300 Win Mag GL10 LA, Great Lakes Firearms at Rocky Mountain Range Day 

Facts, I wanted one but I'm not paying 3-4k+ for a 300 win mag build

I paid more for my RPR in .300wm. I doubt this Ar would be as accurate but I could do a lot with this rifle I can’t do with my RPR, like carry it and shoot or tactical it out. I would lighten it up first to get it as low as humanly possible.

@naturalbornkillr I want a 300wm but I'd want something smaller in size wise this things huge

@@MartellOutdoors I got a Noreen .300 WM with a 16" barrel. Very compact.

@@Beltfedshooters price?

any issues with it?

How's the accuracy

@@goneblown2 have had a chance to get out past 150yds with it yet, but at that range, it does a 3” or less group with Fedral ammo. Not “cheap” but not necessarily the good stuff either.

@@goneblown2 still breaking too.

@@goneblown2 also from a crappy rest.

I’ll see they’ll send me one or loan me one

I've got one. Definitely MOA. Idk how to post a pic on RU-vid .

@@justonsteele2284 How about at 300

Just sent an email recently. They responded today saying they will be selling spare parts in a couple of months. ✌️

Yeah I got one in 6.5 prc and the mags are $90

Awesome!! Thanks for watching and if you like our content please subscribe to help let RU-vid know it’s valuable

Any special requests let me know 👍👍

Have you sold any? Have you gotten any feedback? I've been checking these out.

@@Actheman1978I’ve got the 300 win mag and the 30-06 both are great but the mags absolutely suck

I have one too. The magazine is heavy duty to say the least. Easy to load. Heavy. But it works. Which is what you want.

Awesome! I want want …

Are you still satisfied with it?

Probably just as many as any other gun that’s running the cartridge for thousands of rounds

Very specific! Thanks. Have you spent a lot of time with this firearm? I have not. Just this short range experience.

Awesome! I want one as well

Did you get it? What do you think? I’ve been looking at this, a BAR and a BRX1. I’d prefer this one due to price and capacity.

@@Oillife-kk2yb look forward to hearing how it runs!

Wow. That sucks

@@neilhammers8711 I wish. I cannot get them to reply to my emails to do full review on this.

I’ve never used this other than at this range day. I would personally prefer a bolt action at the distances you are looking to hunt

I’ve never met the guys from NEMO and I go to 4-6 industry range days a year. Maybe someday

@@tylerwolfley2689 already been done by DRD a while ago, they are closed down now. I would expect to see .338 Norma from everyone now. Ohio Ordnance is making some firepower in that “Reapr”

Buffer tube, Lower parts kit, 5/8 X24 threaded barrel, Charging handle Latch, Buffer spring and gas block. BCG is not. However I believe the cam pin is like a standard 308.

I don’t know

It’s a magazine not a “clip” I haven’t got to get my hands on for an actual review but do value the feedback until I do get to review one properly.

Sorry for that. Just very disappointed with the rifle. There is allot of issuses with this rifle other things i didnt mention. I ve built allot of ar15 and ar 10. Never had these issues with any ive built.​@@MudLakeRanch

I don’t own one yet. I’m hoping they send me a loaner to do a more up close video for y’all

Yes I like mine. Especially for the price. Hardly any play between upper and lower. Changed trigger. Trigger pins fit perfect in the lower. No wiggle. (So many entry level AR rifles are out of spec.) Pins shouldn’t just slip in. M-lok cuts in hand guard are also tight. The magpul rail literally snaps lightly in place. Literally no movement back and forth. Hand guard has no sharp edges. Now the upper receiver had sharp edges inside. And the blocks the take down pins slide through. Not much paint on the inside of the upper receiver. So four hundred grit sand paper. Didn’t take but a few minutes to knock the edges down. Stainless buffer spring and nickel plated buffer. Nitrided bolt carrier. Only thing I didn’t like was the firing pin is held in place by a roll pin you have to punch out. After I break it in I will be installing a POF roller cam pin. It looks like a standard 308 size. I did email. But the representative reply they thought it was. I always shoot a hundred rounds to let the stock cam pin break in. So often you will see wear marks. That way I’m less likely to scuff up the new one. Took the muzzle break off to inspect the crown and to see the rifling. Looked great. I also prefer a break that doesn’t have holes on the bottom. Went with a LMT four chamber break. The charging handle itself is long. And only theirs will fit. But I did which out the latch to an extended latch from Strike Industries. Gun is test fired from the factory. I Noticed the buffer had three marks from the retaining pin hitting it. So I have a Galloway Precision off set pin on the way to fix that. I did notice the rear take down pin didn’t have that positive click when I pushed it all the way in. I thought it had a weak spring. Took it apart. The spring was fine. But when I tilted it back to have the plugger fall out. A small roll pin fell out. Yeah it’s the same size as a plugger. But it isn’t pointed on the end. I happen to have a spare. So all is good now. The charging handle latch roll pin was too long. It was digging into the receiver. So tapped it out just enough to use a dremal to grind it down a few thousands. I went through the whole rifle. And everything was tight. Had to go with a Luth PRS stock. Because I had to be able to move the cheek riser back to clear the extra long charging handle. Also you can’t use a Ambi safety selector. One side of the receiver has a ridge hanging over the top. Hard to explain. But clearance issues because the receiver is beefed up on that side. Magazine is made out of thick aluminum. Feels heavy duty. After dreaming about other 300 Winchester Magnum AR rifles. This one is great because it is affordable. And I can upgrade it the way I want. Built a few LR308’s over the years. If they spent a little more time on deburring the receivers. I think they could definitely charge more. I am not a gunsmith. But was a certified car mechanic. Owned a bicycle shop for over fifteen years. So have a mechanical back ground. If you want to learn about AR rifles. Watch School of the American Rifle. Sorry for the long posting. But I hope that it might help someone else figure out if this might be a good rifle for them.

@@p47rr thanks for commenting! Very helpful

@@p47rr thank you for commenting

Installed a POF roller pin cam. It is really smooth now. Also l normally use a light grease in my AR10s and AR15s. However with this rifle it burns it off fast. So now I use Mobile one synthetic grease. Same thing I use on my AKs and Garand. Coat the BCG rails.

@@YourState-pq4zs I only shot this one this one time on a video. No issues that day

Yes it jam. I got the 270 win, I like the look of it but shooting wise not really. Their bolt carrier is 💩

For the price I'm only griping at the five rounds. It'd not bad.

@@andrewlaughbon9468 100 bucks a mag

300 win mag is a fat cartridge. Unless you totally redesign the lower, single stack is your only option. My 450 bushmaster and 458 socom are both single stack. I would rather have a 5 round mag because that makes it legal to hunt with, at least in my state.

@@glennogborn4692 you Trumptards love eating shit sandwiches. Double stack magazines or go home.

@@glennogborn4692 ahh yes making excuses for bad products, love the far rights excuse machine