No video :(

3 Watt Eagle Eye LED Install for DRL

Подписаться 217 тыс.

Просмотров 254 тыс.

50% 1

(10) 3W LED Eagle Eye Light
US: amzn.to/2VejMZm
CDN: amzn.to/3rmbP56
========
LED Info:
- Lamp Color: White
- Dimension: 35 x 16mm/1.4 x 0.5 inches(L*D)
- Thread Diameter: 10mm/0.4 inches
=======
In this video, I will show you how I used the 3 Watt high power LEDs to make the DRL light that I install into my vehicle. Please watch the entire video for all the steps.
=======
Shop Dial2Fast Store For List Of Tools & Parts
US: www.amazon.com...
CDN: www.amazon.ca/...
=======
Support Dial2Fast on Paypal
www.paypal.me/...
Support Dial2Fast on Patreon
/ dial2fast
Dial2Fast website
www.dial2fast.com
Like us on Facebook
/ dial2fastofficial
Shop Amazon
US: amzn.to/2LqTtuk
CDN: amzn.to/2L5QASt
Join Amazon Prime
US: amzn.to/31i05mP
CDN: amzn.to/3kG0D0R
Try Amazon Prime 30-Day Free Trial:
US: amzn.to/2S3GjHI
CDN: amzn.to/3kG0D0R
========
As an Amazon Associate, I earn commissions from qualifying purchases with the links provided here.

Опубликовано:

29 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 119

@TargaWheels 8 лет назад

I bought the red-version of these LED and it works good. I mounted them inside of my tail light housing to use as parking lamps, and use them at night when I do deliveries. Leaving my low-lights on or turning the flashers on usually starts to take it's toll on the battery over time. Hopefully because of the low current draw of these LED, the car battery will last a lot longer.

@armandoramos1949 4 года назад

Wow, that's very cool addition. It actually look OEM. Great job!

@Butterflytaxidfw 6 лет назад

Great video. Thank you for showing the actual installation

@ngnguyentrung 3 года назад

Good work !!!! Doing mine on my A3 Sedan today💪

@jorgevega238 4 года назад

Perfect job

@osjohnmagpale167 3 года назад

Nice build mate!

@lehcim777 8 лет назад

Like it, thanks for sharing, now I need some, that's just how it is.

@sushigaming101 6 лет назад

I've tried using these "eagle eyes" and they are HORRIBLE. When used on the outside of my vehicle, they got water damaged immediately and stopped working. I also tried using these inside a housing (completely sealed), and they start flickering. I took apart one of them to see exactly what the issue is, and found that the resistor is soldered on in the worst way possible (very brittle). The best LED's are the "trailer marker lights". Those are built for abuse in the rain and snow, plus they are about the same price.

@raphaelmahumane1648 Год назад

most of the time we waste our time doing DIY with things like this and come to learn that before you do anything to your car, atleast make sure if those lights are water proof or not based on the application requirement for outside weather or indoors. some of vehicles you have to cut some plastics to install those lights, and once done you can not reverse the action, now you have to find something similar to keep the hole occupied by something...

@Johnwenn1 5 лет назад

Very Good and well documented video. Well Done Excellent !

@frenchkey 6 лет назад

I did the same job on my car few years ago and only disadvatage is that they are not really waterproof. So far I changed 4 of them.

@godgunzndrumz 9 лет назад

Good job on the lights.

@geepors 7 лет назад

very nice! great DIY DRL! this would be very helpful for those who are planning to do it themselves. great job!👍👍👍

@geepors 7 лет назад

by the way, just a quick couple of questions... is the red wire the positive one? and does it need to have a relay or can you just tap it directly on wirings? TIA. :)

@dial2fast 7 лет назад

Red wire is positive, and you don't need a relay for this.

@geepors 7 лет назад

thank you a quick reply. do you think it is ok to tap it directly to the battery with a switch on the positive wire?

@707lonewolf 9 лет назад

nice very creative from far away im sure itll look oem good job

@dial2fast 9 лет назад

It's still working well today. I am happy with the look.

@nasurinhakimu 5 месяцев назад

Does it still?

@honeysingh3162 5 лет назад

Very nice

@OrbiterElectronics 9 лет назад

You did a good job there friend. Very nice.

@Emanual0607 5 лет назад

Fabulous!

@olechuga2 7 лет назад

Sir, a very professional job. Thank you for your video.

@FarhanNahin Год назад

How did you solder the wires together? Did the DRL fuse come with the kit? Or did they come like that?

@rogerserafin 8 лет назад

Very nice. Looks almost stock.

@FlipSideGarage 5 лет назад

Are these connected by all positive leads and all negative leads together?

@arturracer1166 5 лет назад

Yeap. Mine wouldn't work if connected red to black, red to black.

@ginpok6640 7 лет назад

very cool!

@suelo_abuelo8066 7 лет назад

Nice mod bro!

@teligon 6 лет назад

I've used these eagle eyes from different suppliers/manufacturers although they're probably all made by the same people, but the housing of the bulbs all began to turn in colour, with an ugly rusty bronze colour, and definitely not very waterproof. As soon as rain fell, a couple of them accumulated some water droplets and begun to mess with the electricals. Have you begun to experience anything similar with these?

