28kg Triple Motor Melt - Copper & Aluminium Ingots - ASMR Melting Bigstack Bullion 

Thank you so much for introducing me to devil forge I’ve been watching you since early 2018 any tips on getting subs

Hey matey I did this for well over a year before I got my first hundred subs which was very very slow all I could suggest is keep pushing videos out For more people to watch, unfortunately because of me I have noticed a massive amount of casting channels pop-up so that’s gonna make it rather difficult for them all to grow . Sorry bout that 🤦🏻‍♂️

bigstackD Casting Thanks for the tip, I really didn’t write that question well. I don’t mean it as competition this was supposed to be friendly and I can’t see me getting as big as you. At least we don’t game for RU-vid that crowd has too many channels. Good luck, I will continue to watch and enjoy your videos every Friday.

It isn’t that important but I didn’t read your reply all the way through I took that comment the wrong way. Sorry about that. One more question, it rained in Kansas last night after filming and I don’t know if that’s bad for a already cooled down furnace.

R.i.p. Grant Thompson. 1980-2019. Legend

I'd love a slag melt video. Either one jar, or all of them in a giant segmented/layered ingot.

Jseldon law I think he has a video where he does a layered ingot, not sure if it was slag or fresh melt

I don't wanna be the dealer shuffling a deck of aluminium.

@@Asdayasman I just wanna D to stack the deck in a big way.

dont forget fucked up music

если газ на-шару то вполне себе доход..... а так ну его на йух жечь покупные баллоны.

В точку.

Одним словом - антипод. Всю жизнь вниз головой ходит...

@@user-rt4sf8fj8cОткуда в Австралии газ на шару? Там ничего на шару нет.

@@user-rt4sf8fj8c Выгодней обмотку перемотать и двигатель восстановить .

Cheers James👊🏻😁

👌🏻😁

Она нмпрррппппаапп

Megan F are you talking to me or BigD haha? I’ve burnt myself so many times it’s not even funny anymore 😂😂

Megan F haha oh they did 🤣 those gloves are supposed to be better but when they heat up they are impossible to get off without getting burned. I have permanent blisters from these things..oh well 🤷🏻‍♂️ the joy of melting and showing others makes me happy so it’s all good 👍🏻 pain is temporary and pride is forever 😉

Megan F anytime I can help 👍🏻😊

You got me thinking. Imagine how strong that shelf must be o.O 😲

👌🏻😁

@bigstackD Casting THX

First we cover the dog in dirt to get the mold...

An ingot of Ingot. Delicious...

that will be a large lump of copper

The copper bar is no .999 fine is aprox. 90-98% copper 99.999 fine coper is super expensive 1kg can cost up to 50$ (USD)

Hey CHINEZU best do some more research matey or find another dealer as clean copper bar and clean copper cable is minimum 99% . The only possibility of impurity’s in clean Copper cable is maybe iron and oxygen and even with this your clean copper is still over 99%.

I know it is a large project but i did it my self and i actually learned alot from it, plus its bloody awsome having a 10 kg bar/ingot

y just one? do 6 and stack them!

Very cool idea!!!

Yeah this melting metal stuff surprises me all the time with its possibilities 😁👍🏻

Hey Poppa P how you been 🤔? I was just talking to my mate as you commented and I was saying I’m very soon gonna show the world how bloody easy it is to do a Lava Melt 🤦🏻‍♂️!! But only to prove how quick and easy it is and trust me I won’t take any pleasure in it I will be doing my normal video , full melt and casting and cleaning and other stuff on top👌🏻. I just wanted people to realise what a cheap cop out it is to melt some lava rocks for 5 minutes then pour it onto something for 1 minute and call that a video! it’s bloody disgraceful and it’s an absolute joke and from my point of view as a fellow Caster that’s just not right . Ok they might get the views but that’s all some channels want 😑.

I concur nice bike shot.

@@bigstackD lol i fukn hate Lava melts ..... wouldnt be talking about presstube would you ! loll

👌🏻😁🍻🍻🍻🍻

Cool matey will try that next time 👌🏻😁

Nugget Hey I saw you comment on another random video! What are the odds

Nugget I loved you in kindergarten and kindergarten 2

hello nugget i think jacksepticeye was looking for you

Waluigi I loved you in smash

I keep saying he needs to do a "consolidation" melt. All his like metals into single huge sand-cast ingots.

or a metal man cave just for him his friends his fans and ingot

Cheers mate glad you like them, I’ll definitely be doing my own brass in a future video so stay tuned matey😁👍🏻

@@bigstackD I'm still confused, is saying the word ''mate'' like saying friend but in Australia

Yes Kristian the word mate in Australia means good friend or buddy👍🏻.

