3D Digital LED Clock Setting Guide 

FOR PEOPLE WHO WANT WHAT THIS VIDEO DIDNT OFFER+ WANT IT QUICKER the temperature is automatically on loop, if you want it to just display hour, click the UP button and choose DP-2 and you should be good, also if your clock turns off after you set it up; click on SET, then click the DOWN button and turn power saving mode off, it should say " - SD") overall i really like this clock!

Отличные часы, очень нравятся, размеры цифр 8х23 см, на расстоянии 4 м прекрасно смотрятся. Единственный минус, что даже при ночном понижении света индикации с 19 до 6 утра очень ярко светят и если кому не нужен такой раздражающий ночник, то можно легко доработать. Откручиваете сзади четыре крест винта и два под наклейкой на передней панели, вырезаете из цветной бумаги по контуру цифр прокладку фильтр. От плотности бумаги будет уменьшение свечение цифр. Я выбрал желтую бумагу, получилось мягкое теплое солнечное свечение, закрасил маркером мигающие секундные точки. Инструкция сложная, но можно настроить под себя. Часы у меня светят постоянно без авто выключения, отключил дату и температуру, будильники, это мне ночью, когда просыпаешься абсолютно не нужно. Повесил над телевизором, не сбиваются когда пропадает электричество, кабель питания достаточно длинный, но можно подключить простейший удлинитель USB, в общем получилось супер. Всем добра и тепла

Some folks are looking how to stop the blinking of the "colon" . I have a different remote which has directional arrows and no numbers. For me, the instructions said to press/hold down the arrow button pointing to the right. What I did was selected the clock option, clicked the clock option to go thru all the setting options (Time>Date>Year>Time), then hold down the arrow button to pointing to the right. Hope this helps

The temperature is reading way higher than it should do! That's the only let down with this clock.

Why do they give battery if its not running on battery?

how do u turn off the two flashing dots or set it so that they stop flashing?

Hi i don’t understand how do we set up the alarm please help me

To lower the brightness just press/hold the down button

Do you have to set the temperature yourself or is it being done by itself? It’s not letting me change the setting and I only see Celsius not Fahrenheit

is there a way of turning off the clock and not having to set it up again??

This material serves as a key to new realms of thought. A book I read with akin topics was influential in my personal development. "The Art of Meaningful Relationships in the 21st Century" by Leo Flint

Thank you so much love for helping me 💓

How to turn off the 2 blinking in the middle? I cant find them to turn off

My clock turns off after 5 seconds of not clicking buttons and no leds. How to fix it?

How do i take off alarms?? it keeps beeping at 12 at night

do you know how to turn off auto turning off? the clock activates when i move/touch it and after 10 seconds it turns off. sometimes it works properly. can you help?

how do you put an alarm? so that I can wake up without my parents getting mad lol

How do you make the column stop blinking?

You are so useful 👍

I can’t switch it to fahrenheit

Thank you brother this method is right

O que faz o botão down, sendo pressionado na tela inicial? Aparece - 5d ou oN 5D

How do I get some of the lights have dimmed or going out how can I fix that. Is there a battery that I can replace?

mine keeps turning off and only turns on when there’s movement or when it touched is that normal?

How to setup brightness

If i u plug it the time resets how do i turn it off to prevent electricity wastw

When i want to change the time its the temperature that comes up

whenever i give power , it restarts automatically plz tell how to fix it

How can i get rid of the buzzing sound?

Before mine was accidentally unplugged it would only display the time without switching to other screens which is what I want. Ever since I tried to set it up again I can’t get it to just display the time can you please help?

Dp 3 is not working on my

hi, how can i make my clock switch between screens? mine only displays the time

Hi, does anyone know how to do something with brightness? Mine are too shiny for me and i need just a little bit of light so it doesnt take any attention 😊

my clock becomes to default time when electric is off and then on, help me to prevent it please

Can u dim the lighting??

I own a similar unit, but after a long period of operation, the brightness level decreases. What is the solution?

Controller for what

it wont let me change the time can you help me? if i click the time button it changes me to 0:00 everytime:(

the two dots in the middle won’t stop lighting on and off on and off

i don’t know how to set mine bc no matter what button i press, it’s just switches between DP modes, so what do i do?

How to change the brightness

i can’t get into the setting mode after i’ve pushed down on set for 2 seconds, i’m not sure what i’m doing wrong

How do i make mine stay in « time » and not switch to any diffrent mode

How do I use the battery not the wire? Because I used batteries and it doesn’twork

Can this run without the cord

anyone know how to keep it on time only? mine flashes through time, temp, and date.. would love it to just show time

How to light up

how do i make it where i just see the time and not nothing else

Como faço para diminuir o brilho? Por que vi que tem 3 ajustes, mas não tô sabendo fazer

is it supposed to turn off after a couple seconds?

Is there a way to turn off the lights when its nighttime? I unplugged the cable when i went to sleep then i plugged again it went default settings again, my set time was reset?

How can i turn off the alarm?

How to increase the alarm volume?

How to change the light intensity? It dims like from 6pm - 6am but I want to change it. Like 6pm-8am. Can it be done?

where did you buy the clock from??

how do you make it dark?

Tyyy

How do i remove the battery cover

hi mine is not as migth birgth as urs idk why can anyone please help

how do i make it 12 hour time and not military time ?

Night me brightness down ho jati h Brightness ko high kaise rakhe 24 hours? Please reply

How do you change brightness

This led clock is good but the sound is so annoying I can’t even mute it without turning it off

It’s turned off until I touch it I’m going crazy here shitty time shift I mean it worked before

thx

mine keeps changing from time to temp to al, how do i make it to stay as time?

Czemu nie działa na bateri?

Can cycle between time and temperature only?

I didn't get the controller

how to leave the schedule stopped?

How do you turn AL light off?

how to change to 24 hour clock

How to turn it off?? Pls help 😢

hii mine keeps getting turning back off like seconds ba? naasar nako huhu

the clock is peeping sooo loud i can hear it from 1 meter away

Como consigo diminuir o brilho ?

q relógio complicado de mexer

How to remove the stand po?

I like this though, could replace my stupid broken ass Caixing wall clock.

Someone help me turn the alarm offffffff!!!!!!!!!!!

Mine stay 88:88 :(

too complicated for me to use. all I wanted was a clock~ the "instructions" brochure is so tiny that I can't even read it with a magnifier. and... a remote control??? for a clock??? ridiculous.

How to set time according to your country 😭 someone please help

how do you hang it on the wall?

Does it work with battery?

Where can I buy this in India

this is stupid it keeps freaking blinking on the time this is stupid i'm done and unplugging it and throwing it away i am done

দাম কতো টাকা আর কতো ইঞ্চি সাইজের

How to reduce brightness?

I dont understand how you set the time? For example its 16:06 for me but it shows 12:08 could you explain?

1:00:00

why tf is it so hard

bro this made no sense i dnt get it

25:00:00

battery ka ghapla krdiyaa

how do i remove the alarm

I dont have an outlet close enough to where I want to put it can I switch it to battery somehow?