2022+ GR86 Air Oil Separator Install

Подписаться 56 тыс.

Просмотров 17 тыс.

50% 1

Oil in the intake system can cause lower octane which can lead to detonation, a decrease in power/efficiency, and unwanted carbon build up! Make sure you're trapping the oil and keeping the intake system clean with a Verus Engineering Air Oil Separator. This reroutes the lines of the PCV system and acts as an in line filter to trap the oil particles keeping your engine running healthy.
Verus Engineering AOS: www.verus-engi...
Drain Back Kit: www.verus-engi...
Coolant Add-on: www.verus-engi...
Driven Media Merch & Overlays:
► www.driven.med...
► T-Shirt - www.driven.med...
► Crewneck - www.driven.med...
2022 TOYOTA GR86 MOD LIST:
»$35DIY 4th Brake Light: amzn.to/3SRG3L8
»Positaps: amzn.to/3SRAQTl
Bride Stradia III Seats
Sayber Design Carbon Fiber Front Lip
FactionFab F-Spec Coilovers
Cusco Strut Tower Bar Front
Cusco Strut Tower Bar Rear
Cusco Adjustable Lower Control Arms
Cusco Adjustable Toe Arms
Cusco Trailing Arms
Cusco Rear Upper Lateral Control Arms
ARP Extended Wheel Studs
5mm Wheel Spacers (Front)
Yokohama Advan TCIII 18x9.5 +45
Kumho V730 255/35r18
ECUTEK E85 Tune
JDL EL Header
JDL Over pipe/ Front Pipe Combo
AWE Touring Edition Catback Exhaust
FOLLOW ME:
►Instagram: / thekevinvo
»Music I use: share.epidemic...
Disclaimer: As an Amazon Associate I earn from qualifying purchases.

Опубликовано:

2 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 91

@kylebenitez8926 Год назад

Love how these new videos are coming out. Very warm, very cozy, and overall chill vibes. Keep it up!

@KevinVo Год назад

Glad you're enjoying them! Thanks for watching!!

@donewhiskey Год назад

@@KevinVo They're a lot more relatable, to be honest. We don't have lifts and shops, so we struggle to mod our cars exactly like this.

@oregonfelder1 Год назад

Ran the COBB AOS on my 2020 WRX. I thought Toyota direct port injection motors had injectors above the valves to prevent the gum up?

@boost331 Год назад

My thought is.... The car is dual injected. Just let the blowby get sucked up. The port injectors will wash it all clean. No harm done. If adding forced induction maybe I would consider it, but probably not. Lol

@Vitaliy_D_UA Год назад

Exactly

@KevinVo Год назад

The oil can still lower the octane and cause detonation which means you're not getting the most performance, but maybe I'm just future proofing for something that may or may not be coming haha

@biurner Год назад

Will you be getting the JDM TRD GR Rear V trunk chassis brace for your car?

@AFwitchdoctor Год назад

Nice vid! Thanks for all the help with first gen 86 installs.

@KevinVo Год назад

Thanks for watching! Will be continue to do 1st gen installs on the FRS when I can!

@jaxgarage6302 Год назад

Nice! I hope to do one of these and a jackson racing oil cooler eventually

@KevinVo Год назад

Highly recommend! Both great products!

@ramagr86 Год назад

Don’t stop making content bro ❤

@ttt3377 Год назад

She just needs some ap racing brakes from your old frs and she would be done 😩😩😩

@MUFC98100 Год назад

Damn loving the music vibe! Has that Gran Tursimo garage mode while choosing you car to race with! 😂

@KevinVo Год назад

I'm loving the chill vibes!

@blindcelery1839 Год назад

Still great content, keep it up man

@icywolf871 Год назад

Could you please do a video on what the best Turbo kit out is or rank the different kits cus I definitely want to Turbo mine but don't know what's out there also a brake kit for the car what fits etc

@marquescreedassassinscreed3307 Год назад

Hey Great Vid! If you don't mind me asking...what camera are you using? Your videos look so clean.

@Chickentenddies Год назад

Keep the builds coming Kev. We’re here to support your new brand. Nobody else on RU-vid is doing a series on a GR86 as well as you have, there’s honestly no competition imo. Now that it’s full bolt-ons, are you planning to do any forced induction in the future?

