3-Day Engine Overhaul - Roadkill Garage Pilot 

"still free on youtube" RIP

Dulcich is HILARIOUS with the faces he makes when he’s bangin’ through the gears 😂🤣😂😂😂🤣🤣😂🤣

0:05 Roadkill isn’t free any more. We all miss the old Roadkill

"...still free on youtube." I'm very sad.

"When all else fails, just decide it's fine." DF is my new hero

tapered ring compressor, the single most pleasing tool to use on the planet ever, it just so satisfying using one....

Best thing was the cable tie spark plug lead separator!

This is what drug dealers do. The first one is always free.

Gotta love Steve's driving stance, head tilt to the side, arm lean on the window, banging gears like a badass!!!

I got Motor trend on demand and I don't care about paying that much, because of the awesome content. Its worth the money completely. Great job on that car guys!

You should make whole episode of Steve just driving and shifting gears like a champ. I would watch it!

Hey Dave Freiburger, I have a tip for all you guys. I have long lost count on how many coolant blasts I've watched you guys do.. ALL OF YOU!!! There is a simple solution to not getting coolant all over everywhere and having to spend the time to clean it up and work in it... Are you listening????? Ok, take a 2 foot long piece of 3/8ths tubing, (copper works very well), and a piece of rubber hose that you can squeeze onto one end of the tubing. Bend about a 90* hook in the end of the tubing that has the hose on it. Grab a few containers to catch the coolant. Slip the raw end of the tubing into the radiator and sink it to the bottom of the rad tank. Suck on the other end of the hose to start the siphon. Drop the end of the rubber hose into your container and drink a beer!!!!! This is a very simple tool to make, so you can make one for ALL the guys who we watch CONSTANTLY douching shop floors, parking lots and the occasional friends driveway... lol.. AND you can carry one with you each time you go on a ROADKILL adventure!!!! This doesn't do you much good on top tanks, but for all those General Masterbaters cars and truck you guys do, it will work just fine.... Love the shows!!! Ps. When are we ever going to see some of Dulcich's cars???

Fuck Motor Trend on demand.

This is awesome. You started with a garbage motor that didn't run and ended with a garbage motor that ran for a few minutes. I have to commend you, that's better than most people that rebuild Fords.

I just love how Dulsich was bang-shifting that thing like a religious ritual

i have been waiting for this my whole life, this is the way us real folks do it thank you so much for a show normal everyday people can relate too! this is what working on old cars is about! you have to have a passion and a good friend who shares your same interest! i wish i could do what you do every day!

3 words: Dulcich's driving face.

Dulcich looks like a badass banging gears haha

This video made me feel so much better about my own project car 😂 between the wrong flywheel and attempt at pull starting is part of what makes me really enjoy this show! Really just everyday people.

steve's expressions are hilarious and the way he's driving the car in the end is just funny as ever.

19:49 haha steves face shifting through them gears✊

this is awesome idea. you give people to see what this series is like before decide if they buy on demand thing. thumbs up for you guys

Love the non-impact socket on the impact gun, wouldn't expect anything else from Road Kill.

Dulcich looks so serious when driving haha

I would have waited the extra day for the bearing . Everything else was fine for backyard butchery but the leaving the bearing was in excusable

My son loves the zip tie plug wire loom. He's used it more than once and the guys at the Firestone store he works at have used it on their personal rides. He like myself have picked many tricks from Roadkill and refreshed our memory on some we had forgotten. This is why this show is so popular. You don't have to have a ton of money to enjoy the hobby. In my son's case it's a hobby and occupation. All he ever wanted to be was an auto mechanic. When he went to the local 2 yr. college the lady who assessed his test scores for the course(s) he had chosen told him with his math grades he could go into engineering. He told thanks just the same but his life revolved around turning wrenches. Damn good kid even though I guess I'm a little biased.

When he was banging gears you cant tell me he didn’t look at least slightly like a slightly older version of Nicolas Cage in gone in 60 seconds

Steve is perfect, calm and dry humor, but knows his stuff without making sure you know it

Dulcich could drive a shopping trolley and still look badass doing it.

Yas! My favourite! The 351 Cleveland, same engine that powered the MAD MAX Interceptor and Falcon GTHO's!

