here is a video of 2.4" pulley on a gen v m90. full mod list: l32 swapped car 1999gtp , with northstar TB, lq4 MAF, Gen 5 M90 supercharger on 2.4" pulley with 8 rib belt conversion to help reduce belt slip, 1.9 ratio rocker arms 105# valve springs, on stock cam, ported LIM, Stock heads, front and rear powerlog exhaust manifolds, 3" downpipe, 3" catless catback, waterpump and alternator underdrive pulleys zzp full stack 2.5 intercooler, running through a frozen boost dual pass H/E then a zzp single front mount heat exchanger, 10gal/min RV waterpump. Self made fuel pump rewire and Racetronix 380 fuel pump, hp tuned on e85 by me 60# injectors, and zex nitrous kit(125shot) 250 amp alternator.. Trans upgrades are all Triple edge performance parts.(some zzp parts) Trans Kit with Borg Warner frictions,Sonnax Oversized Billet 3rd clutch apply piston kit, 2 Oversized 2nd steel plates Stage 3 Upgraded valve body.New PCS, TCC, Shift solenoids, Pressure switch manifold,Sonnax Performance ratio boost valve and sleeve kit with matching pressure regulator spring, Sonnax oversized torque signal valve, Sonnax TCC apply valve, Sonnax TCC regulated apply valve,Side cover gasket, US made filter, Transgo SK 4T65E shift kit, Sonnax TCC relief valve, New Valve Body Spacer plate, modified Bushing kitThrust, Washer kitNew 4th clutch hub and shaft with heat treated splines,Stator support bearing, Input drum to sun gear bearing, Lube dam Forward apply band High Energy, 2-1 Coast band, High Energy, Reconditioned Input clutch apply piston, 7/8" chain with 2.93 gears(zzp), aluminium tranny pan(zzp), 300m input shaft(zzp), 245mm 2500 stall converter(zzp). Poly trans mount, poly motor mounts, poly dog bone mounts, shorter dog bones, cross drilled sotted rotors, poly sway bar bushings, 255 50 16 Toyo proxy r888
21 окт 2024
