2022 Low Rider ST - SPC Exhaust Install

Подписаться 2,8 тыс.

Просмотров 7 тыс.

50% 1

Finally was able to install the SPC Big Bore 4.5 exhaust system from SP Concepts! Ran into an audio issue mid install (major apologies), but was able to keep the footage (minus audio), Let me know your thoughts.
@spcexhausts
SP Concepts Big Bore 4.5: spcexhausts.co...
Check it out and share your comments, feedback and questions.
All are welcome!
Just Kill’n Bugz Merch: www.bonfire.co...
Just Kill’n Bugz Stickers and Such: www.redbubble....
Share this video with friends: • 2022 Low Rider ST - SP...
Subscribe to my Channel (or share with friends) to get info and notifications on Current/Future Installs, Travel, and Reviews
* Just Kill'n Bugz: / @justkillnbugz
Items I Use Regularly:
APlusLift MT1500X 48” 1500LB Air - amzn.to/42q5o3Q
Strapinno Retractable Ratchet Straps 1 in x 6 ft - amzn.to/3JXMPNl
Gearwrench Adjustable Mobile Work Table 35-48” - amzn.to/40qUvNx
Video Audio: DJI Wireless Mic System - amzn.to/40fR3pq
Mobile Camera: GoPro Hero 11 Black - amzn.to/42thcCF
Helmet Camera: GoPro Hero 9 Black - amzn.to/3FFjhBl
Overhead Camera: GoPro Hero 8 Black - amzn.to/3LFWNEp
Rotating Camera Shots: Insta360 ONE X2 Action Camera - amzn.to/3lAue0o
Primary Video Camera: Sony ZV-E10 Mirrorless Camera - amzn.to/3JGb5C2
B-Roll Video Camera: Sony ZV-1 Content Creators Camera - amzn.to/3FJlV9i
Neewer 72 inch Tripod Kit - amzn.to/40ag6d9
NEEWER 2 Pack Bi Color 660 LED Video Light and Stand Kit - amzn.to/3JEopqB
60-Piece Master Torx Bit Set - amzn.to/3Z9Jv69
Lexicon Master Hex Bit Set - amzn.to/3nc3XWO
Tekton 3-Piece Swivel Head Racket Set - amzn.to/3JCIUnQ
Tekton 3/8 and 1/4 Inch Torque Wrench Set - amzn.to/3JG9V9E
US Veteran Hat with Embroidered DD-214 Alumni and National Service Ribbon: amzn.to/3zhpbFa
Want to Connect?
* Follow me on Instagram: / justkillnbugz
* Just to put this disclaimer out there, I am not a certified Harley Davidson or Motorcycle Mechanic. I’m just a person who got tired of paying overpriced "what the book says" labor charges for simple things I could do on my own vehicles or projects. Just like most of you searching and watching these videos, I thoroughly enjoy working on projects in my own garage or shop.
* Additional note, all products/parts covered in these videos are not paid or sponsor provided, or unless otherwise indicated up front. I purchase all my own products/parts out of my own pocket just as my viewers would. The thoughts, opinions and comments are all my own based on this experience. Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. There is no additional cost to you!
** Most of all, THANK YOU for your Support! **

Опубликовано:

7 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 86

@MotoBlonde Год назад

Awesome to see another SPC! Super happy with ours!!

@rlafferty76 4 месяца назад

Nice video. Love your detail in your videos. I recognize the area, my family lives in the same neighborhood. Might have to stop by with my st and say hi 🤙

@justkillnbugz 4 месяца назад

Much appreciated, Thank you!

@andrewvickers4487 Год назад

Nicely done! Sound good and looks very sharp, I love the look of metal against black paint. Great job, you made it look relatively easy!

@justkillnbugz Год назад

Thank you sir, much appreciated. It is pretty easy to do, just have to have some patience and take your time in some areas. I am glad my video helps to see it can be done. Ride safe

@andrewvickers4487 Год назад

@@justkillnbugz It absolutely does. Yes I think patience is the virtue I'd want here :)

@nathanieltherrien9204 Год назад

Nice upgrade brother! Ride safe. Thanks for sharing 👍🏻

@justkillnbugz Год назад

Thanks, much appreciated! You as well

@btoso32 Год назад

I just bought the big bore. I'm pumped to get it on!!

