350Z - Replacing the Passenger Door Handle on a 350Z Episode 17

Подписаться 11 тыс.

Просмотров 25 тыс.

50% 1

What's up guys, this video goes over replacing the passenger exterior door handle. A pretty common issue among z owners, if you have any questions feel free to leave them in the comment section. I'd be glad to hear some feedback from you guys. Hopefully, I'll be doing the Coilovers soon! See you guys later
Like+Sub
Instagram - @justdriftcharlie (brand new Instagram)
Facebook - / jusdrift.cha. .
I am not ASE certified, everything I do, I'm doing and learning at the same time. Instead of hiring people to do work for me I simply attempt to do it myself and most of the time it works out. I am not responsible for any damage, or personal injury that may occur from working on your own vehicles. This is solely for entertainment purposes.
Music: Classic, by Joakim Karud
joakimkarud.ba...

Опубликовано:

11 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 48

@fredwyatt9722 2 года назад

I watched your video before replacing the passenger door handle on my 350Z. The trick using a paper tube to prevent dropping the bolts inside the door was so useful. Replacement took 15 minutes. Thanks for all the tips !!!

@dirtyboys350z2 3 года назад

Dude your the best every problem I’ve ever had with my 350 You’ve had a video on it

@fullthrottleperformance 3 года назад

Awesome bro! 💯 glad I could help you out

@DJ_Jazzy_XRP 5 лет назад

Yo yo, I’m glad at the end you stated how much time it actually took to do so the job minus filming, the shop quoted my mom 768$ to to both doors. 8/20/19, not going to pay that!!! Thanks for the video! You saved me $700 dollars!!!!

@fullthrottleperformance 4 года назад

Awesome, glad I could help you out!

@gn5983 3 года назад

Thank you so much for putting this video up, your video made it so easy to follow on how to replace the door handle. I did it all by myself, feels awesome to accomplish this task. Thank you!

@dbnarizona Год назад

Great video! I replaced my latch but neglected to slide down the rubber piece in place and this causes the latch to work very hard. Be sure to slide latch down and seat it properly to avoid this issue. Just FYI!

@clue232 6 лет назад

Could not have liked this video more! Thanks man!

@stevenking9357 5 лет назад

Thanks for the info, just bought a Z with both of them broken. First on the list of minor items to fix.

@fullthrottleperformance 5 лет назад

These are always broken lol

@HollowSnakes 4 года назад

wish i checked this before i did driver side i dropped the bottom one lolol i'll make sure to do it like this for passenger today lol

@cfauvel 5 лет назад

the paper guide is a great idea

@fullthrottleperformance 5 лет назад

Thanks man!

@Adamsonestopfishshop 3 года назад

@@fullthrottleperformance I used a Coin roll for dimes worked perfect and was strong!

@eugenerelyea Год назад

Right on Cuck good job

@RetroComandante 3 года назад

excellent video!

@diegopadilla8206 4 года назад

Easy fix ! Thanks bro !

@officeroinker440 4 года назад

Nice! Thanks bro. My passenger side just broke :/

@fullthrottleperformance 4 года назад

That sucks! But glad I could help!

@thomasquarantello9040 2 года назад

My 2007 convertible has one grommet for the bottom bolt. The top has a guide piece that is held down by 3 bolts and slides into a hole on the jamb. Is this what needs to be removed to get to the top bolt?

@josephbeavers4714 2 года назад

Mine just came up same issue 2 weeks ago. I am hoping the Chilton manuel has something reference the adjustment fix for convertible.

@nick25077ny 11 месяцев назад

Same here. Did you ever find out?

@YippydaSnoop Год назад

I have the convertible do I have to pull out that little Spike thing

@cosmicmeow4288 5 лет назад

what if the blue mechanism is broken on the inside? any idea what that is called? is where the metal wire latches down into a blue part :[?

@fullthrottleperformance 5 лет назад

Are you talking about the blue tab inside of the door? That's the door lock actuator. Did you get it fixed?

@king40310 4 года назад

Full Throttle hey bro how do you fix that blue tab I don’t want to replace the whole device

@johndinh2132 2 месяца назад

Thanks for the video. Do you have the link to purchase the door handle?

@fullthrottleperformance 2 месяца назад

You can get an OEM new one on Nissanpartsdeal.com or in this case I found one from Quirk parts on eBay

@johndinh2132 2 месяца назад

Thank You.

@fullthrottleperformance 2 месяца назад

@johndinh2132 no problem brotha 🤙

@1957Kato 3 года назад

Hi, I just have a question, I want to swab an automatic transmission from 2003 or 2005 350z nissan to mine 2004 350z, is it a swab and go or I'm going to do anything else?

@urielgonzalez3547 3 года назад

Thanks

@zackfiedler4593 9 месяцев назад

Didn't show us anything

@linkiller7625 3 года назад

what is that peace called?

@anff 2 года назад

What happens if you do that but you doors don’t open from the inside or out?

@baytex_5135 Год назад

trunk

@IsahDaPlya Год назад

what did you do

@anff Год назад

@@IsahDaPlya hi Mate, by chance i ripped of the top trim piece which sits on top of the door on the outside. once that is off you can use some sort of stick to put down the gap and push down on the lever which will open the door. i brought a new trim piece from japan to replace the one i pulled off after i fixed the locks . Better than cutting the door open lol

@IsahDaPlya Год назад

@@anff Dang, so it happend to me twice. first time i yanked on it and it didn’t work so i had the idea to open it from the inside and the outside and pull and it worked, then after it did the same thing but the lock was stuck and wouldn’t unlock and after a full day of my door not opening i showed it to my cousin and he litearlly pushed the lock to the unlock position with his finger somehow and got it open

@davetaylor2449 Год назад

What about 2007 model ?

@fullthrottleperformance Год назад

Same thing

@johnvang759 6 лет назад

What site u order from

@fullthrottleperformance 6 лет назад

john Vang I got it from a parts car, but on eBay you can order one from Quirk Parts OEM and good service fast shipping. That's where I got my driver's side from.

@crazycat350z 6 лет назад

buy new for 53.00 dollars

@fullthrottleperformance 6 лет назад

I didn't need to buy it new. But if I needed to I would have. I just had this off a parts car I had

@nuggetpiece 4 года назад

Woah woah woah, bro, get a drill, and metric bits... save yourself some stress

@fullthrottleperformance 4 года назад

The only reason I used a socket wrench, and paper/etc. was to eliminate the possiblility of the 10mm falling into the door. If that happened I'd have to dis-assemble the door to take the bolt out (because the bolt will rattle inside the door under normal conditions). If this was a customer vehicle, I'd do the same even though I have thousands of dollars in cord-less impact guns, wrenches, and anything you can think of. When you do the job about 50-100 times, you learn the fastest, and most effective way to get a job done

@nuggetpiece 4 года назад

@@fullthrottleperformance Yeah, I said metric, and I meant "magnetic" my bad.