No video :(

22LR CZ 457 PRECISION ELR / PRS BUILD FROM MILD TO WILD (PART 4: XLR ELEMENT 4.0)

Подписаться 39 тыс.

Просмотров 23 тыс.

50% 1

Part 4 of our mild to wild CZ 457 series. This time we test out the element 4.0 chassis to see if it has any impact on our accuracy.
Next video will be the start of our barrel testing with the IBI 12 twist barrel.
Remember to vote for us!!!
www.thegundies...
Consider visiting our website to for the Patreon and Paypal links to help support the channel.
www.pursuitofaccuracy.com
The Links below are Amazon Affiliate links. I do get a small kickback off of your purchases through amazon if you use these links. The items don't have to be the items on this list but actually any items you may by once you follow amazon via the link. This helps support the channel and future content without biasing ourselves through affiliate links for companies we review etc.
Main Camera (Sony a6400) : www.amazon.com...
Gopro hero 9: www.amazon.com...
Hollyland Lark wireless mic: www.amazon.com...
Spuhr 4026 mount: www.amazon.com...
Tripod: www.amazon.com...
Super affordable 1" target pasters: www.amazon.com...
DJI Air2 drone: www.amazon.com...
DJI Mini 2 drone: www.amazon.com...
Gun cleaning vise: www.amazon.com...

Опубликовано:

27 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 41

@Christian-mt8fv 2 месяца назад

Really enjoying the videos as I get into 22 PRS - but where are the rest of this series, I can only find 1-4, where are the ones with new MDT stock and barrel testing?

@PmBoyle 2 года назад

I'm loving this series!

@davidmcneil1550 2 года назад

Thanks. Hope all is going well at school.

@jamesquigley8628 2 года назад

Would love to try the 457. Be Well.

@terrykleypas50 2 года назад

Thanks for the video, Josh. Hope all is going well for you at school. Still haven't found out about Gundies....

@Dwayne7834 2 года назад

Thanks for the series. Good shooting.

@Jeff-mv4yy 2 года назад

Thanks Josh ! I didnt get an accuracy improvement from my MDT chassis, but as you said, I find it much easier to shoot consistently . Can't wait to see what the IBI does. That little factory barrel shoots pretty darned good. The Eley Match will likely be a better match for the Lilja. My CZ 16" barrel loves SK Rifle Match over Eley. I believe IBI barrels are made to perform best with Sk ammo. But it would be really tough to do exhaustive ammo testing with each barrel. But without doing so, I think the deck is slightly stacked to the Lilja.

@aussiesteveakastevecallagh2280 2 года назад

Hey Josh Hope your enjoying your time away at school, Steve .

@msi1985 2 года назад

Awesome series 👏 👌

@tykeshooting84 2 года назад

Great video, yet again 👍

@Long-gray-line 2 года назад

Very cool series. Lovin' this:)

@tmurray1972 2 года назад

interesting series. Those short barrels can group as well.

@Burneygames 2 года назад

Watching you had inspired me to get into precision rimfire. Just picked up a bergara bmr to give it a try. Looking for suggestions on the bags you use for resting the stock on. I imagine they all do the same thing but wasn't sure if one would be better than another. Appreciate all of the info you put into all of your videos. Going to do an ammo test on my bergara and see what it likes. Keep it up!

@dougdishler2086 2 года назад

Nice i was wondering what the 16 inch barrel looked like in that chassis looks awesome !!! Hope everything is well at school

@mxj2311 2 года назад

Great series, very curious to see how the 1/12t doe

@srkmarine1 Год назад

Were you ever able to do a test with this rifle and the Lilja Barrel? Not able to find a follow-up video on that for some reason. Your channel is great!

@PursuitofAccuracy Год назад

Hey ive been gone training for a while but will be getting back on this.. We will be testing a bartlein barrel then the lilja.

@bradenmiller3476 2 года назад

Hey Josh love the videos. Just got into the precision rimfire stuff telling myself it would be cheaper than shooting my center fire stuff all the time… LOL. Anyways I bought a ruger LRT and hate it. I didn’t know what I was buying at the time and going to swap it out for a CZ457. If I’m going to swap the barrels out on it, is there any reason to buy the 457 precision trainer MTR over the regular precision trainer? There’s about a 400 dollar price difference but if I’m swapping the barrels out I don’t see the need to spend the extra cash.

