#207

Подписаться 17 тыс.

Просмотров 14 тыс.

50% 1

In this video I do the 400 hour service on my Kubota L3901 Standard L Series tractor. This service includes engine oil/filter change, hydraulic filter change, transmission filter change, fuel filter change, air filter change, fuel/water separator cleaning, and bleeding the fuel system.
NORTHEAST ARBOR EXPO: arborexpo.org/
#cormidi #kubotausa #stihl #suretractrailers #woodmaxx #ruggedmade #bigtoolrack
Check out the official Dude Ranch DIY Merchandise!!
dude-ranch-diy.creator-spring...
CORMIDI USA: cormidiusa.com/wp/
KUBOTA USA: www.kubotausa.com/
WESCO INC: www.wesco-inc.com/wp/
RUGGEDMADE LOG SPLITTERS: ruggedmade.com
BIG TOOL RACK: www.bigtoolrack.com/
Promo Code: DUDERANCH5
Product Links:
5 ELEVEN DESIGNZ BRUSHGUARD: www.5elevendesignz.com/
LED SOLAR SPOTLIGHTS: amzn.to/3qxYGH6
HEAVY DUTY CASTER WHEELS: amzn.to/3GLmAVX
VODA HEAT POWERED STOVE FAN: amzn.to/314l9lP
GALAFIRE MAGNETIC THERMOMETER: amzn.to/3Emykgn
RUTLAND LIQUID STOVE POLISH: amzn.to/3GsJxOn
ACCUSHARP KNIFE & TOOL SHARPENER: amzn.to/3BVLNdQ
LARGE EQUIPMENT FUNNEL: amzn.to/2NuMFlT
4’X20’ HEAVY DUTY IBC TOTE FIREWOOD TARP: amzn.to/3tVIUql
FISKARS 8LB SPLITTING MAUL: amzn.to/3ptDMqx
ACC-U-MARK FIREWOOD MEASURING STICK: acc-u-mark.com/collections/fr...
ACCU-STICK PRO FIREWOOD MEASURING STICK: www.baileysonline.com/ott-acc...
STIHL 2 IN 1 EASY CHAINSAW SHARPENER: amzn.to/3oJJFj2
SNO-SEAL WATERPROOFING: amzn.to/3pu51RL
KINCO 1938 GLOVES: amzn.to/34IOGAK
GENERAL MOISTURE METER: amzn.to/3mGaWBb
FISKARS HOOKAROON: amzn.to/2WBtrMy
MINGO MARKER FIREWOOD MEASURING TOOL: amzn.to/3mVGymC
3M WORKTUNES: amzn.to/3se8zJL
Check us out on Instagram and Facebook! @duderanchdiy
Email us Questions! duderanchdiy1@gmail.com
Featured Equipment at the Dude Ranch:
- Kubota L3901
- Cormidi C-1500 Mini Loader
- Erskine Industrial Grapple
- Big Tool Rack Tractor Carry All
- Everything Attachments 55” Wicked Root Rake Grapple
- WoodMaxx MX-8800 Chipper
- Land Pride RCR-1260 Rotary Cutter
- RuggedMade RS-737 Log Splitter with Auto Cycle and Hydraulic Wedge Lift
- Stihl MS 192 T
- Stihl MS 200 T
- Stihl MS 201 T
- Stihl MS 290 Farm Boss
- Stihl MS 362
- Husqvarna 455 Rancher
- Husqvarna 580 BFS Backpack Blower
- Milwaukee Hatchet Handheld Chainsaw
- Mingo Marker Firewood Measuring Tool
- Accu-Mark Magnetic Firewood Marking Stick
- Polaris Sportsman 500 H.O.
- International 4700LP Hook Lift Truck
- Kubota ZG227 Zero Turn Mower
- Sure-Trac 7'x14' Low Profile HD Dump Trailer w/ Custom Built Log Arch & Winch
Protective Eyewear of Choice:
- Pit Viper Double Wide “Leonardo”

Кино

Опубликовано:

29 мар 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 50

@somedayzo6 2 года назад

Jake I always enjoy the voice over explanations of what you are doing! Please keep going with this format! Nice job on the service action!

@DudeRanchDIY 2 года назад

Thanks for the feedback!! I’ll keep it in mind for future videos!

@critcherh 11 месяцев назад

The stuck 5 gallon bucket trick was priceless. Good job on the whole video.

@gadsdenconsulting7126 2 месяца назад

Thanks, amigo.

@HometownAcres 2 года назад

Cool trick on the shop vac. Wish I would have known about that 2 days ago haha

@DudeRanchDIY 2 года назад

Yeah it worked surprisingly well. Thanks for watching Adam.

@jg-365 Год назад

Great video, thank you!

@EverythingElliott 2 года назад

Nice job with the shop vac. That’s an old mechanics trick for replacing the drain plug washer without changing the oil.

@DudeRanchDIY 2 года назад

Thanks Elliot, I hadn’t heard of it before for that use. I’m sure it works well.

@stevenreeves4766 10 месяцев назад

now that the L3902 is out with rubber floor mats they will fit the 3901 as well.

@mikepoupore7173 Год назад

nice video, the L3902 mat fits the 3901 fyi.

@twinstickpete 3 месяца назад

Great vid....thx

@DudeRanchDIY 3 месяца назад

Glad you enjoyed it

@howard5567 2 года назад

Jake: Being 66 yo, most of all that goes to Carl's community. I'm looking forward to March, an harvesting some of the Northern Red Oak saplings. We planted 20 odd years ago. Well for now, thumbs-up catch you on the next one.