@justkillnbugz Год назад

Awesome! You will love it! SPC has a great product and if you watch some of my other low rider videos, such as testing the S&S, you can hear how awesome it sounds. Plus, they are great people. Enjoy and ride safe!

@btoso32 Год назад

@@justkillnbugz I also have the s & s stinger. We have good taste!

@justkillnbugz Год назад

@@btoso32 100% agreed 👍

@crisvaldez1447 Год назад

I just got mine yesterday. I learned about this exhaust watching Moto Blonde and decided to pull the trigger after watching your channel. I love it but did you notice there’s a spot that it’s a little bit too close to the motor? It might just be me but I’d love to hear your thoughts.

@justkillnbugz Год назад

Thanks Cris, I appreciate the comments. My first video on SPC I mention motoblonde as well since my conversations with her turned me on to them as well. I am glad you got them, they are great people and have a great product. I did notice the same thing, and have been watching it, but have not had any issues yet. I do know that if I do, I can reach back out to SPC and they will do their best to help with any problems. Enjoy the pipes and ride safe.

@crisvaldez1447 Год назад

@@justkillnbugz Glad to know I’m not the only one to notice that issue. You think I should let Greg know about it too? I really value your input that’s why I ask. I’m really enjoying mine and I’m glad I waited. I’ve had my bike for almost 2 years already and I almost pulled the trigger on the TBR. By the way, have you put in a tuner already. Thanks again for the videos!

@justkillnbugz Год назад

@@crisvaldez1447 Thank you, I appreciate that. I think that if you have a question by all means reach out and let them know. They may know about it or have a solution or provide some additional support. Let us know what happens in either case. I love the exhaust as well and have not had any issues with it so far.

@FXFBS23 Год назад

Robert, thanks for making this SPC vid. Sounds great with stock engine! I’m considering it for my stock ‘23 Fat Bob. Not sure if I should do a screamin eagle stage 2 while I am at the dealer along with the SPC. Still under warranty so I was opting for the SE stage 2 and then, if desired, switch cams when warranty ends. I’m concerned it will be TOO loud with stage 2

@justkillnbugz Год назад

Thanks for the feedback! I am glad you found it useful. As to the sound, these are great because they are mellow when low rpm, louder than stock of course, but sound amazing when you hit the mid band. As for the stages, not sure where your located, but here in CA if I put a tuner on the bike it voids my warranty. Check with your local dealer to see where the limits are and what would be covered and not. Obviously cam and exhaust would not be if changed but good to know where you stand with the mods you are considering. Thanks again and ride safe.

@jjpro20021 Месяц назад

@@justkillnbugzI’m about to put this exact exhaust on my low rider st do I need to put a tuner on it ? I’m asking because I don’t want to void my warranty aswell. Will it mess up my bike if I leave it without a tune?

@justkillnbugz Месяц назад

I did the same with no tune and have had no issues in my 2022. Enjoy and ride safe.

@FXFBS23 Месяц назад

Update: I love my SPC. I ended up adding g these along with a SE stage 2 torque cam and SE tune. You can def feel this (conservative) SE torque improvement. The HD dealer did all work and I did not void my warranty. This coming winter I plan to go to a more powerful cam, upgrade the oil pump, manifold, etc and get a diff tune. But at this point in my ownership I don’t mind voiding

@jjpro20021 Месяц назад

@@FXFBS23 are you in California? Because I am putting on the same pipe and I don’t want to avoid my warranty either so if I take it into the dealer with that pipe already on it, they won’t say anything?

@88jjdecay Год назад

Doing the install right now for the same exhaust. My header bolts are 13mm….

@justkillnbugz Год назад

Awesome! Glad you got them and are getting them on. Nothing like consistency on bolt sizes for made in USA (mm) products right? Lol. Your gonna love the sound!

@jasonkimble8926 Год назад

Looks, and sounds good

@justkillnbugz Год назад

Thanks Jason, much appreciated.

@SonOfRich56 8 месяцев назад

Great video and the pipe looks great as well. Would you say it’s a neighbor friendly exhaust? I like a good sounding exhaust, but don’t want to be THAT guy.

@justkillnbugz 8 месяцев назад

Thanks for the comments and the question, much appreciated. I would say it is neighbor friendly, none of mine have complained and it sounds nice and deep on start up. Many actually like the sound and have complimented me on it. The real tone comes in when you get on it as the video shows. I also did a new video on my 2023 RG CVO with the new long pipe version from SPC and you can see the sounds there as well. Same tone and deepness, but not obnoxious for either 🙂. Hope that helps and ride safe.

