295/55/R20 Tire size Nitto Ridge Grapplers 20x10 -24 offset Xtreme Mudder Rims 2” ReadyLift Leveling Kit Tinted Front 15% Back Limo @BTS for the help with FAQs
I have seen several different ways to install the 2 inch kit, a couple show only loosing the sway bar and then installing the kit, with the tire off, unless you have a 2 wheel drive. My truck has the 2.7 turbo, which is surprisingly very good. I'll let you know once I do the leveling kit install, which way I had to go for installation. I am also going to eliminate the muffler and go with an aftermarket straight pipe, which I've seen a few vehicles on RU-vid, and it sounds deep. I am going with 33's on 20 inch rims, since they will work with just the lift kit.
Nice truck man, I love the RST and TB models! I have a 2021 Ram Night 4×4 with almost the same stance. The only difference is my wheels are 20×10 wrapped in a 285 60r20 Cooper Discoverer AT3 tire with a -18 offset! Happy Building!🤙
I went with 285/50/20, neg 18 offset. No leveling kit, no lift, I have no rubbing on hard turns, and no trimming. I want to get a little bit more aggressive stance, so I have 1 1/4 wheel spacers going on next.
I just picked up a 2019 satin steel 1500 lt and i want to go with that same size wheel and tire. looks great . cool vid thanks for sharing and awesome Silverado ...
Nice truck 👍 I just ordered 295/50/22 Toyo at3 ( 33.6 inch diameter 11.6 wide ) hopefully they will fit my stock 21 Denali I guess I’ll have to do some trimming now Thanks ✌️✌️🇨🇦🇨🇦
Looks nice! I have the same truck in the dark blueish grey, and with the black 22's. I like the look but hate the ride and want to do a bit of off-road. Thinking about doing something similar, create a Trail Boss of sorts. How did the lift affect the ride? Is it a lift or level? Would you recommend doing shocks also? Thanks for the video
Man I just bought this exact truck. I love that setup and want to do the same exact Wheel and tire size. Is it still the same setup? Would love to see an update
What is the high difference between a regular Texas edition and your RST.? If I install just 2 inch leveling kit could looks like yours? Man I really love those tires !!
any issues with your control arms, joints or anything after you levelled it? I heard the RSTs aren't able to handle them. As far as dealers won't even install them... I want an RST to save a little money, but need it levelled.
Nice brother thanks for posting I’m looking to do the same thing to my 2021 Chevy Silverado 2.7 four-cylinder turbo charge. Question though what was your gas mileage before and after you leveled and put those tires on?
Thanks man. And nice, great truck I love it. It’s my commute daily for work. Luckily I only do 8 miles round trip but have taken to beach and that’s about 300 miles and got great mileage still didn’t even notice a difference. Also my trim level the AFM/DFM comes deactivated already so that good gas mileage was always from v8
Looks great! I have a 2020 RST. I’ve been thinking about doing a 2” level on mine. I worries the front end will look higher than the back after it’s done. Do you notice this on yours? Thanks
Actually got better and I personally think was smoother man. RC is a good brand on more reasonable side cost wise. Very happy with their products everything else I have added is RC just ordered the 3.5 lift kit from them cause I actually want to be a little more higher.
@@emankayspoppa9070 I got the leveling spacer, the install was super easy with those, heard the struts can give you more labor lol and more components you got to loosen and take off so the spacer was good enough for me. Is recommended to get them re torqued about 500-1000 miles after install then you should be good for as long as you keep the truck. I installed at 420 miles I’m at 2100 now and running great!
@@emankayspoppa9070 thanks man. I’m gonna post another one hear soon, added RC bed adding some rock lights in the wheel well and thinking of swapping out wheels.
They actually discontinued the ones I have in the video, they changed over to the ones I attached link below for you! www.roughcountry.com/product/gm-cab-length-hd2-steps-srb01900
I didn’t get to measure it. But I was able to fit in my garage to park it no problem. I sold the truck and no longer have. But it will fit guarantee it 😊