@DudeRanchDIY 2 года назад

Someone’s gotta do it! Very cool how big are they now?

@howard5567 2 года назад

@@DudeRanchDIYJake::04.04.22., They started off at 18 to 21 in. sapling. At around 8' to 10' tall, we start removing the lower limbs that triggers a growing spurt. So now using this bit of knowledge, we're looking at. Approximate 18 to 20 ft. logs. So quite simple, its like growing rows Red Oaks like rows corn for 20 years. Just got back from Charleston S.C., my old's son Nick's 37 birthday. and jot to meet more of the in-laws that didn't make the wedding. My two fingers are getting a little, so I'll catch you on the next one .

@Ramdodge582 Год назад

just hit 400, need to order parts and do this

@Cobrabitn Год назад

This was an excellent video and I'll be saving it. My only criticism is to include part numbers for each item you replaced, otherwise, excellent job!!

@DudeRanchDIY Год назад

Thanks, I’ll try to get part numbers next time

@whiz3528 11 месяцев назад

I made floor mats from a rubber stall mat from Tractor Supply. Kubota sells mats now for about $150.00. Stall mat is about $30. I understand there is a rubber air vent under the seat that if plugged with a round object just a little bigger than the hole you will lose very little hydraulic fluid.

@DudeRanchDIY 11 месяцев назад

I’d like to get or make some my pain is all scratched up on the floor boards

@sugarbear7315 11 месяцев назад

As a thought..put heavy srean like material over hole of drain pan

@GabrielJohnstone42 Год назад

Cleaver shop vac tip. Thanks

@DudeRanchDIY Год назад

You bet

@GodGunsGears Год назад

At 400 hrs. aren't you supposed to drain/change the trans fluid as well?

@DudeRanchDIY Год назад

Trans & hydro fluid are one in the same on the tractors. I flushed and changed it at 200 hours due to the amount I lost the first time when changing my hydro filter. After talking to my dealer they said the next time I would need to change is around 800-1000 hours depending on use.

@GodGunsGears Год назад

@@DudeRanchDIY Gotcha...thanks! Just getting ready for my 400 mile maintenance and was going through my parts list before getting started. You video was very helpful...thanks my friend! We love our L3901 and RTV900!

@eastkyboy5619 2 года назад

Good video. I got some very nice mats for my L3901 from ITC quick attach they don’t cover the hump but I’m thinking of taking it off a spraying it with bed liner. Also I like your grill guard is it a 511?

@DudeRanchDIY 2 года назад

Thanks I’ll have to check those mats out…yeah I’ve thought about bed lining that panel as well though I’d prefer something not as permanent. Yep the grille guard is from 511, I love it. Very high quality.

@hhazelhoff1363 Год назад

Always helps to pressure was or give the tractor a good bath before doing the service to keep everything clean. And why not just change the hydraulic fluid while your at it

@DudeRanchDIY Год назад

Yep working on clean equipment makes it easier

@markcole6475 6 месяцев назад

So do you run 10/30 all year round?

@DudeRanchDIY 6 месяцев назад

Yes

@stevenreeves4766 10 месяцев назад

I am confused, my maintenance check list says change the transmission fluid at 400 hrs. and the transmission and hydraulic fluid are one and the same.

@DudeRanchDIY 10 месяцев назад

Yeah when I did an earlier service I accidentally lost a bunch of hydraulic fluid and ended up just changing it all right then and there.

@blessingslawn 2 года назад

My 2650 is change hydraulic oil at 400 hrs

@DudeRanchDIY 2 года назад

I did my hydraulic oil at 200 hours, after talking to my dealer they recommend fully draining and changing the hydraulic oil next around 1,000 hours.

@blessingslawn 2 года назад

@@DudeRanchDIY Interesting! I figured the dealers would follow Kubotas recommendations. She’s ready to go for the summer now.

@timothyleinenbach3360 Год назад

Show same procedure for l4701 tractor

@DudeRanchDIY Год назад

I don’t have a 4701

@codyrussow170 2 года назад

That's a 4x4 ? You haven't had to change front bearings yet ?

@DudeRanchDIY 2 года назад

Front bearings? I hope I’ll never have to change those. Changing the front axle case oil will happen at 800 hours. Beyond that the front end is pretty much maintenance free beyond greasing.

@codyrussow170 2 года назад

@@DudeRanchDIY little tip for ya ,if that tractor has hydraulic fluid in the front axle "which is what they came out with" regular gear oil is recommended "per kubota" yes bearings are an issue because of this

@Ramdodge582 Год назад

what's with the shop vac? you are supposed to change oil the hydraulic oil at every 400 hours. drain that shit at all locations.

@DudeRanchDIY Год назад

I had messed up at a previous service interval and drained all that hydraulic oil already around 300 hours so I didn’t change it here.

@stevenreeves4766 10 месяцев назад

so if you had already replaced the oil why replace the filters if you had already done that?@@DudeRanchDIY

@DudeRanchDIY 10 месяцев назад

Because the filters require changing at more frequent intervals than the entire hydraulic fluid system

@stevenreeves4766 10 месяцев назад

This is not true, according to the service manual change filters and fluid at 50 hrs, then every 400 after that. if you changed them at 200 and then not again until 800 is out of spec. changing fluid and filters early never hurts though but the filters should be changed at the same time as the fluid.@@DudeRanchDIY