@themikeymikechannel2947 8 лет назад

you should put 1 in each wheel well and show some of us how it's looks??

@Wally_GTO Год назад

How do you know which it’s positive and negative for the cables tho ? As usual red is Positive all the time ?

@dial2fast Год назад

Yes red is positive. Also you can test it first with a 12v power supply. If it doesn't light up, then swap the 2 wires.

@raymondkhan2709 2 года назад

Awesome video. Are these brighter then your old unit Do they throw light far

@dial2fast 2 года назад

I have a newer video on DRL ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-FbPFhNwGJzQ.html

@beckhamboy23cr9 9 лет назад

One of the sickest diy led job ive seen. what if i dont have a DRL module? Can i just tap to any light bulb in headlamp? Or use a fuse tap and power them with a switch?

@dial2fast 9 лет назад

***** Yes, you can run them off your ignition or through a switch. They can handle 14V no problem (with car running).

@beckhamboy23cr9 9 лет назад

dial2fast hey man. So i was looking on Ebay for a drl module and the 2 that i want say that the output is only like 15watts. I bought (10) 9w eagle eye leds and i want to put 4 on each side. So that'll make it 36w on each side? Drl wont be able to power them or even worst overheat and melt? Yours are 3w each so thats 15w on each side?

@dial2fast 9 лет назад

***** Those wattage ratings on the LEDs are over rated. It's typically not near 9w (or 3w) power consumption. You can always get a multimeter and measure the current draw of one of the LED using a 12v source such as your battery. 9W / 12V = 0.75amp = 750mA. See if your multimeter really shows that kind of current draw.

@arturracer1166 5 лет назад

@@dial2fast it seems the watts only means these LEDs should be as bright as regular bulb with similar wattage. It doesn't really take that much of power in real life.

@luckyhipolito4276 7 лет назад

how did u do the wiring did u put any relay or fuse?

@loyalty786 3 года назад

Hi interested to know what drill size is needed to make the exact holes on the plastic housing?

@BRYNDISFAN 6 лет назад

these are not weather proof. I installed on my tucson and they stopped working after being exposed to rain/snow in chicago's weather. Now, they looked cool when they worked

@iimditton 9 лет назад

Those are freaking badass, do u have a link to where u bought them?

@Thomas-lx8bc 8 лет назад

by installing these have you blocked your radiator at all? do they add any true extra lighting on the road are they blinding to incoming traffic?

@dial2fast 8 лет назад

+Thomas Does not block radiator cooling. These don't add too much light, just for DRL use.

@MrRangerZr1 9 лет назад

How do you remove the blank fog light cover on the odyssey? thanks

@dial2fast 9 лет назад

You have to get behind the bumper to push those plastic clips to release. Can't pry it from the front.

@fatjackson72 9 лет назад

Do you think these lights are bright enough to be used for reverse lights on the back of a jeep Wrangler?

@dial2fast 9 лет назад

They are bright to look at but don't really put a lot of light to be used for reverse.

@edgarmonzon624 4 года назад

How do they look though? As far as the output

@davwhit10 9 лет назад

Hi there, those DRLs look amazing, and really bright, just one question how long do your DRLs stay on for after you have switched the engine off, I have the same DRL controller as you and sometimes they can stay on for up to 3 minutes after the engine has been switched off and wondered if this was normal? Keep up the good work - David

@dial2fast 9 лет назад

When I initially installed the controller, I let the auto shut off feature to turn it off, but realize the time it takes to turn off varies widely anywhere from 30 sec to 60 sec probably due to the time it takes the car battery to slowly drop in voltage after shutting car off. So I ended up moving the controllers power lead from the battery to the car's ignition. Now it turns on/off with ignition (as seen in this video).

@beckhamboy23cr9 9 лет назад

dial2fast where specifically did u wire the lights after removing from battery?

@dial2fast 9 лет назад

***** I previously installed a DRL controller module (shown in another video I did). These 3w led were wired to that DRL controller module.

@butikito 9 лет назад

Hi, how did you solder the wires in 3:42 in order to connect them? Did you solder all red together and so with the black? Can you also connect them to a 12v cigarette adapter and plug them in the outlet inside the car? I

@dial2fast 9 лет назад

Leonard Nunag Yes, solder all the reds together, and all the black together. Then connect them to any 12V power source.

@butikito 9 лет назад

dial2fast Thanks! How about connecting them using a cigarette port? is it safe to connect 2 arrays of 5 bulbs each to the cigarette port?

@dial2fast 9 лет назад

No problem connecting to cigarette lighter.

@TheFearedhorizon 8 лет назад

how did u wire them up, i recently bought these and the wires are a pain to work with

@weeral1 9 лет назад

All that and no shot of them in the daylight.

@jasonmorehouse3756 5 лет назад

what video did you watch? its obviously not dark when he shows these working

@manueljurado1604 2 года назад

10 milímetros?

@TargaWheels 8 лет назад

Is the current-limiting circuit the reason these LED's get hot?

