2S LR Acro-Whoop - Adventures | Micro FPV

Подписаться 1 тыс.

Просмотров 7 тыс.

50% 1

Check out the new Facebook group!
/ 277932932797118
And MrShutterBug’s video:
• Power Whoop to the Peo...
\\\-A 5" QUAD THAT FITS IN THE PALM OF YOUR HAND-///
#onelipoedit
**PIDs BELOW**
**40g dry weight**
**3 min flight times**
**45+mph**
Build List:
FC/ESCs:
www.amazon.com...
Motors: www.amazon.com...
Frame (must drill holes to fit 1103 motors): www.amazon.com...
Canopy: Crazepony 2pcs Tiny Whoop Canopy with Screws for Tiny Whoop Blade Inductrix FPV Micro Quadcopter Mini Drone www.amazon.com...
VTX/CAM:
www.amazon.com...
Receiver: www.amazon.com...
Props: www.amazon.com...
Batteries (17g with short wires): www.amazon.com...
www.airbladeua...
LED Strip: www.banggood.c...
MORE INFO (from MR Shutterbug): • Power Whoop Build & Fl...
--PIDs and Motor Settings--
BF 3.3.1
Roll P: 40
Pitch P: 43
Yaw P: 70
Roll I: 40
Pitch I: 48
Yaw I: 45
Roll D: 29
Pitch D: 32
Filters left alone and Dynamic Filter turned on
Motor Settings:
V 16.7
Startup Power: 0.188
Demag Compensation: low
Motor Timing: Medium
RIP AWN \m/@_@\m/

Опубликовано:

5 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 33

@Xplicit_fpv 6 лет назад

Wow that rips!

@leftovercrass5210 6 лет назад

That range! I wasnt going to get one but i might now.

@OliFPV 5 лет назад

Smooth ride 👍🍀👍

@mrazalisalleh 6 лет назад

LDARC came out 2 new model..tiny whoops brushless osd GT7 & GT8

@Selio1231 6 лет назад

Awesome, subbed

@pauleverettguitar1568 6 лет назад

Frikkin brilliant!

@xfOL. 6 лет назад

very nice! :)

@kanta4goo 6 лет назад

Awesome flight! What power mode of video transmitter did you use? 25mW/50mW/200mW ?

@BGUFF 6 лет назад

Kanta 200mw 👍🏽

@johnharris2683 4 года назад

Carzy far

@BGUFF 4 года назад

Those were the days. Pioneering a new frontier 🤘🏽

@SFrank-tr6uw 5 лет назад

Is it selfmade or a model Like Betafpv? Looks insane fast. U Know about the mph? U have a full Part list?

@BGUFF 5 лет назад

Stephen Frank this is a self made 2S Whoop. Not BETAFPV. it goes about 50mph and the parts list is in the description 👍🏽

@TidewaterAerialSolutions 5 лет назад

Is that a speedometer

@BGUFF 5 лет назад

The number in the bottom middle of the screen? That is the pitch angle of the quad (how far tipped foreword it is). I have speed tested that whoop and it came in around 50mph

@FarCurryID 6 лет назад

do you use capacitors?

@BGUFF 6 лет назад

FarCurry I use caps on my custom 2S builds but not on the 75X so I’m not sure they are needed. Couldn’t hurt though I guess

@FarCurryID 6 лет назад

how to install led strip?

@BGUFF 6 лет назад

FarCurry there is an LED pad on the Super S F4 FC that you solder along with - and +5v and then you can setup / modify the colors in betaflight. You will need a programmable WS2832 style LED strip to be able to do this.

@FarCurryID 6 лет назад

Thank you very much. subbed

@ahmadzadit2729 3 года назад

What motor? 1102 10000kv? 1103?

@PaoloRendano 6 лет назад

esc dshot?! how much?

@BGUFF 6 лет назад

Paolo Rendano DSHOT 600 👌🏽

@PaoloRendano 6 лет назад

BGUFF my motor are very hot in hovering

@PaoloRendano 6 лет назад

BGUFF my motor are very hot in hovering

@BGUFF 6 лет назад

Paolo Rendano mine only ever get hot if I have too many vibrations the in quad. Like a bent prop. I had to isolate my FC top and bottom with soft foam which helps a lot

@gildardo 6 лет назад

My motors would also get very hot. I mounted the FC on too soft a plastic (TPU) 3D printed mount. I printed a new one in PLA and it's all good now. I used EaglePower motors and they are super smooth. Only when I have a bent prop does it affect the FC.

@karlosfandango 6 лет назад

any reason why you use 1103 motors when the other guy you gave link to uses 1102 motors ?

@BGUFF 6 лет назад

honestly there wouldn't be much difference between the two. I believe the 1103s are possibly cheaper, only weigh about .3g more each than the 1102s but should also give you more torque.

@karlosfandango 6 лет назад

Hi again having issues with my build ...just does not fly right. Have all same parts as listed expect different camera / vtx ( have spares lol ) butjust not want to fly right . Do you have the settings for betaflight etc ? Do you use dshot or oneshot for motors as if use dshot then get oscillations on the frame and can see it in the camera. Also batteries dont last long as all . Any help most appreciated Karl :-)

@gildardo 6 лет назад

Mine would also get oscillations, but it was because of the FC mount to the frame was too soft, 3D printed in TPU plastic. Do your motors vibrate too much? I use Dshot600 and followed the project mockingbird setup guide, with the exception of the PIDS, I used BGUFF Pids. It flies really smooth. I use the CrazePony 450mah stick batteries. I recommend the GNBs. They weight 27 grams with shorten leads.

@karlosfandango 6 лет назад

Gildardo Hi 👋 When have it on dshot 600 then get horrible oscillations… u can see the drone wobbling when hovering… if set to oneshot then smooths it out… but just not seem to fly right… sometimes just flaps over on its own… as for motor vibration… yes they do seem to vibrate a bit… I have tried with rubber mounts on the fc and without.. But still same… might have to try the mocking bird setup… see it helps