turns off automatically and I’ve never had issues of the battery draining

It’s 4 am and I’m watching how to do this... I don’t even own a Camry. I want one but I don’t have one right now.. weird

Ground need to be on the chachis of the car and need to be sanded out to remove paint so you have a clean connection

Hey man I’m doing this and I’m having so much trouble trying to run the power wire through the groumet I’ve tried screwdriver, knife, clothes hanger, and a arrow and I still can’t find where it’s suppose to come through at under driver side any help would be appreciated

Wished you showed the wiring behind the stereo,wondering if you still have the stock stereo that came w the car because I do and it doesn’t have rca input plugs it’s very basic so was wondering how yours looked

Does the 2018 Camry SE have an RCA output in the head unit? Im installing a compact sub under my seat

just some advice guys it be easier to pull the the power wire the other way. you'd be pulling 2 ft instead of 20ft

I am a little confused, does it matter if you connect the LOC to just one of the speakers rather than both of them?

My rca adapter has a lot more wires and stuff then yours did could you help with what wire is what

Why is your negative terminal not disconnected!? Hopefully that ground is bare metal.

I really appreciate your video, extremely helpful. Im having a few problems with the control wire not working, when i connect them to the left side of that fuse my key fob doesnt work, my dash flickers and it affect my car beeping for the doors being open, i tried reading other comments but i cant figure it out. Didnt know if you could lead me in the right direction. Thank you!

Don’t know if you still check this but followed how you did it and subs work fine not static etc but for some reason now my rear driver side window doesn’t work (no power to it) -any idea? 2019 Camry xse

I have a question since you seem to know more About electrical... i install the fog lights on my camry but I conected the positive directly to the battery meanning if i have the fog lights on and i park and turn off the car my fog will stay on ,, now my question is .. if i conect the posistive to the lighter fuse will it work instead of having the positive conected directly to the battery ?? Please help

Sounds super good bro 💯

I need to install a Ham Radio in the trunk. 2 wires from the battery have to run back there. Would you know where you poked the hole if there are any computer wires that might be a issue for a 100 Watt Transceiver? I am trying to find the best path back to the trunk and at the same time staying away from any sensitive car computer wires. Thanks,

I have a doubt . where is going to the blue wire which you connected to the right side of the fuse ??? Can you explain me plz .......

Hey I followed you exact instructions except running the power wire on the other side of the car. As soon as I turned on my car the amp went into protection mode. Could this be a problem with the amp. It was a amp that I’ve had for 5 years and it overheated a lot. Need help!!

This must’ve been one of the bare-bones Camry sold because the JBL system in the XLE V6 is outstanding.

Anyone know if the same is attainable on a 2017 Camry?

How should I tap into my speakers using a LC2i pro?

Why to poke to the rear speaker and not directly to the stereo? Is it more strong the signal on the back or just to avoid the trouble to remove the radio. Thanks.

Great video

@nester auto repair great video! I tried to pull sound from the same place you were working behind the driver side panel, but I assumed the black and red wires that I found at the speaker were also the same behind the door in that harness 😔. So those 2 wires you used, the purple/white and yellow/white do you think I can pull high level input from those??? And just use high level input??

What amp and subwoofer would you recommend for A 2015 SE with stock speakers... I don't want anything crazy but just something better

Very good video. Any videos where show how the wire looks like before you put the fuse back in the box?

So you only need to hook it up to one of the rear door speakers? Or do you have to wire each one separate or just off of one rear door speakers????

Hola Nestor, buen dia! Tengo un camry 2022 y hace poco le puse un converter para añadirle un amplificador y quedo sonando ruidos. Pensé que sería el converter y no, trate con otro diferente y fue lo mismo. Necesito desactivar los micrófonos del carro?

Very detailed instructions. I like.. Thanks for the post.

You can put the rca inverter in the trunk tap it to the rear deck speakers this way you don’t have to run a long rca cable

did you ever do aftermarket upgrade 2019 toyota camry with the jbl system? thanks for the video, i know it very hard working and holding the camera at the same time.

tapping into the pillars like that, would that affect the impedance?

Are those pre blown or nah?

vercion es español

Do you have any advice on how to get rattle out of the rear deck? In my TRD the rattle is super bad and I have the fixed backseat so I have no idea on how to remove the seat to access the panel to use sounds deadening. Any help will be greatly appreciated.

