#3 How To Design A Circuit Using KiCad 7.0 Schematic Editor |

Подписаться 6 тыс.

Просмотров 43 тыс.

50% 1

This video video is a part of KiCad 7 tutorial series, Which will take you through the journey of learning KiCad 7 from scratch to making your first Printed Circuit Board.
In this particular video, We'll discuss how to make a schematic using KiCad's schematic editor. Also discuss in detail about how to add components symbol, how to add power symbol, deleting components, components value, designators, wiring and changing the appearance of the wiring.
Digital Diya Project : github.com/Neutrino-1/SideQue...
Project Videos : • Digital Reactive Diya ...
KiCad Project file : github.com/pcbcupid/Kicad-7-S...
Like to learn what is PCB? You can check out our website PCB CUPID:
pcbcupid.com/
You can directly support us on Pateron : / pcbcupid
If you have any question or doubts regarding this video, You can drop your questions here : pcbcupid.com/questions/
Make sure to subscribe and share this content with someone who would love this!
▬▬▬▬▬▬ Follow us on other social media platforms! ▬▬▬▬▬▬
Instagram: / pcbcupid
LinkedIn: / pcbcupid
Twitter: / pcbcupid
Pinterest: / pcbcupid
Reddit: / pcbcupid
▬▬▬▬▬▬ Contents of this video ▬▬▬▬▬▬
0:00 - Intro
0:27 - Digital Diya Project
0:45- Small Recap
0:58- Digital Diya Circuit
1:20- Adding Components
2:12- Quick Note
2:28- Adding More Components
3:34 - IC pinout
3:57 - Adding Power Symbol
4:18- Deleting Components
4:36 - Components Value
5:06 - Designators
5:22 - Wiring the Components
6:50 - Outro
#pcb #learning #learn #printedcircuitboard #kicad #electronic #cad #how #howto #begineer

Наука

Опубликовано:

25 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 45

@jesusrdeleon 27 дней назад

Your rock!! I'm a fan. Spent days looking at other KiCad not match your teachings.. thanks!!

@pcbcupid 25 дней назад

Glad to help!

@varshanprabu6575 2 месяца назад

You started with lighting a lamp 🔥

@oreovios306 5 месяцев назад

it's the honesty for me in minute 6:50😂😂😂. This tutorial series is really helpful. Thank you

@pcbcupid 5 месяцев назад

😂😂😅 but Glad it was helpful!

@maka3636 5 месяцев назад

Informative and no bla-bla. Thanks a lot!

@pcbcupid 5 месяцев назад

Glad you liked it!

@vitalijk9611 9 месяцев назад

Great! thank you for this lessons !!!👍

@pcbcupid 9 месяцев назад

Glad it was helpful!

@TomahawkLabs 10 месяцев назад

great vid, easy to follow

@pcbcupid 10 месяцев назад

Thank you!

@hacksontable5850 4 месяца назад

Great Tutorial👍

@pcbcupid 3 месяца назад

Glad you think so!

@ahmedghallab5342 9 месяцев назад

شكرا Thanks

@pcbcupid 9 месяцев назад

Your welcome!

@Max_Bio 3 месяца назад

any example for EMG?

@c2h7 Год назад

Thank you for this nice beginner tutorial. How do you get the wires to connect nicely to the components? When I try it with my Kicad 7.0.1 the little "+" does not appear on the wire tool when I hover over a pin. And when I try to draw wires, it is very hard to get them connected correctly (it actually takes many minutes for just a few connections!) - also when moving components after the wires are connected, they detach from the wires, instead of dragging them with the component, like I'm used to from Eagle. Is that the way it's supposed to work?

@pcbcupid Год назад

Some of these solutions can fix your issues : 1. Try to keep the grid settings to 1.27mm or 50mil 2. hover the cursor over the pin (where there is a small circle indentation) and then use the shortcut 'W' to draw the wire 3. Using the move shortcut 'M' will cause the wires to detach from the component instead just click and select the symbol, then try dragging it. I hope these solutions will help.

