Recently, the upload schedule of review videos has been messed up. So this time, I rebuilt an old trampa board that I had been putting off for a while. I added and replaced a few parts to the open belt drive trampa I built 3 years ago and rebuilt it in the desired direction. The result is a duo of trampa boards that we are very happy with. In the near future, once the schedules for other reviews are somewhat organized, I will also test the performance of the two boards. Please refer to videos #102 and #177 for the original build videos of both boards. 최근 리뷰비디오들의 업로드 스케쥴이 꼬여버렸습니다. 그래서 이번시간에는 그동안 미뤄뒀던 오래된 트람파보드를 리빌드했습니다. 3년전 빌드한 오픈벨트드라이브 트람파에 몇가지 부품들을 추가하고 교체해서 원하는 방향으로 리빌드를 진행했습니다. 결과적으로 매우 만족스러운 트람파 보드의 듀오가 완성되었습니다. 조만간 다른 리뷰들의 스케줄이 어느정도 정리되면 두 보드의 성능 테스트도 해보겠습니다. 두 보드의 원래 빌드 비디오는 #102, #177 비디오를 참고해 주세요
Hello, I have some Trampa 9inch Primo Striker wheels, which website says fits 4 inch rims like the trampa phatlads. I used Acedeck 4.17inch rims, but the diameter needs to be 4.5 inches to fit unfortunately. Do you know how Trampa rims fit their bigger tires, despite having smaller diameter than the Acedeck rims? I am so confused, thank you. I reached out to Trampa but they never responded. Edit: Or if you could measure the diameter of the rims on the extreme all terrain board, that would help!
Hello there The Trampa hubs below can accommodate 9-inch tires. trampaboards.com/trampa-phatlads-5-spoke-offset-hubs-3754-x-25-inch-p-28747.html trampaboards.com/primo-3-spoke-composite-hub-3754x-25-inch--perfect-for-9-inch-tyres-p-10079.html trampaboards.com/megastar-9s-offset-hubs-3754-x-25-inch-c-2094.html trampaboards.com/trampas-custom-4-x-3-inch-deepdish-megastar-9-hub-of-your-dreams-any-combination-possible--fits-upto-10-inch-tyres-too-p-31720.html
@@KAMiJUINs I think I figured it out. Trampa measures inside rim diameter and lists as diameter. Most companies measure outside rim diameter and list as diameter.