@dial2fast 8 лет назад

+TargaWheels The heat is simply from the light emitting diode itself. All high power LED will produce a lot of heat.

@marcquirante2383 11 месяцев назад

Do i need fuse when i install only pair of this led?

@dial2fast 11 месяцев назад

You should fuse all accessories you install.

@marcquirante2383 11 месяцев назад

@@dial2fast man i have only 12v battery vehicle 🥲😅

@imrankhan-km7fn 6 лет назад

Can i do the same with 10w eagle eye led?

@mikejonsson7235 7 лет назад

It's not in line.

@blkfxbb327 3 года назад

Are these bright as a usual DTRL or brighter would you say?

@dial2fast 3 года назад

I think these are just as bright as factory drl.

@blkfxbb327 3 года назад

@@dial2fast thank you for response I picked up same ones in link can wait to try them out

@that_crankytf9571 2 года назад

How did these hold up after 7 years?

@dial2fast 2 года назад

They held up fine for many years until I sold my car.

@that_crankytf9571 2 года назад

@@dial2fast Would you buy more

@ctrus 9 лет назад

What about the cables ?? Where did u connect them ?

@dial2fast 9 лет назад

Connected them to my DRL controller module which was installed in another video. If you watching this vid on a computer, you will see the link at the end of the video.

@onassislegaspi2547 8 лет назад

does the light aluminum housing won't melt the plastic?

@dial2fast 8 лет назад

+Onassis Legaspi No it won't melt plastic.

@youran1312 9 лет назад

Driver side is crooked

@jamesmoore5308 8 лет назад

is the red + and black - ? as tried to put on a switch from battery and kept blowing a fuse

@andrew21030 7 лет назад

It most likely will be. If you disconnect your battery it might stop the current surge which is what blows the fuse

@djdallas2144 9 лет назад

What size drill bit did you use to make the correct hole ?

@dial2fast 9 лет назад

Sorry, I don't remember, I just put a bit next to the threaded part and got one that is slightly bigger. It's ok for the hole to be a bit bigger because the nut will hold it in its place.

@12vgs8606 9 лет назад

Are these brighter than the one you replaced?

@dial2fast 9 лет назад

Yes they are brighter.

@MrRamkulov 5 лет назад

Did you use a LED driver to power them? Are they still alive?

@dial2fast 5 лет назад

No, just connect 12v to it.

@sbomorse 8 лет назад

I used these LED's a d they all ended up filling with water and breaking unfortunately

@Pro1er 8 лет назад

+Samuel Brooks I've given up on the Chinese DRLs, all of the different ones I've bought have failed due to water ingress. Maybe if you live in a dry climate they might be OK.

@dougrussell2102 9 лет назад

Are they hooked up to 12v or are u using a resistor?

@dial2fast 9 лет назад

Each LED has a current limiting circuit built in, so you don't need to do anything but to supply 12v.

@tunggulaji9028 4 года назад

I think need. Minimum you can use Dioda In4001-4007 so the LED will not too hot. Just warm. If you add resistor panasonic 47 ohm so the LED will very very cool and still bright.

@noelkennedy1769 6 лет назад

Were you satisfied with the light out of these?

@dial2fast 6 лет назад

+No Ke Yes, they are good

@fonzireyes 8 лет назад

have you had to replace any of the LEDs since the installation?

@dial2fast 8 лет назад

+Alfonso Reyes All still working like new.

@detailsdetails4146 8 лет назад

I have had to replace 2 of these myself. One water had gotten in and the other quit working.

@sttm1283 6 лет назад

link to the high strenght 3m tape?

@sd33zy313 6 лет назад

Make me some cor those fucked up headlamps for my cv yall sold me

@Mentorcase 9 лет назад

Do they turn off when you turn on the headlights?

@dial2fast 9 лет назад

It all depends on how you hook them up. Mine are connected to a DRL controller module which will dim the DRL once the headlight turns on. They will go back to full brightness with headlight off. Also turn off when the ignition is off.

@johnchristianguilang663 5 лет назад

Did you put relay on it?

@arturracer1166 5 лет назад

I have used the cheapest drl module I could find on eBay and it works fine. It has 3A fuse in it and even when you'll hook up 10 of these LEDs it will be still fine as they take like 100mAmp each.

@mattdeluca3445 6 лет назад

I say I don't know it's not you take until lights out to be see love Yours Nissan's to

@dougrussell2102 9 лет назад

Do they get hott?

@dial2fast 9 лет назад

They don't get hot, but do get warm.

@turkituom9432 5 лет назад

How it is after 4 Years ?:)

@tunggulaji9028 4 года назад

You must modify positif cable that led. It will be long life

@bennylozano7485 7 лет назад

how much and where can i order Eagle Eye

@dial2fast 7 лет назад

I bought them on Ebay several years back.

@madalinl123 6 лет назад

Aliexpres

@g8infosec 9 лет назад

L@@KS Great... Waterproof? Shock or rock-proof? Stan

@dial2fast 9 лет назад

Stan, LED are pretty much water and shock proof. The only thing is with these LED getting brighter and brighter, they also are getting much hotter so they need to have sufficient cooling.