Whoa...that zip-tie wire separator hack is badass!! Thanks so much Frieberger 👍

I'm so greatful for both of you and MT team to bring to us your skills and good humor! Thank you Freiburger and Dulcich! I love you guys!

Hotrod Garage is great for beginners which is why I was always kinda bored but this! This! Is great! Its for the people who already know the right way to do it, but secretly wish they could just slap it together and not care :)

Love to see I’m not the only one that’s had these problems in the past great job guys very fun to watch but sometimes things do go perfect if you do enough of them

This channel is under rated. I aint even into cars but love to get to know the technicalities of cars/engines from a beginners prospective and this channel just oozes knowledge from experience all of which i have this channel to thank.

if you've never seen the inside of an engine, this is actually quite educational.

20:16 meanest upshift of all time lmao.

Dulcich's face while hes shifting is hilarious!!!!!!

brings back good old memories. that is what its like when you have to do a major fix over a weekend. I've done it many times. keep it up guys. steve

Steve is great. My favorite part of the show, besides the awesome format of showing actual work done by you guys.

Love this episode and the blunder of the clutch. It seems I am not the only one who makes these kinds of mistakes.

thanks for not showing the boring stuff about everything we wanted to learn u didnt show just like every other show

Just when I thought RoadKill was the greatest show on the RU-vids.... you go and do this! Great job as always!

Never seen Dulcich so happy as when he's hard shifting burnouts!

Steve Dulcich has the coolest driving pose lol. Looks like he ready to tear shit up!

Should have just waited for the new cam bearing.

13:45 one of the funniest exchanges I’ve heard on roadkill. MTOD subscriber by the way. 👍🏼 love the content, totally worth it.

One of my favorites. Steve's test drive at the end is epic.

HAHAHA Dulcich looks just like i do when I'm trying bang gears

Much respect for being up front and not getting money hungry guys! Good luck to all your ventures anbd future videos. As long as you guys keep RK free and YT avalible Im good :D

The way dulchich drives that bad boy you can tell it shoots him back to his cool days arm out the window to the look on his face priceless ..get it my dude only car you worked on can bring on that amount of coolness.

man that Steve Dulcich really knows how to power shift like a boss

I enjoy Roadkill, but this "trend" of paying for limited content is not really my thing. You would have been better off doing an episode with product placement here on RU-vid, you're using those parts anyway...

I disagree with David. The Cougar is a beautiful machine!!

I LOVE that car I had one exactly like that one in the mid 70's except it had a 289 4 speed ,it originally had an automatic and was changed to the 4 speed without changing the gearing so it was a dog getting off the starting line but I wouldn't shift into 3 until the finish line of 1/4 mile. Of course mine still had good paint and no dents or rust. I traded in a 65 Mustang convertible with a 289 Automatic that I literally wore out street racing, I had to drive it 14 miles to trade it off and I had to stop and put oil in it. It was sold to the paper guy who drove it for a couple of years, it looked like a mosquito fogger going down the road. I would love to have both of those cars back today, I am 59 and when I had those cars I was 15-17. Thanks so much for this video I loved it. It reminded me of the way I had to keep those two cars running. I changed the tranny in the Mustang 6-7 times by myself sitting in front of our house, I actually got really good at it, jacked up the car climbed underneath unhooked and unbolted every thing and drop it on my chest and back out from under the car, Those were the days, I can't even change oil in my vehicles now due to arthritis I am guessing too much fun in the good old days.

i watch mostly for the comedic value. That Dulcich and Freiburger comedy is priceless.

We called that rebuild a Dirt Motor rebuild. Did dozens of them with very little problems.

Dulcich left the tag hanging under the arm of that new Dickies jacket 😉

I watched some of this and I liked it a lot. I'll pick it up again and try to determine why you left that cam bearing like that. (the three day deadline deal?) You guys must have known better than to expect to fire that up for the first time by pushing it. The honesty of showing stupid mistakes is especially refreshing. Keep up the good work!

I dig how Dulcich holds his head all off to the side (@19:51) while rallying the piss of this poor thing...like it's some sort of therapy. Keep it up dude!

as of now. I'm 12 minutes into this video. Iv been watching it for 2 hours. the beauty of straight talks "unlimited" data.

"Are you volunteering me right now?" Everytime I ask that, I get the response, "No, You're being volun-told."