@SonOfRich56 8 месяцев назад

@@justkillnbugz thank you! Also have you noticed a difference in HP or torque?

@justkillnbugz 8 месяцев назад

@@SonOfRich56 You bet, glad to help. As for the HP and Torque, it still has a stock map and no tune. Can't put one on yet in CA, but it does feel a bit more snappy, but I don't have numbers from stock to compare. Besides, great sound ALWAYS makes it run better...LOL

@kristopheryates7595 Год назад

Great videos. Good detail describing exactly what you’re doing to cut our work time down. Thank you. I’m installing my SPC big bore pipe now. Having a little trouble figuring out the bag bracket. How did you mount your spc bag bracket (not the pipe bracket) and what bolt did you use?

@justkillnbugz Год назад

Thank you. Much appreciated. I used the same bold from the lowest back frame that attaches the swing arm and mounted loosely. Then I put the bag on and positioned it, then tightened it. Then took the bag back off and continued. Hope that helps, you will love it.

@kristopheryates7595 Год назад

Appreciate it. That’s what I thought but bolt was struggling going in.

@justkillnbugz Год назад

@@kristopheryates7595 Struggled coming out too ;-)

@justkillnbugz Год назад

@@kristopheryates7595 Just rewatched the video, you can see that part at 21:04 of the shot 🙂

@joemayner5645 4 месяца назад

I noticed you didn’t change your exhaust gaskets, is there a reason for that?

@justkillnbugz 4 месяца назад

Thanks for the question. Yes, the SPC pipes did not require a gasket. Ride safe.

@sebastianaguirre486 10 месяцев назад

i like the sound but i want to change mine for a dual pipe, look similar to oiriginals but change sound,, any advice on brand and model??

@justkillnbugz 10 месяцев назад

Thanks for the comments. I have seen many with Vance&Hines and Screaming Eagle. You will have to troll the dealerships and find some to listen to and scope out to see if you like them. Best of luck and ride safe.

@robertvillarreal7590 8 месяцев назад

What kind of mirrors are those. Nice pipes👍🏼💯

@justkillnbugz 8 месяцев назад

Thank you, they are the HD Custom Profile Mirrors on the HD parts site.

@projectcarl2706 Год назад

I bought the same pipes for my low ST, just not installed yet.

@justkillnbugz Год назад

Thanks for the comments, glad to hear it. Really happy with the product, hope you get them on soon. Ride Safe.

@bcbsilverhawk8426 Год назад

Nice video. Pipes look OK. Would prefer them to go farther back. A bit too short. Take care.

@justkillnbugz Год назад

@@bcbsilverhawk8426 thank you, appreciate the feedback. I have seen a few different 2 to 1 designs like this version that do go a little further back like the Bassani pipes. These run great and sound awesome and I am seeing more and more bikes with them. Vance & Hines and a few others do have a straight pipe solution that can go all the way back as well. I just think this design is supposed to be a shorter length which is where the personal preference part comes in for the look people are trying to achieve. Thanks again for the awesome feedback and comments, ride safe.

@California__Kid__ Год назад

🤘💥🤘

@nolliekwakie712 5 месяцев назад

do you need to do the mapping?

@justkillnbugz 5 месяцев назад

Thanks for the question. See previous comments for the tune answer in detail, but no, I have not needed to add a tune so far. Ride safe.

@nolliekwakie712 5 месяцев назад

@@justkillnbugz thank you

@bradnugent58 Год назад

No new gaskets?

@justkillnbugz Год назад

Nope.

@JakobKaizen 11 месяцев назад

How loud would you say that the big bore is compared to let’s say stealth pipes turnout, hpi short and tbr turnout?

@justkillnbugz 11 месяцев назад

Thanks for the question. I don't have experience with those pipes, but I can tell you that compared to my Rineharts they sound just as good but a lil bit louder. The Big bore Pipe sounds awesome. It had a crisp deep sound at low RPM and unleashes at higher revs. Checkout some of my other LRST videos and you can hear it while riding. Not much help I know but I can only speak to what I have used.

