3 LEVELS of Adirondack Chairs -DIY to PRO Build

Подписаться 1,2 млн

Просмотров 404 тыс.

50% 1

In this episode of 3 LEVELS, we take it outside for some Adirondack chairs done three different ways. DIY to PRO Build!
Sponsored by WOODCRAFT - bit.ly/JM2021_...
TOTAL BOAT Halcyon Water-Based Marine Varnish - bit.ly/TotalBo...
SQUIRRELLY STICKS ARE BACK - bit.ly/JM_Squi...
PLANS AVAILABLE
DIY Beginner PLAN - bit.ly/Adirond...
INTERMEDIATE PLAN - bit.ly/Adirond...
PRO PLAN - bit.ly/Adirond...
1/4" MDF TEMPLATES AVAILABLE
INTERMEDIATE TEMPLATE - bit.ly/Adirond...
PRO TEMPLATE - bit.ly/Adirond...
If you like this video you're going to love these.
3 LEVELS of Cornhole Boards -DIY to PRO Build - • 3 LEVELS of Cornhole B...
-3 LEVELS of Cutting Boards - Beginner to PRO Build - • 3 LEVELS of Cutting Bo...
3 LEVELS of Cabinets -DIY to PRO Build - • 3 LEVELS of Cabinets -...
3 LEVELS of Sawhorses: DIY to PRO Build - • 3 LEVELS of Sawhorses:...
3 LEVELS of Shop Carts - DIY to PRO Build - • 3 LEVELS of Shop Carts...
-3 LEVELS of Bar Stools: DIY to PRO Build - • 3 LEVELS of Bar Stools...
MERCHANDISE - shop.johnmalec...
PLANS - www.johnmaleck...
SAFETY GLASSES - geni.us/4h6xaM (Amazon)
Proudly Supported By:
Woodcraft - bit.ly/JM2021_W...
Timberland PRO - bit.ly/JM_Timbe...
PIT BOSS - bit.ly/30Q9AeB
Lincoln Electric - bit.ly/JM_Lincoln
Total Boat Epoxy - SAVE 5% : www.totalboat....
BITS & BITS - bit.ly/JM-Bits CODE - MALECKI15 = 15% Off
My Top Tools and Product Affiliates
Woodworking Tools - kit.co/JohnMal...
Metalworking Tools - kit.co/JohnMal...
Favorite Finishes - kit.co/JohnMal...
My Camera Gear - kit.co/JohnMal...
#AdirondackChair #OutdoorFurniture #3Levels

Опубликовано:

6 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 215

@ryangrissom3532 3 года назад

Jordan is really getting comfortable. His tricks and tips were great in this video compared to previous 3 level videos. Especially for a beginner to learn some new stuff

@jordanheider2662 3 года назад

Appreciate it!

@alfonsoPina 2 года назад

I can be completely honest and say I've been binge watching these guys. I really like this beginner, intermediate and pro level builds

@rmr5044 3 года назад

The beginner one seems the most modern looking. With just a bit more time spent on it, it would easily fit the aesthetics of some modern uber-expensive home

@taliamon 3 года назад

John, "Jordan, you're doing the beginner object! Get to it!" Also John, "Jordan, get Miss Piggy running and CNC the templates Sam and I need to look awesome!" Are we *sure* Jordan's the "beginner" here?

@jordanheider2662 3 года назад

Glad someone sees what really goes on

@branonedwards7128 3 года назад

Jordan is the beginner because Sam and John COULD do it by hand, but they hired the kid to do tech stuff. He gets payed to do the computer work

@peterpetersen3242 3 года назад

Jordan, Kid, Beginner...i only see the CNC Cowboy

@jordanheider2662 3 года назад

@@branonedwards7128 it's more than just pressing a button

@sharkz401 Год назад

So you want to swap jordan with sam or john?

@deanwylie9893 3 года назад

Never in my life have I enjoyed watching men play with their wood. Thank you gentleman for this entertaining video and for showing us what a real professional can do with their wood.

@tcat210 3 года назад

I really like how Jordan uses more DIY/Hobbyist tools for his build, get a better idea of what you can accomplish with the different levels of tools you may have.

@michaelm077 3 года назад

All levels look great, more Bear in future videos, he was the real star today.

