Both products were parts that could be used to upgrade the board with relatively little spending. I was also satisfied with these products, so I can recommend them to those who want to experience them. Also, if you are interested in DIY, please visit the Newbee website as there are many other parts. (200x70 tire / Katana footstop discount code: Kami5off) 두제품 모두 상대적으로 적은 지출로 보드를 업그레이드해 볼 수 있는 부품들이였습니다. 저 또한 만족스러웠던 제품들이였기에 경험해보고 싶은분들께는 추천드릴수 있는 제품들이였습니다. 또한 DIY에 관심있으신 분들은 다른 부품들도 많으니 뉴비 홈페이지를 방문해보시길 바랍니다. (200x70 tire / Katana footstop discount code: Kami5off)
Yeah, I think it was the thickest single tire I've ever used. If you have a chance, buy one and mount it alternately in the front and back. You'll see where it helps your riding style. Thank you as always bro :)
@@KAMiJUINs maybe they could work on the Z3? and replacing the stock shoks with the Taiwan EXA 291R 125mm bicycle rear shock absorber might make it even more amazing 👍
I love me so thick, wide wheels. I really wish Mboard novas were wider. But they are just slightly unbalanced then the sunmates that came stock with the board.
Oh, is that so? I didn't know because I had not used it. I guess that as the performance of the boards gets better and better, there will be a lot of thick tires and wheels on the market in the future. Let's wait and see Thank you for watching :)
Were you riding in Songdo on Friday (24th) around Noon this past week? I was on my Flow and passed someone also riding an esk8 who looked like you… well, the helmet anyways! 😂
I didn't use Newbee Rev1 hubs. I used hubs from the previous generation of Rev1. So the width of the hubs was different. (Rev1 Outer width: 76mm / Mine 65mm) The width of the hub is too narrow to be mounted on a major standard hub, and the diameter of the hub is much larger than the inner diameter of the tire to be mounted on a track & road hub. And even if you purchase the hub together, it will not fit the major gear drive adapter... It seems to me that is impossible.
Now with those tyres the Acedeck reminds me of a Losi DBXL 😅😅👍🏾 Finally the board looks like it’s got the correct proportions. Just to clarify, could I put these hubs & tyres on a Z3?
Thanks :) Hubs are perfect for adapter compatibility on gear drives with this. Check it out acedeckboards.com/products/acedeck%C2%AEx-linnpower%C2%AE-next-racing-wheel
I don't think the front wheels will matter, but I'm not sure if the rear wheels and the gear drive adapter will fit... I don't have that hub(rev1) either. Can you check with Newbee? Thank you for watching :)
Question, you said this tire works with Newbee, Trampa, Linnpower, and Meepo hubs. You didn't list Acedeck, and Acedeck uses two types of hubs, one being a Linnpower, so I'm assuming you fit the tires on the Acedeck Linnpower racing hubs, not the regular Acedeck hubs? Second question, you mention if hub width exceeds 6.5cm the tire will fit. Acedeck regular hubs do not exceed 6.5cm, however, Newbee's website states the only requirement to fit the tire is a rim with an inner diameter of 4 inches - the Acedeck regular hub is 4.17inch. So based on Newbee's website, the regular Acedeck hubs (not Linnpower) work for this tire as well? Perhaps you'd need a spacer though? Thank you
Acedeck's Linnpower hub is the same hub as the quick-release wide hub I mentioned in the video. Also, as I mentioned in the video, Newbee recommends the use of spacers to accurately match the inner diameter of the tire with the outer diameter of the hub. However, it can be mounted without it. (I did it and tested it) And the regular hub of Acedeck cannot be mounted due to the thickness of the tire.