@user-lg3jx3my3c Год назад

Question which way is your bag bracket installed it seems my bag really struggles latching any help or pictures of which way you installed yours would be much appreciated

@justkillnbugz Год назад

Sure. Shoot me a message on my instagram account with a pic of what you need shown and I should be able to help out. In short though, I put the bolt for the bracket in the lowest aft hole, kept it loose, mounted the bag then tightened it where it fit. Hope that helps.

@ryansweet9104 Год назад

I thought the exact same thing when I installed mine. The bag seems to fit 'tight' and struggles going on. I may flip the bag bracket and see if that helps.

@justkillnbugz Год назад

@@ryansweet9104 Thanks for the comment. It could be that, check my video on which way the bracket is facing, may help. Also, when I did mine, I put it on loosely, mounted the bag, then tightened it once the bag was on to help align it a bit better. Hope that helps and ride safe!

@illfaptothis333 Год назад

have you considered doing a turn signal delete?

@justkillnbugz Год назад

Thanks for the question, much appreciated. I have thought about it, but at this point still looking around. If you know any solid solutions let me know and I may do a video on one if it fits my build plans. Ride safe!

@depererat35 Год назад

What are the torque specs did you use new gaskets

@justkillnbugz Год назад

Thanks for the question. Torque values were not indicated by the manufacturer. I used loctite and tightened them until they were securely in place. Ride safe.

@jasonharrold6686 Год назад

How do the hp/ torque numbers compare to Bassani/ thrassin or HPInc

@justkillnbugz Год назад

Great question, thanks. I do not know as I have not had it dyno'd yet. It has been in the shop as other videos discussed for a lovely oil leak issue, but once I have them I will post the numbers. You can check on the SPC site, they may have some additional details on specs there. Ride safe

@jasonharrold6686 Год назад

@@justkillnbugz would yoy recommend them despite the oil leak?

@justkillnbugz Год назад

@@jasonharrold6686 If you mean SPC pipes? Absolutely, the pipes had nothing tondi with the leak. It was a Harley thing that a few others have commented on in my video comments for the leak. If you mean the low rider? Yes, it’s a great bike and a lot of fun for mid control lovers, of which I am not, but that was easily fixed as well. Lol. Ride safe and thanks for the support.

@Bigiron429 Год назад

HPI is an overpriced pipe that has around the same numbers as a Tbr/DND Pipes l. Sawicki speed and thrashing by are probably the best comparing the cost to a HPI pipe

@G.crickon Год назад

Did the bike require a tune or flash after the pipe was installed?

@justkillnbugz Год назад

Thanks for the question. It is recommended that you have the bike dyno tested and tuned for any new full exhaust system (not slip-ons) to ensure peak performance and operation. Due to the oil filter issues I have been experiencing (posted in other videos) I have not had a chance to do a dyno test yet. In CA, the EPA has not approved tuners to be installed on certain 2021/22 models yet due to updated emission controls. Also in CA, if you add a non approved tuner to the bike, it will void and block your warranty for any issues that could be related to service in those areas. For me, the bike seems to run great with no popping or backfire noises (once in a great while depending on aggressiveness) as is. So I will wait until we have a warranty approved solution for my state, or when my warranty expires. Best to check with your local dealer to see what the rules and guidelines are where you live. Thanks again and ride safe

@daviddelatorre9989 4 месяца назад

@@justkillnbugz I just bought this pipe and i live here in CA. What did you end up doing to tune? ECU? Intake?

@justkillnbugz 4 месяца назад

@@daviddelatorre9989 Thanks for the question, I did not have any tune on the bike and run it with the stock map. Runs fine with no issues for me. Ride safe and enjoy!

@williamharrison717 Год назад

What kind of seat is that?

@justkillnbugz Год назад

Thanks for the question. It’s a saddlemen step up seat. I also did a video on that as well. Love it. Ride safe.

@williamharrison717 Год назад

Did you put a tuner in it

@justkillnbugz Год назад

Thanks for the question. As mentioned in the video I did not. Very minimal pops and am waiting for it to pass the warranty period. A tuner with void warranty in CA. However, don’t have the bike right now cause of the oil issue described in my more recent videos. Hopefully soon though. Ride safe.

@jjpro20021 Месяц назад

@@justkillnbugzI guess my question is , is it safe to have this exact exhaust and running the bike normally not being harsh with it … for the 2 years without any tuner on it . I want to put this pipe on and run it without a tuner until my warranty too. I’m in California aswell . Sorry for bugging you

@justkillnbugz Месяц назад

@@jjpro20021 I have had no issues.