Tastefully done man! Love the theme of "OEM+" as it completely shows through. I would set mine up the same way if I had the good fortune of also dailying a FL5 CTR. Thanks for the share!
Beautiful Set up! Curious because is is the exact stance I want run on my FL5. Can you shed some light on the daily driving life with this stance and fitment? Does it rub fenders at all? Does the front end clear most driveways? Ride quality on daily commutes? Any feedback is great, just got mine a few weeks ago win Champ white and so far this is the best car purchase to date!
No rubbing, with no front lip the clearance is fine. Be careful on significant inclines and try to angle in/out as necessary. Ride quality is good but everyone has their own opinion on the stiffness preference.
Cool video. Can you share please if you experience more understeer after 20mm spacers fitment? I am unsure if I simply feel it more after I instaled it on mine or are spacers actually causing it. Thanks!
What's the name of the bulb for the hatch did you get? I want to change mine out in my hatch. Do you plan to get tints? I got mine done, it protects the seat's leather/fabric and steering wheel/dashboard from damage made by the rays and heat of the sun. I love that Red body. I think its the perfect color for this car, matches the interior like no other body color.
Congratulations, Beautiful car! 🤩 the spings is h&r ? The spacer is 20mm ? Can you tell me if the spacers do not touch anywhere? Thank you for the answer. Best regards Filipe , FL5 boost blue
- Swift springs (FK8 spec) - H&R 20mm spacers all around - Smaller exhaust resonator deleted - TheTopher exhaust valve mod - OEM alcantara steering wheel - OEM JDM fl5 type r shift boot - OEM type r high wall carpeted floor mats - OEM type r trunk tray - OEM seat back protectors - LASFIT LED turn signal and reverse light LED bulbs - Auxito LED cargo light bulb
@@SnoopiFL5 no rubbing at all. Keep in mind I'm also on 20mm h&r spacers. If anything, you can run it with no spacers. spoon springs sits way higher in the front than the rear, which is why I did swift instead.
@@tricomaguitarist as long as it huncentric, your wheels can accommodate the studs that stick out and they are torqued down properly its perfectly fine.
No. The spacers have integrated studs on them. The factory studs will have a slight poke through the spacers but the factory wheels are designed to tuck them in with no issues.
I don't run a front plate. But I think there's a few options you can take a look at if you don't want to drill the front bumper: 1) use the factory plate mount and flip it upside down, use zip ties to secure it to lower grill then screw plates into plate mount. 2) retrofit some sort of hideaway plate under the bumper 3) ziptie directly into front lower grill
@shadtography just gave my 19 year old a fully fixed up 9th gen accord.. after 1 week he asked me if he can tint it. Had to sit him down and explain.. do u want to be like 99.9% of cars out there? We spent over 15k aftermarket and you don't want to be seen? Look at the lowriders.. show me 1 lowrider that has tint. They know how to show the streets wassup