@c2h7 Год назад

@@pcbcupid Thank you! Meanwhile I had found the solution myself: I had set the grid to 1.27mm (50mil) and it was displayed that way at the bottom of the screen. But somehow it must have not been effective, I don't know how. When I found the tip "right click on the grid symbol in top left to change grid settings" I saw the "current setting" was something really small. So I hit ALT+1 and re-snapped everything to grid (CTRL+A, rightclick, align to grid) and FINALLY I can work decently :-) Another important tip I read somewhere is to NOT use "M" to move things around, but rather "G" (grab) which leaves connections attached. Now I also get the little "+" I was missing ;-)

@pcbcupid Год назад

Goodluck! Thanks for the sharing tip as well.

@santhoshc2786 Год назад

🥰

@pcbcupid Год назад

Thank you!

@busra4386 Год назад

thanks for the video . how can i change power supply as "vac" value. I'm trying to do dc power supply 220 V, 50 Hz but i cant change the value. whats the solution of this problem

@pcbcupid Год назад

Which power supply symbol are you using? You can change the value of the symbol by going to the properties. (right click on the symbol and then click properties or select the symbol and use the shortcut "E")

@busra4386 Год назад

@@pcbcupid I added the source seen as AC_voltage source used in multisim program as “vac” in kicad. But in kicad, I can't enter a value like in my multisim. I have to use this design ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-DaY3ruHjnIk.html

@pcbcupid Год назад

@@busra4386 If the symbol is part of power symbols there value might not be editable for example : +5v, +3.3v, VCC, VAC , AC etc Instead you can use a 2-pin terminal to indicate the AC supply and add AC power label to the net. The circuit used in the video we follow the similar method. Where we use "Cell" to indicate the DC supply and then attach a +3.3v power label.

@busra4386 Год назад

Well, can i use screw_terminal_ 01x02?

@pcbcupid Год назад

@@busra4386 Yes that would be perfect.

@vimalraj9360 4 месяца назад

How to draw schematic with multiple pages in Kicad for Complicated boards ?

@pcbcupid 4 месяца назад

It's explained here : ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-nbiwXsXPYxc.html

@DarkKniight89 9 месяцев назад

I have a project in mind. Started a year ago but lost interest because I couldn't find a way to make it happen. I have a good idea on what I want the PCB to do but don't know how to make it happen. I have KiCad but don't know how to use it. Even if I did I still don't know where to start. Would anyone be able to help me out. Is there a place to go to learn about PCB's? All I want is a Round PCB that has a button on the side that turns on a LED. It needs a battery so that the LED will turn on. The PCB will be going into a watch. Any help will be greatly appreciated. I would like to learn it myself if possible but don't know where to go to learn. Thank you.

@pcbcupid 9 месяцев назад

Thanks for reaching out, please drop this question here : pcbcupid.com/

@DarkKniight89 9 месяцев назад

@@pcbcupid Thank you. I sent over my question. I hope it went through.

@gaurisharma6795 5 месяцев назад

sir in my kicadtool the arow size of+ is so large how to minimize this

@pcbcupid 5 месяцев назад

You can turn it off, by using the toggle button on the left toolbar. It's called "Switch display of full-window crosshiar."

@katdalo6118 Год назад

@1.06 minute i want to see the another video

@pcbcupid Год назад

We'll soon work on that video!

@silnyye4403 Год назад

1:06 so where is the video? Just asking thank you.

@pcbcupid Год назад

The circuit was done using TinkerCAD, once the KiCad 7 series is completed we'll probably make that video.

@silnyye4403 Год назад

@@pcbcupid thank you for the reply. Cheers!

@pcbcupid Год назад

🙌🙌

@sujitpal3672 7 месяцев назад

Where is BC547?

@pcbcupid 7 месяцев назад

To keep the circuit simple, we are trying not to drive any part of the circuit using a transistor.

@lars-gunnartengerstrom8276 3 месяца назад

Every time someone demonstrates a function in KiCad.. So it takes ages to arrive at What is essential. WHY.....?????

@pcbcupid 3 месяца назад

Kicad is very powerful when you understand its inner workings. Specially some functions can do multiple operations, so it's essential to know all the workings. Maybe that's why it feels too long ?