Hey bro do you know the cablee for the speakers wich is front and wich is back’s

So I did this but I connected it to a 10 amp fuse would that make a difference

Nice. With the amps tuned wilm the stock head unit still delivers nice high in the tweeters still or it's better to upgrade the head unit in the future?

I need some help with mine ? I took it to a shop but I don't think they wired the lc2 right

I have a 2019 Toyota camry just purchased and followed your exact instructions to the tee.i got up yesterday to go out to my car and my battery was completely dead...why is there constant power going to my amp to kill my battery

The output box that you put, would it be able to go to any speakers cables? If there some in the back where where it speakers goes.

I installed the same way you did and the remote wire isn’t turning off my amp

I grabbed a lc2i and tapped into the rear speakers

Buen vídeo gracias por subirlo.. tengo una pregunta, le quiero instalar un subwoofer Ami Camry se 2018 y quiero usar el Jbl basspro hub. La instalación es la misma o se tiene que hacer de otra manera.

No subwoofer 😐 Two 10inch subwoofers from memphis audio PRX. Amplifier PRX 600.1 🙃 ...

Why didn’t you just pull the head unit and get your preout inputs from there? Much easier?

Hey don’t know if you still look at these comments but I wanted to ask something. Do you have any static feedback? Like does a hiss noise come from your speakers? I had my speakers replaced and an amp put in but that created a hiss noise and they said it was because the stock head unit amp isn’t as powerful . To get rid of the hiss they told me I would have replace the stock head unit with an aftermarket one . I would rather not since it’s expensive and the new dash kit I would have to use would ruin the look. So yeah, I was wondering if you had this problem

I have a question, I've installed a after market radio, 2 10" Sundowns and 2500w old school ssl amp running 4gauge wire for the positive and ground. Everything plays well but I keep killing batteries. I killed 2 and decided to remove them. Is there anything that I could be possible doing wrong? Or do I have to upgrade something to where my subwoofers don't kill my batteries? Please I need your advice

Did the subs work well with factory radio?

Hi I loved the video however I did have one question. I have a 2018 camry Se and was wondering if the process would be the same to tap into the back seat speakers?

just used a clothes hanger? or is there something stiffer you can buy to snake?

My amp isn't turning on. Do I need to use the remote port to turn on the amp. I'm using an lc2i pro

Great job bro. Is it the same color on the passenger side speaker?

Sorry late to the vid. But did you use any after market stereo?

Will this apply to 2020 Camry with "premium" audio package also?

Anyone know how can i run power wire on a corolla 2018. Cant find a gromet to do it.

Muy buen video, tengo una duda ese canal no tiene un filtro para bajos" low pass" y cuando se activa el bluetooth en llamadas se escucha por el tambien? Gracias.

Your the best 👌

Also, were you able to put the fuse cover back on?

Does the door speakers still output bass with the subs

Hey bro can you help me I have a question

Hola amigos buen videos tengo un Corolla 2020 se por casualidad tú sabes el colores de los cables de altavoces traseros quiero hacer lo que tu hiciste con mi Corolla gracias

Hello Nestor, do you know if the speaker wire colors are the same for a 2018 SE Camry non-JBL system? Thanks

Is the process the same for a 18 carolla ?

Any problems regarding the mpg's after installation, because I'm having a 3700 graded @ two 40 amp fuses in my hybrid Toyota highlander?

Tengo un 22 xse v6 con sistema jbl la señal se puede agarrar del bajo ?

Thanks man! Make more videos 👍👍👍

Gracias por el video tengo el mismo carro mismo año great video !!

Were is your shop at how much would you charge for the same exact work on my Toyota?

So for the power wire, did you poke a hole through the grommet in the fire wall? Like stab through it? Or did it slide in next to all the other wires?

Would this be similar to a corolla install

its weird because i put my remote turn on wire on the left side of the fuse 15A and my amp doesnt turn off when i turn off my car, is that normal?

Cant you just get a adaptor for the factory line that converts it to positive and negative. From there you use the + and - to RCA. Then from AMP new speaker wires?

Does it rattle? My Camry rattles everywhere especially in the trunk and dashboard.

Men muy bueno el video. Sabes el diagrama de los cables de audio de Camry 2022 SE

How many feet is the wire ? I was thinking or ordering 10 feet cable wire