@ajayala5992 3 года назад

IMO the rocking chair is a game changer. Lots of other plans out there just sit flat, comfort level and selling value go way up! 🔥 🔥 🔥

@loopinnerthe 3 года назад

Jordan wins it for sheer simplicity clean lines and easy buildness. Sam wins it for great looks super sexy curves and clean execution. John wins it for sheer pomp and brass. Great vid, great variety, no winners or losers.

@alexdixon6518 3 года назад

am I the only one who liked Jordan's the best? just the minimalist design looks so good.

@SycsFinest 3 года назад

Love that you guys are offering up the CNC plans and templates. Very cool. Great summer time build.

@SpatialDragon Год назад

I like the middle one. I am surprised you did not follow a more traditional form, but then again, it is you. They all work.

@albertj2459 3 года назад

Oh the irony of the "expert" using the "beginners" CNC skills to make the rocking chair look good 😅

@douglasbedini9342 3 года назад

Love watching these guys build things and this is one of my favorite series of videos. It'd be interesting to see them do 3 levels of birdhouses and see how creative the guys could be based on each skill level....but without using the cnc.

@malonecustomdesigns 3 года назад

Intermediate was the real winner here. But wow, that Pro chair is huge!!! lol

@Zamboni-0805 3 года назад

And heavy...

@augustineschaefer5522 2 года назад

Thank you for the ‘kids can try this’ baby steps and the elevated diy versions!

@emmabingham544 3 года назад

Could you do a 3 Levels of… outdoor dining tables? Great job on these chairs, I love this 3 Levels series.

@briturner11 3 года назад

Jordan's section is getting super good.

@seancampbell2456 3 года назад

Jordan doesn't get to do templates on his build but hes the one who makes the templates for the other two

@timthompson7205 3 года назад

Are you Jordan’s boyfriend? Is this a gay rights thing? Are you a gay rights activist?

@jordanheider2662 3 года назад

@@timthompson7205 you jealous?

@timthompson7205 3 года назад

@@jordanheider2662 how did you know?

@robm9772 3 года назад

I’m actually building the Rockler Adirondack chairs right now. I also had to laminate some 3/4 cedar together for the structural parts. Glad to know it wasn’t a dumb idea.

@KingsFineWoodworking 3 года назад

Nice chairs! Great video!

@TheBlueMuzzy 3 года назад

Daaamn. I have the ultimate flush trim bit, cleaned and sharp as hell, but it STILL burns maple. You chewed through those curves with NO burning issue. So good.

@rsa.crabguy7583 Год назад

I think the one thing that stood out the most to me about all 3 chairs was the back, near where the head/shoulders would rest. For that I'd have loved to see those corners softened with 45's on each side, but that's just something i'll have to do when I decide to make one for myself!

@joshweaver8806 3 года назад

Am I the only one who likes the beginner best and the expert least?

@johnnysheffield8523 3 года назад

I think it’s based on the skill not the looks

@joshweaver8806 3 года назад

@@johnnysheffield8523 oh I know. And the expert skill level is definitely way more advanced. I just thought it funny, the one that’d take least time to make was the one I’d like to have the most.

@mlubecke 3 года назад

♥️♥️♥️ Bear !

@NerdyFamily 3 года назад

The intermediate one was my favorite

@RedBurny2316 3 года назад

3 levels of Awesome Sauce! Thanks Guys, these 3 level videos are my favourite of your series 👌

@jaredharrington24 2 года назад

All look awesome. But the beginner still looks the best. 🤟

@grahamredfern8969 3 года назад

Jordan wins that one.

@SchysCraftCo. 3 года назад

Love this video series boys. Very nice job and video. All 3 turned out very well. Hopefully you all get good use out of this summer. Can't wait to see ur next videos. Hopefully many more in this series. Keep up the great craftsmanship and hard work boys. Keep making. God bless.

@budfry8406 3 года назад

Awesome chairs, really like the rocker John, but I’d have to go with Sams personally!! But thanks for the great video!!

@TheWoodFly 3 года назад

First +1 on your multi-builds and you listened to me from the last one: proper screws in the pocket holes (pan heads) and you used the trick of a marking block to mark and cut the angle on the back feet of the beginning build - NICE!. Second: If you CNC the templates, you can just as well CNC the parts - with the exception stated for wasting less wood by using the band saw. Third: "Tiny little head." Too funny - that almost slipped by! Fourth: Real +1 for the sprayable UV resistant epoxy. That's a really good upgrade from most outdoor finishes. Would be good to see what these look like after a year of exposure. Nice job guys!