As the owner of a sometimes-running '68, I'm so happy to see a Cougar made it to Motor Trend. I always assumed you guys were not FoMoCo guys. (I know the Stubby in Episode 44 was a Ford, but still)

Probably the best pilot episode of any show ever.

11:00 Never touch a cougar without wearing protection.

so... did they change the bad cam bearing?

Loved Dulcich on Roadkill.... great edition to add the the amazing cast of people.

Dulcich looked SO appropriate ripping those gears! 😂

"Roadkill is still free on RU-vid" Mmmm.

Steve Dulcich drives like a demon out of hell. its a compliment

This inspired me to pick up a 67 Cougar on my channel. It was my first car when I was 14, brought back a lot of memories. Love the Bang Shift Cougar!

I laughed so hard through this episode!! Their back and forth banter and just all the fails like the flywheel diameter and then trying to start it by towing and the fire!! OMG I couldn't breathe I was laughing so hard! EPIC!!!

I always thought the cougar looked better than the mustang Im not alone right?

Im happy that Roadkill still will be free :) Thank you!

We need more Dulwich that guy is a great addition to the roadkill crew

I really like how they actually show cottage of disassembling the long block,and getting into the heads,shows usually cut past the messy stuff in between

How surprised were you guys about the Cleveland power? Curious what Chevy/Mopar guys first experience driving one was.

I dont want on demand thingy, doesnt youtube ads pay enough???

This feels so much like some of the junk me and my buddies used to get into! ...and some of the junk I still have in the driveway. Ha. Great show! I love that you're not in some spotless, million dollar garage stocked with half a million dollars worth of tools.

Thanks for rebuilding a Cleveland. My D1AE is coming out of the Pantera soon (I'm not going to rebuild it myself) but I will be able to take it apart and make a big mess!

You created something beautiful, then started doing 30 min ads for Dodge, and now you're slowing moving content behind a paywall. And now every video feels like you're using RU-vid as a sales vehicle to drive people to your website. Best of luck fellas.

I found a complete butter knife inside a tire once.

The cougar is not ugly!! I love the look!

I like it! You did exactly what the average Joe would do in his garage, exactly what we want to see.

thanks for building a Cleveland! Looks more like 1970 2 bolt main quench motor than 72 CJ.

Hey, just like when I was in HS. Every project must be done by Monday morning.

I just signed up and paid for this on demand. You guys better make alot of these episodes!

OMG! This reminds me of the way we were in High school doing home rebuilds on a micro budget. LOL And of course needing it running by Monday.

Dulcich drives like a G

The end is near.

Dolcich is the kind of friend to rebuild engines with, Great friend to have.

Holy crap! I just bought a '67 Cougar this spring with a rebuilt 351C in it! My paint job is a tiny bit nicer though. :) Getting the front end rebuilt, it was completely worn out.

I love Steve, he goes full throttle and has an epic given her the berries face! :)

I guess I'd actually subscribe to MOD, but, y'know, outside the US...

Love this 67 cougar video. I bought a 69 cougar for 800.00 bucks in75 and the guy I bought it from, willie D at willie d,s speed shop in Milton changed out the old 351 and had put A hot 351 Cleveland in it he bored And stroked to the max and what I called a 3/4 inch low loop cam that had torque and hp almost like a hot 454. I took everything in our town that thought they had bad mopars. I did change out the card from a 650 to a 1150 and it had air like crazy. I’ve sat in one spot and blew two old cheetah slicks just for fun. I don’t know the hp of that baby but 383 up to 440,s was looking at my tail lights. I even took a bad vet with a 454. The little rich boy didn’t even turn around to come back to the line and shake hands. He kept going. A Torino ss took me by a half car length two years later. Woke up one Monday morning to go to work and pulled out on to the main rd and it slung a rod. I never was able to get her back to the torque and hp she had. Candy apple red with a half White vinyl roof. Straight 2 1/2 inch pipes with a set of hookers. She rocked from side too side and I always loved the way she sounded. Love all your videos dude.

The Cleveland heads.... awesome stuff

it took a month.. so why didnt you guys fix the cam bearing while you were busy fixing things

Dulcich is the bomb. I'm going to go ahead and subscribe, you guys make fantastic content.

Watching Freiburger and the other guy is like watching Beavis and Butthead building a motor

Back in the 70s this was how we used to race at the local circle track! It had to be done in no time with no money, and usually exploded in an intertaining way. Man! i miss being 17!