@KevinVo Год назад

I'm going to play around with some different exhaust and intake setups to see what I like best and then maybe I'll look into it in the future. Right now, I really don't have the means to do it. Truly appreciate your support!

@esko23q Год назад

Why does this look harder to do than the bushings videos lol

@donewhiskey Год назад

Anyone else call a wobble a swivel?

@arefinlabib4630 9 месяцев назад

A man with his GR86 in his not too big or not too small garage, tastefully modifying away his GR86 and making quality videos.

@ArmySigs Год назад

I can't believe that upper hose didn't even have a clamp on it, wierd. I would clamp all those new hoses bro, not with cable ties either lol. Get some nice looking clamps on there. Great video, still waiting for my 86 to arrive ...

@MrDice347 Год назад

I probably missed a few vids, but I'm glad to see ya picked yourself up and you're back making vids for the 86/brz platform. Woo!

@CorpseExplosion Год назад

I'll never have cause to do this myself but I still watched the whole vid. Love a well shot how-to.

@KevinVo Год назад

Glad to hear you enjoyed it!

@dmw_99 Год назад

Wouldn't oil or fuel additives clear the carbon build up making this unnecessary?

@KevinVo Год назад

If oil is still getting in there it can still have negative effects to the engine.

@seanmetoyer2016 Год назад

Thank you for posting. I love the content though I don't have an 86 yet!

@KevinVo Год назад

Thank you for watching! Hope you can get one soon!!

@CarsOverPeople Год назад

Any other preventive-maintenance/reliability-improvement mods y’all recommend?

@Ch3mG33k Год назад

I've got an oil pressure sensor + gauge coming from iiR that I think is a nice compromise for dropping the oil pan and scratching around looking for RTV haha. If I ever experience oil starvation I'll know.

@YomieSlice Год назад

Does the AOS bracket touch the hard line on the firewall? Sorry it's hard to see.

@KevinVo Год назад

Nope, just enough clearance!

@willsfrs Год назад

does this work on the 1st gen? ive been wanting to get one for my frs to improve reliability

@Wesley-ui3dw Год назад

How diff compare to oil can catch?

@williamgarland5161 Год назад

Hey Kevin, how’s the airbag light situation coming along? I have aftermarket seats in myself and have yet to figure out the passenger side. Anyway love the vids !

@KevinVo Год назад

Still something I'm working on. Once I come up with a solution I'll be sharing asap!

@CHRoNo-ky6yz Год назад

Keep 'em coming Kev. Good to see you still giving us great content!

@skimboards4life Год назад

This is great content, it's like having chris fix but specific to my car!!

@atpgarageatl Год назад

Finally catching up on your videos! Keep up the great work! Still waiting on the video where you rip off the FT stickers from the FRS lol.

@KevinVo Год назад

The FRS will be getting some much needed love soon enough! haha

@skunkiiee7333 Год назад

finally ive been waiting for an AOS for this gen!

@Ichiashi Год назад

Good thing spring is almost here, so u would need the heater anymore.

@KevinVo Год назад

Spring is a long ways away for me! haha but I'll get through it!

@richdoyon-pi6ms Год назад

Hey Kevin - I installed that AOS over the weekend, with the oil drain back and coolant kits. Fairly straight forward, a bit of a tricky one with the coolant line from the throttle body. Your video was really helpful with the AOS installation, and you same me a TON of headache with the air conditioning compressor removal. Thank you!

@CarsOverPeople 4 месяца назад

How has it been holding up? Does it have any actual effect?

@MosquitoXR13 Год назад

I've been noticing some seepage at the drain back kit on mine. Keep an eye out and make sure those zip ties are tight!

@KevinVo Год назад

Where exactly on the drain back kit? I'll keep an eye on it.

@MosquitoXR13 Год назад

@Kevin Vo, right where the fitting on the bottom screws in. Think I'm going to take it out, check all the connections, and retape them.

@CrazyCat229 Год назад

Love this was wondering about the drain back kit. Thanks again for making some of the best install videos out there. I said it before but you could make training videos for automotive tech vids.

