Thanks Dan! I want to do a set of FUEL 22x12 wheels with 35 x12.5R22's. The wheel has a -44 offset so it will stick out giving more clearance but my 2015 RAM already sits kinda higher. I was thinking a 2" front leveling kit for reassurance and my buddy breaks my balls about the rake. I actually like the hotrod look with the front sitting a little lower than the rear.
Looks good.. but what happens when your off road and turn the truck on bumpy terrain?. Does the tire rub then? I would think that the distance inside the wheel well must be affected.
A leveling kit is NOT stock! It’s a suspension modification. It’s still a lift! Put is in a sharp dicline off road rough terrain while in full turn... in other words, use the full travel.. not just a bump. They will rub. .. even if less than full travel clears body & frame? It won’t take much to rub front plastic wheel wells. If you want 33x12.5 - 13.5, or more? You’d do well to get a quality suspension lift.
He said the levelling kit will be in, in a week. Currently stock ride height. I've done 35's on a stock Ram myself. Sure it will probably hit on heavy off-road but daily driven its no problem.
@@--emt so my hemi was anything but sluggish it was 8speed 3.21 gears that thing turned 37s no complaints I ended up actually lifted 6 inches on super lift with no issues besides manifold cracks that where covered under warranty.........I ended up about 3 months ago getting 25k trade in on 21 Titan pro4x
@@jshapiro34 thanks for the Insight bud ...I have a 2017 big horn 5.7 Hemi with 3.92 gears 25000 miles on it I didn't want to overwork all my components , brakes suspension etc and make it really work hard to get going and stopping . for example my stock SRAs are 40 lb each I ended up going with the same size stock tires 275 60 20 but mud terrains at 58 lb each.( +18 per side ) I main concern was how much unsprung weight am I going to be moving and how much my truck is going to need to work obviously affecting ride quality I don't care about miles-per-gallon hit What do you think about my setup what are you recommend I have stock suspension didn't put any level on it just wanted a nice aggressive stock look
@@--emt I did have powerstop brakes and loved them but I also over tow I towed regular 7500-8200 lbs which was over weight for the ram I was originally on stock parts running nitto terra grapplers g2s 35x11.5x20 on 20x10 vision arcs and it still saw 16 mpg all day.
@@jshapiro34 I haven't put my tires on yet do you think I should be fine with the 3.92 and the 5.7 should be more than enough to move that around right? I don't tow.
Hey, how does the truck drive with the 10 wides and tires? i had 20x12's on my 3rd gen cummins and hated the way it made the truck drive. it made it always wander and bump steer. either way im looking into a similar set up for my 2012 1500
Hey bud quick question, so I have the 2017 ram sport night edition, I've found the wheels I like they are the ballistic rage but the smallest offset the have is like -19, for the tires I want to run 34sx11.5-12 depending on what fits, but I dont really want my tires like sticking way the hell out of the wheel well you mention you had a -24 on your you think with what I want to run it will stick out alot ?
Hey man nice truck. Good luck with the spacer kit. I installed a 3" in front and a 2" in rear spacer kit and it vibrated my truck so bad. With the 35" tires. I had the tires balanced over and over till I said fuck it. Got a 6" lift kit and new wheels lol. Hope you don't have my luck. Like to see it after your done and hear your thoughts.
WOW .. THANK YOU for posting this! 35 x ? 12.5? were your trucks 2x4 or 4x4. I've heard it makes a difference.... No level right? No Cutting? Never rubs? hard brakes? speed bumps? reversing? Do you think the more negative offset -24 is the reason why? I was here to confirm 33x12.5 on the same rim but 2x4 2012 would not rub .. Offsets told me I would likely need to cut or mold my well liners.
oh wait... you removed the fender well skirt liners? you put them back on? anybody know implication of leaving them off? Anybody running without them? I'm thinking of this setup but 33x12.5 and use a heatgun and softball to re-mold and pull the fender well shirt liners where it rubs.
Hey boss how you doing I’m sorry for bothering you I wanted to know I’m getting a 2018 ram hemi nothing special I’m just wondering with my 35x12.50x17 Toyo tires fit with out a leveling kit
Hello nice truck... Do you have a full view picture of the truck from the side? Would like to see the wheel gap on the truck and see how good the truck looks from afar....
I have 20 inch Rhino rims on my 2003 ram 1500 4x4 what’s the biggest tire I can put on my wheels without lifting my truck or rubbing? Please help me...
I have a 2020 Ram Warlock. Will be installing a leveling kit. Which in total should give it more then enough clearance from what I have read on forums. Leveling kit is coming soon. And 35x12.5r20 will be going on stockers for now.
Why so set on 35s ? I'm running a 275/65/20 tire( Toyo Open Country ATII Extreme) and it fills the wheel wells nicely and gives a bit of lift over stock as well. No rubbing issues.
Anyone know if the emissions and safety inspection will fail you for the tires sticking out like that? In my state of MA they are getting so bad they are now making the techs wear body cams to video your inspection along with 3-5 video cams on the inspection bay. I’m not kidding. They are going after bad inspection places but also getting on people for tinted windows, exhaust, tire and wheel mods, lowered, raised....I feel if I fart I will fail my poor cars during the inspection. Wtf is happening these days?
pingpang won I’m running 35/12.5r20 -44 on my 2015 Ram 1500 with a 3” leveling kit I can provide more information if you’re interested I’m gonna post a video in the next days
@@danielbusby6294 thats what we wanna know!!! Right there. I am building up a warlock for overland use. And I just needed the goods on whether I can offroad those tires. (2020 Ram Warlock)
@@danielbusby6294 mine fell off with radial tires on while off roading few months ago. Bought 33 inch mud claw extreme tires and took them to mechanic he threw em on my truck while doing so he said you know the drive's side front fender liner is missing I said to him yeah I know it fell out didn't tell him why 😆
Anybody know what a good clean setup would be For a 2015 ram 1500 2wd? With negative offset ,no rub?(with stock suspension) Ive been doing my research but man,its tough finding a good answer.
My ram has that same ticking noise. Do you know what causes that? Mines a 2012 I’ve had it since January 2017 and it made the noise ever since I bought it
It ticks due to a broken stud on the passenger exhaust manifold they say all hemis do it mine does it if you feel the studs on the passenger side exhaust manifold i garantee one is broken
I'm doing the same, does anyone know with the negative 24 offset, if you need spacers? And with a 2-3" leveling kit, will that put maximum pressure on the ball joints, causing them to break?
Daniel Busby good to know. I switched my 33" toyo R20 tires onto a fuel rim with a negative 20 offset and added a leveling kit to the front. I'm satisfied with the look and won't bother with the 35" tires.
No rubbing on level ground if the wheels are turned and you hit just the right bump I bet they rub too close for me might be ok if your truck is a pavement queen
Please.....This thing would rub hitting a crack in the road on a turn. Absolutely useless even on a dirt road, just spend the money on a decent lift brother!
I have a 2015 ecodiesel and want to keep the stock rims but go to 35s. Do you think it would work fine? I was planning on putting in a slight spacer. By the way I have the black forest green and love it. Looks amazing when it’s clean and waxed. Never stop getting compliments on it.