No video :(

2024 CVOST Sissy bar NO MAJOR MODIFICATIONS.See below instructions

Подписаться 494

Просмотров 9 тыс.

50% 1

Here are the instructions
Remove the 2 torx bolts holding the shock resivors.
Pull out the bracket
Install docking hardware plate
Install 2 3/4" spacers where you took out the torx bolts
Use 2 1 3/4"" length bolts
I used Allen heads black
Install washer on each bolt small washer
Rear part on mount will have a counter sunk face
don't worry ..
Front will have finished flush face
Use small washer
Put resivor mount on strut and against the spacers
Install bolts and tighten
You will need 4 bolts and 4 spacers 4 washers
4 Allen head bolts 1 3/4" length 5/16 pitch 18
4 3/4" 5/16 hole spacers
4 washers slightly larger then Allen head
All done

Опубликовано:

27 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 22

@EdwardNagel 5 месяцев назад

I really appreciate the video. I just applied what I learned to my bike with one exception... I couldn't locate the 5/16"-18*1-3/4" bolts locally. So I went with 5/16"-18*2" bolts and found that I was able to go the extra length without protruding through to the fender. So like you, and for the cost of 4-spacers, 4-bolts and the washers that I already had in my little bins, I was able to install the 4-point docking station and aim the mini rocket launchers more appropriately towards the car behind me.

@icehog2367 19 дней назад

You need (4) spacers that are 5/8" OD x 5/16" ID X 3/4" long and (4) 5/16" X 18 x 2" bolts. The kit Harley sells comes with a bracket, but it's the same bracket that's already on the bike, nothing different. Just buy spacers and bolts and save yourself $75.00

@jessel.8697 Месяц назад

Now Harley has new brackets that you can buy.

@icehog2367 19 дней назад

The Harley kit uses spacers just like the OP says and the brackets they send are the exact same as what's already on the bike. Waste of $$$ to buy the kit.

@christophermoon1291 Месяц назад

Thanks a million

@eddigee1697 4 месяца назад

Thank you for this💯

@raymondgarcia5448 5 месяцев назад

Can you please make another video with the bags off so we can see exactly how you did that

@sean0387 6 месяцев назад

🔥🔥🔥🔥

@I2Zulu 6 месяцев назад

Right on! Where are you going to post the pics of what you bolts and spacers you used to make it happen?

@KOGAMEOVER1 6 месяцев назад

I added pics on the CVOST forums on facebook

@KOGAMEOVER1 6 месяцев назад

Added instructions on Video

@dlawsonlawson1582 3 месяца назад

How does your wife like the seat? Looking for a two up for my 24 that has both looks and comfort.

@andreworth6701 Месяц назад

what kind of seat is that?

@dnice4431 6 месяцев назад

Now for people like me who are mechanically dumb and are unsure of exactly what you did. Any chance of a step by step. I can follow directions but not a figure it out kinda guy.

@KOGAMEOVER1 6 месяцев назад

Undo the 4 torx bolts that hold the shock resivors. Pull out the mounts Put in place the docking hardware Install the 3/4" spacers where the torxs bolts came out. Put the shock resivor mount on top of those spacers outside the fender strut. Install 1 washer and 1 1/2" Allen head bolt each side yes the rear will have a counter sunk area Install small washer on both locations and tighten.. All done

@dnice4431 6 месяцев назад

@@KOGAMEOVER1 you sir are the man thank you.