@KuroiMX5 Год назад

Same great content, different location 😉

@KevinVo Год назад

Thanks for your support!

@dudeitsgood Год назад

bro, soon you're gonna have more subs than subispeed lol

@KevinVo Год назад

Who's Subispeed?

@dudeitsgood Год назад

@@KevinVo ❤️

@markmedia3871 Год назад

Let’s go kev!

@nicklauher9323 Год назад

What he said! Great content and I should be getting my 2023 GR86 allocation call any day now (put down the deposit in October)

@nicklauher9323 Год назад

Also, I see the value in terms of preventative mantinance, but what are your thoughts on this voiding warranty?

@KevinVo Год назад

If you're worried about voiding your warranty, my opinion would be just to get the car, drive it, and do aesthetic mods until the warranty is up.

@CompleteUpload Год назад

I was always wondering if anyone else had those lines on their windows when it rains or when it’s cold and your video just answered that question.

@KevinVo Год назад

It's the felt guides that are in the door. No way around it really.

@jerryvolpini7987 Год назад

Looks great and the importance of an AOS is often overlooked! Damn, if that isn't a lot of work, though!. Excellent video, love these! 👍

@KevinVo Год назад

Honestly, if I didn't have to film the process this probably could've been done in an hour or two! Not to bad at all!

@havebadday7850 Год назад

Kevin, please help me, I have a GT86 and the HPFP is making the cricket noise. Do you know if there is an aftermarket HPFP that solves the noise

@BikesCarsAndSake Год назад

That is way fancier than the regular catch cans that we have in our other cars. Nice!

@KevinVo Год назад

It's a really well designed piece!

@CarsOverPeople Год назад

So you wouldn’t need a catch can anymore if you get this?

@JolteeAwn Год назад

Hey Kevin, hope all is well! Quick question, do you think that this would be a worth it investment for a daily driver/ occasional track run? I daily my gr86 and maybe 3 times a year track driven. What do you think?

@KevinVo Год назад

Personally I think so, especially if you get the drain back kit and coolant add on because it's essentially maintenance free and you don't have to do anything to it. It's not that expensive, it's easy to install. For me it was a no brainer.

@Dr_Lord Год назад

Great information. I saw this after the Perrin video and ordered the AOS from there.

@Aeros08 Год назад

I have a question, did you have to trim any part for fit your wheels?

@HANZmoto152 Год назад

More good content as usual!

@FC-fq1gk Год назад

Great vid keep knocking it out of the park

@KevinVo Год назад

Thank you!!

@denstoj Год назад

Well explained, thanks Kev! Keep them coming.

@KevinVo Год назад

Thanks, will do!

@audfo1998 Год назад

Didn't know I needed this now

@daltonlogan7320 Год назад

I just hit ice and totaled my 23’ 86. I Really miss it

@anthonymorandi9005 Год назад

I recommend stapling some insulation up and screwing some drywall in. Will make the worlds difference with warmth of course if you have the extra funds to do so. Loving the new vids bro. I no longer have a Subaru but you were the first face I saw joining the Subaru community and were very helpful. It’s great you’re staying around and will be happy to see you grow👍

@KevinVo Год назад

Appreciate your support! Will be looking into some insulation soon!

@hawkeye2816 23 дня назад

What a crazy amount of effort for this install

@kgthegreatone943 Год назад

Ready for a track day now

@CPE-j1u 6 месяцев назад

Not worth that money - $30 ones will do the same job

@skyhookspirits 4 месяца назад

A lot of work for a questionable benefit.

@Izimas Год назад

Lets gooo!

@patrickhooper2843 Год назад

Great video Kevin. Thanks man. Please excuse my ignorance. I've always used mechanics gloves when working on my cars. So I don't swear as much when wrench slips and I punch the block. (Once was enough lol.) I'm curious as to why you're using latex gloves. I see you're very intentional how you go about things. Why those gloves?

@KevinVo Год назад

I wear mechanics gloves from time to time as well, but because mechanics gloves are on the thicker side you lose some of the finer movements when you have them on. With the latex gloves I can be very precise and get into tight spots.