Stupid... It can't get heavier... That goes against the laws of physics

@@Lunch_box okay man let me educate you :) I been doing this over 5 years and I have done High School with this domaine so I know something about it... Every material has inside structure of milion parts and when you warm up material that little parts will put back from each other, when you melt it that little parts will disappear and when that melt material pour into that casting jar it will very slowly cool down and that little parts will create again but they are far away from each other and that slowly cooling make that every part connect with other part and create very hard structure :) this take many hours to cool down on air so thats why its quicker put it into bucket with water because in that moment that little parts get cool down shock and their natural reaction is find some "partner" to connect with, otherwise when one little part cant find "partner" its very high chance that material just broke cause in some place isnt connect so he just cant stand that high pressure so he just explode and broke material :) and finally material gets heavier because that little parts will quickly connect in that cool down shock and create bigger squad than it was before melting... Of course its not like some +1 kg or something like that... Often its harder only like 0.1 kg or less but still it gets little bit weight up... So I hope you understand me ❤️ and you probably ask why would he put it in bucket and not on Ice... Well the reason is because in that cool down shock that little parts need to connect to each other and it can happen only in bucket with water, when he put that in Ice in many parts in that material that parts just cant connect so they just explode and create crack inside that material...So when it cool down he can make some surface adjustment and it will looks like good but actually inside of that material is somewhere crack and every part of material has different hardness so it can be problem when you go machining or cutting that material cause somewhere its hard somewhere its softer because that little parts couldnt connect to somebody in that cool down moment :) You can actually see that when he pick up that hot metal and put it on that Ice so mainly middle gets quick cool down but corners almost nothing... You can ask me anything about this I know what I'm talking about 😋😇

@@kerhy7666 to long didn't read, you lost me when you mentioned your high school education as a proof of purchase to buy your bullshit...

I said nothing about hardness... STUPID... I mentioned heavier... YOU CANT ADD MASS TO AN ALREADY POURED BAR BY COOLING IT QUICKLY... YOUR A FUCKING IDIOT

@@Lunch_box Hard to believe but its truth 😋 go learn on Melting High School and you will learn something about it ❤️

Matey you melt the metal you make the ingot you make the rules you could melt a big pile of brass shine it up and stamp it as gold if you like you’re in charge. Even if it’s only 50% pure you could stamp whatever the hell you like I put .999 as I believe that copper to be bullion quality as all imperfections and crap has been removed and it’s pure clean beautiful copper👍🏻. Some people will have a different opinion and say you can’t do that but really you can do whatever you want there’s always gonna be some haters out there😁

Годные моторы с редукторами! Хоть подъемник двери в гараж, хоть таль на балку, хоть еще какую полезную вещь можно было сделать... Мудак в общем... столько полезных вещей загубил.

@@konstantinakavivalzard2039 Там не принято изобретательствовать как у нас,что то сломалось,выкинул нах и купил готовый девайс.

Хмм, вы уверенны в том что двигателя исправны? Там люди далеко не глупые, и знают ценность таким вещам. Двигателя сгоревшие, перемоткой вряд-ли кто-то займется, так как это не рентабельно. А так будет материал в виде слитков.

😁👍🏻

Cheers buddy 😁

и я! хули он собирает все?

Вот по этому мы и живём в самой богатой стране в мире! У нас так принято, "СДАВАТЬ"!

@@user-ng2rc2hw8g Широка страна моя родная... Много в ней лесов, полей и рек... (а ещё много всего, что можно безнаказанно уничтожать, продавать и воровать...)

Когда руки из жопы и нет мозгов, единственное что приходит в голову глядя на это - сдать!)))

@@che3054 Вот из чистого любопытства, а какие мысли приходят на ум тебе? Я так понял по концовке ролика что автор видео в итоге таки это все и так сдает, просто видимо у них не принимают лом в таком виде как у нас, вот он и морочится с переплавкой.

Putin upvoted so they followed.

rsl6767 it’s his metal for his purposes and for his own projects. He can stamp them Fine Copper Butt Nuggets .999 pure if he so chooses. He doesn’t seem to be selling the ingots so what he marks them with is irrelevant.

Cheers buddy