@bradleyhall2971 3 года назад

Like them all. But all are a fail. No one put a place to hold your glass for beer or whiskey. Damn it Jordan, John and Sam.

@chrisnorwood2302 3 года назад

Good looking chairs, but you are correct! We need cupholders!!!

@bchantharath 3 года назад

i appreciate the craft & detail behind the advanced versions, but prefer the simple design of the beginner.

@BeastOfSoda 3 года назад

I find it hilarious how the different sizes of the chairs make them look like they belong to the three little bears. Great results as always.

@tjf8396 3 года назад

Amazing chairs! Also we need more bear!!!!!!

@c.a.g.1977 3 года назад

Really like the intermediate one. Jordan did a great job in explaining what he was doing - I see progress!

@micaweber9000 Год назад

If your bandsaw is not that good, you should look into the Harvey. It's top notch! i have one and i love it

@Daphoid 3 года назад

We've got a pair of these, but with built in foot rests. Love them. I am amused, in Canada (or at least in Ontario) we call them Muskoka chairs, named after the large region of cottage country these are typically found up here.

@michaelkvalvik7358 3 года назад

These vids sure do bring me down a notch... not sure I could even build the intermediate...

@bcreationz8618 3 года назад

Intermediate was the best design by far. Cool video boys!!

@imadeit 3 года назад

It’s the coolest time of the week, whenn Malecki team is on air with new stuff!:)

@7devilfurb 2 года назад

In process of building the intermediate ones from the plans I got from you! Would be so much easier with a template and bandsaw but my jigsaw got the job done! Thank you so much for the video! Love em!

@brianscott3021 3 года назад

It just seems like the intermediate is always my favorite

@toml.6884 3 года назад

if jordan wasnt in these videos i wouldnt watch them lol

@jordanheider2662 3 года назад

🥲 that hit me right in the feels. Made my day

@coyotewacker 3 года назад

Sam’s Chair Wins ,sry John ,,,lol

@DSqu4red. 3 года назад

Jordan at the end had some real Mike Wazowski vibes, getting covered by the Other Video tiles

@jordanheider2662 3 года назад

Literally every time

@omnicrop9175 2 года назад

My high-school grade 11 project was the exact same as the intermediate but with a semi circle cut on the top-backing for more of a head rest look

@j1ones11282 3 года назад

Thought Jordan was going to say all you need is this dog😁

@markroper9269 3 года назад

Now we know the importance of pre-drilling screws and using trim screws and not drywall screws on the right side of the chair. :P Keep learning guys!! Great video!

@Mike-In-O-Town 3 года назад

Get with the program...Bear needs a couple treats!

@ktillers4502 3 года назад

The video I have been waiting for! Keep up the great work boys!!

@Ashe_Fenrir 3 года назад

WELL AXCTHUALLY shou sugi ban also stops them soab bugs from messin with your outdoor furniture (along with moisture, rot, and UV resistance). Siiiiick builds lately - ya'll keep making a video about the work I need to do right before I do it - that's like 4 series in a row... other than the kayak but my pool is pretty big...

@KJfreshh69 Год назад

Beginner chair looks the best anyway

@brandt520 3 года назад

Sam - our dog likes to go places and do things, and is also used to sitting in the yard watching me do work. Give us a shout, we’ll be happy to supervise your next video.

@angrymater13la 2 года назад

Why the Hell did I jump when John yelled "HEY" in the beginning lmao

@jamesbarros950 3 года назад

In the beginner chair, I’ve got the pockethole jig he has. It’s $15 at Rockler (or wherever) and totally worth it

@synister208 6 месяцев назад

Badass! But all yeans forgots the CUPHOLDERS!!!!!

@jordanmeizlik5111 2 года назад

Sho sugi ban shrinks the pores in the wood and makes it more water resistant

@stephenmobley8724 3 года назад

Go Preds!

@John_Malecki 3 года назад

Never heard of them....

