2023+ CVO Amp/Speaker upgrade installation review 

Already working on the templates for the bag lids but it’s gonna be at least eight weeks

I'm curious about this too. Also as it's on the heat sink for the unit does this cause issues for either unit?

Simple Velcro holds the amp in place. It’s so tight up there nothing can move. SPL baggers offers a bracket to both the amp in place but you have to cut the headlight to make it work. I didn’t wanna cut the headlight.

There is a 4 pin connection for the rear speakers and from the amp there is a 4 pin plug that sends signal to the rear speakers. just plug it in Same as the front.

Great to know just the same as the previous model that had the same outputs. I didn't know if they had done away with the one in the fairing and just had the one under the seat. Thanks again. @@AZBaggers

I have never noticed what you're describing. It works flawlessly

@@AZBaggers thanks.. something mentioned by guy at Volunteer Audio.

I believe the digital signal needs to be converted and the DSP does that. The new system is an a-b processor like all the newer cars and requires a converter. AP-ZEn makes them for ford. Thats my understanding. But I am not an expert.

You would.also want the ability to adjust and correct for the factory Rockford system. A DSP is def a no brainer on all my bike installs. Carlos is a mentor and trained me on bike audio. Do you absolutely need one? Maybe not. But you do😉

They are ODI Podium bars and I didnt do an install (full) but I did do a video of the wiring and differences. its on my page

Thank a lot brother last question the pullback risers come in 8 inch or no 🙏🙏

SO Kraus does make 8" risers. However, I found that the 10" are perfect and you can adjust the bars back and forth for reach. 8 inch will only extend past the housing about 5" There is a factory 3 inch riser under there. So dont just measure from the cover measure from the triple tree. @@g929rr

Thank you very much for this information….

​@@AZBaggersThanks for the answers on the riser setup. On my RG24 I have used an 8 inch and odi V-Twin handlebars-with my setup I didn't need to enlarge the holes. Indeed with a 10 inch Riser there would still be full visibility of the display. Many thanks again!

I did put the hertz 6.5" neo in the tour pak

@@AZBaggers Looked like the coax neo.

@@marcmo7138 I guess I didn’t understand the differences. They are SX 165 Neo’s. Would the other ones be different

@@AZBaggers The SV165 is a mid bass. Would have been perfect in those ported pods. I would think your system would be quite bright with the cicada horns and Hertz coaxial. Supposed the dsp helps a bit though.

@@marcmo7138 The SX 165 and the SV 165 Neos both produce the same exact amount of midbass in the tour pack. We offer both and have both in stock but I like having a tweeter in the back and yes you’re correct with the DSP we can smooth out the tweeter response . You have to remember it’s the port in the tour pack that create the base not the speaker itself so whether the speaker has a tweeter or not the porch and give you the same low, frequency output

Man this comment is not gonna age well 😂

So how are people putting subs in their cars with factory amplified radio’s? Ive done multiple Infiniti’s with Bose amps feeding the bass amps and I have NEVER blown out a factory head unit or amp…

😂😂😂. Literally every newer vehicle you go from amp to DSP nowadays😅😅

Every 12v audiophile. 🤦🏽‍♂️

You do know he tested this for weeks to test everything right and you do know you are wrong as well right? Every audiophile knows this. 😅