@CobosDoesItAll 2 года назад

Any chance you could do some videos with a savage mark ii fv-sr?

@biagiocozza8875 2 года назад

Great series Josh. Which chassis do you like best so far. Which version are you taking to a match?

@jamesheath9385 2 года назад

Wow. You found your lost razor.

@SundayNews27 2 года назад

When you put your Victor Company check rest on the manners VPT was it to wide and flare the ends out? Just got one and it’s a bit tight

@CHenry1951 2 года назад

Josh, how's school going ???????

@stevereese6488 Год назад

I looked at the standard element 4, not the magnesium one, and it says factory magazines only for the cz457. It looks like you are using the anarchy mags with extensions just fine. I was thinking of getting a standard buffer tube with a magpul prs gen 3 buttstock and add the barrel channel weight under the Lilja barrel.

@PursuitofAccuracy Год назад

Hey Steve. My daughter uses the element 4.0 and she is using the anarchy mag extensions. Now I will say the ACC is a very tight fit. Meaning you don't have much room to sneak a finger in there to release the magazine. I'm just extremely use to that setup so it's not an issue for me.

@stevereese6488 Год назад

@@PursuitofAccuracy I'm leaning between this stock and the pdc custom g5c, either one I'm sure I will have to add weight. I just installed the Lilja barrel a little over a week ago. Very happy with it but it's still in the pro varmint stock. I did do the Pete's pillars and the aluminum magwell with the anarchy outdoors extended mag release that is not made out of metal. I have several anarchy mags with the mag extensions and the short action custom extra mag holder. Pretty messy weather this week.

@PursuitofAccuracy Год назад

@@stevereese6488 having seen both id steer you towards the element 4.0. The pdc custom is a good chassis but the finish is just very rough.

@stevereese6488 Год назад

@@PursuitofAccuracy well, pretty much all the aluminum chassis out there are from a few months to 7 month wait, so I narrowed it down between the krg bravo and the mdt xrs. I went with the xrs and added the weight and their 10.25 inch mlock arca rail, the weight is about a 2 month backorder but the rest should ship this week. Maybe one day in the future I will look into the aluminum chassis again but I think this will do fine for now and I think I can adjust it short enough on lop for my grandsons.

@ihunt_ Год назад

I do love the series on the build but can’t justify the limited increase in accuracy over the stock gun…especially with not testing more ammo…for similar money I would rather bite the bullet and buy a custom barreled action. But love the video series.

@PursuitofAccuracy Год назад

Yeah i can totally understand that

@hangarpilot1895 2 года назад

Is the aftermarket aluminum chassis any better than the stock one from CZ?

@robertmikell7938 2 года назад

Hello josh, you mentioned some 22 ammo boxes made by someone on Facebook and I can't find them or the video they were mentioned in now that I am ready to purchase can you please let me know

@hotchihuahua1546 2 года назад

What power on your scope do you find yourself using at 50 & 100 yards ?

@OrangesmokeM7 2 года назад

👍

@thangcung1993 2 года назад

Hey josh how it take for the shipping?Thanks❤️

@visiter127 2 года назад

What size target do u shoot at 400 and 500 with this please

@randomidiot8142 2 года назад

Cold weather does funny things. Yeah, it makes the lube cold and your latest project breaks your heart when it doesn't feed. Or it drops a shot low after a 30 minute wait for a pest to peak it's head out of a hole..

@lw8447 2 года назад

What scope ?

@arkimedelab 2 года назад

Just seeing these videos I suffer too much. from me in Italy this kit costs 1900 euros while you pay $ 500 for it. is there a good soul who can send it to me ??? thank you

@brianschmunk9490 2 года назад

absoultily no offence to rimfire, their cheap to shoot and had have fun with, but my 338 lupia will??????? sory bout spelling, lernt to shoot before spell

@randomidiot8142 2 года назад

338 Lapua is overpriced and overhyped. Might as well shoot a 50 bmg for the money you're spending. More bang for the buck. Lol.