@stephenmobley8724 3 года назад

@@John_Malecki lol… that’s ok, most people haven’t heard of them unless they understand the pains of the old expansion drafts where you had to actually earn your way to the top… or just recruit an all star right out of college…:/

@MCsCreations 3 года назад

Fantastic work, guys! 😃 I really loved the chairs! Stay safe there with your families! 🖖😊

@gregorydenton5312 5 месяцев назад

I know I’m late to the party but I’m gonna try making two next weekend

@Johnny_Stein 3 года назад

Dammit Jordan, good job..!

@harryadavis650 3 года назад

great chairs, but I like SAM's good job all the way around....great video!!!

@GibClark 3 года назад

Niiiiiiice 👍👍👍👍👍

@SxmTech101 3 года назад

Can't wait for the next one

@zxanderford6810 3 года назад

You guys are great love your show

@jimblack6733 3 года назад

Nice chair build you guys! Jordan is really getting the hang of it…

@jordanthefsgamer1170 3 года назад

thank you

@tg4cardinals357 3 года назад

John I’m curious, how long have you been doing woodworking? Also, how did you learn everything you know? Sam and Jordan too if you feel like sharing

@Mike-dy8bq 3 года назад

John broke wind at 11:29 LOL

@John_Malecki 3 года назад

🤣🤣🤣

@walkerscott77 3 года назад

Great works lads keep on trucking

@arshiyarimi333 2 года назад

Fantastic work❤️ I really love the chair❤️

@yummycooking450 3 года назад

oh good job

@jeffyerkes5777 3 года назад

Love the videos you make. I would like to know how challenging it would be for you to make a glider rocking chair? Maybe do a video on you making one I feel like it would be a challenge.

@imthatguy9747 3 года назад

Pinkies up, let’s go. Need to be on a shirt.

@theMaDNesS201 3 года назад

just saw this one, but i have to say, I think Sam wins again! Johns chair is nice and all, but a rocking Adirandack chair? hahahaaha

@bjspyder4148 3 года назад

Sam's is the closest to the traditional form. Reminds me of summer at camp. I'd like to see the arms of the rocker a little higher relative to the seat.

@bobbyfowler7319 3 года назад

Love your "levels" shows!

@territ1231 3 года назад

Love all your project videos!

@SteifWood 3 года назад

No doubts, the intermediate had the best workmanship. If you wanna do a pro version you first make a mock up (and not wing it like this), then find all details and adjustments, then cut and assemble without fake joints, ie traditional mortise, tenons and wood pegs.

@jaredcoffin3907 2 года назад

How to make chairs in 1000 easy steps. Come on fellas. I can name that tune in three notes. 🎶

@rusticbalancebymarcus 3 года назад

Awesome vid, don't know why I was expecting the tiktok loop

@shawndanahey5499 Год назад

Nice pens shirt!

@canadiannavywife434 3 года назад

Great video. I want to challenge your creative juices to make a chair like this but that is portable for the campers in our lives... I have no clue how it could be done...so I give you this.... Hugs from Esquimalt

@rhidoykhan9422 2 года назад

Excellent

@cswatson4823 3 года назад

They all damn good.

@bg2608ret 3 года назад

Another good video guys, lol keep up the good work 👍🏻

@Zamboni-0805 3 года назад

Love your channel, but most intermediate woodworkers do not have a CNC to cut out patterns. Just saying Regardless, my favorite was Sam's....The Intermediate Build

@Brian_Tylor 3 года назад

Thats a pretty Tenacious cut in you did there at 11:02

@hipairbrush1053 3 года назад

Awesome!

@gregmize01 3 года назад

Dang they're all nice!

@Dead_Raccoon Год назад

Я делал кресло адирондак с выдвижной подставкой для ног. Советую!

@LeavirtuS 2 года назад

I really liked your video

@toastedfoolery7137 3 года назад

Hey guys.... Lets Go Buffalo!! week 1 is gonna be interesting! lol

@sportstertaco 3 года назад

Jordan: Blow out wood.... Me: Whhaattttt???

@Hellyers 3 года назад

Sam wins it for me 👍

@ryandury 3 года назад

intermediate chair looks the most comfy tho

@gioazzarello1333 3 года назад

Yooooooo!!! This is dope.

@Maninawig 6 месяцев назад

One thingnI have been noticing is that Jason loves to mention the tools you need to get his project done, but always misses the screws and pocket screw jiggs.