3D Print in Place Hinge with Parametric Pin Modeled in Fusion 360 Tutorial

Подписаться 21 тыс.

Просмотров 35 тыс.

50% 1

How to 3d model a 3d print in place hinge in Fusion 360 with parametric modeling features. Includes a tolerance parameter that you can change based on the bridging and features of your 3D printer making this print in place hinge perfect for many projects.
Link to Fusion 360 File: drive.google.com/file/d/12KyR...
Link to STL File:
drive.google.com/file/d/1qrrT...
👍 Support on Patreon
/ whatmakeart
🟥 Subscribe
www.youtube.com/
Links
🌐 What? Make Art Online
whatmakeart.com/
👕🎽Looking for What? Make Art merch?
teespring.com/stores/what-mak...
📷 What? Make Art on Instagram:
/ whatmakeart
🐦 What? Make Art on Twitter:
/ whatmakeart
My Work:
🌐 www.jimmykuehnle.com/
▶️Videos:
/ jimmykuehnle
#fusion360 #3dmodeling #3dprinting

Наука

Опубликовано:

21 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 115

@FrankTank7777 Год назад

This video should get so many more views. I am new to Fusion 360 but not new to modelling. The idea of using parameters is fantastic. As a software dev by trade it makes so much sense to use parameters to drive the procedural model being created. And it is not just for adjusting tolerances, but it allows you to design one hinge/model to be resized to whatever future project one might have.

@WhatMakeArt Год назад

Exactly, using parameters in Fusion 360 is a great way to work, just like variables in code 👍

@sethkoster1 7 месяцев назад

This is the best fusion 360 tutorial I've come across. Has exactly what I need, including ways to update using variables, and gets it done in almost no time. Thanks! Subscribed.

@WhatMakeArt 7 месяцев назад

Glad it helped, hope your 3D print comes out well

@blackbarlow408 Год назад

Thank you for making a clear, concise video, showing an astounding amount of information in a short amount of time with no filler or bs. Fantastic video!!

@WhatMakeArt Год назад

Glad it was helpful 👍

@lorentziwood 4 месяца назад

Like others in the comment section, this is the best fusion 360 hinge tutorial i've seen.

@WhatMakeArt 4 месяца назад

Thanks, glad it helped 👍

@CitadelOfLukes 7 месяцев назад

Subbed, there is waaayyyyy more value in here then just hinge making! Thanks for making this!

@WhatMakeArt 7 месяцев назад

Glad it helped, hope your 3D print in place hinge project turns out well 👍

@pooppyybuhhole 5 месяцев назад

I’ve never used parameters on my model but can absolutely see how these could improve my workflow, especially with the tolerances since I’ve been manually entering them and hoping I remember them/don’t fat finger them 😅 Thanks for the video! Definitely a hidden gem of content right there.

@WhatMakeArt 5 месяцев назад

Glad it helped, for quick models. Sometimes parameters aren't worth it but just like everything with computers, having a variable can really save time when you need to change something

@pr0d1gyvisions74 2 месяца назад

Watched like 10 other tutorials that were x3 as long and learned nothing. This 6:38 taught me more than I could ever take in within that time. Thank you.

@WhatMakeArt 2 месяца назад

Glad it helped 👍

@jayhorowitz8154 2 года назад

Very helpful introduction to in place hinge and parametric modeling with fusion. I'm new to fusion and this was very much needed. Thanks for your kindness.

@WhatMakeArt 2 года назад

Glad it helped and I hope you are 3D print projects go well in Fusion

@Shabazza84 Год назад

Clear and to the point. Excellent!

@WhatMakeArt Год назад

👍

@bigjame26 26 дней назад

i think i would have just offset faces and called it a day. but thats the beauty of modeling, more than one way to get the results! nice work!

@WhatMakeArt 26 дней назад

Thanks for sharing another solution with everyone, yes, many ways to model

@SpencerYonce 6 месяцев назад

So much valuable information here!! I can’t thank you enough for such a brilliant video. The information covered was amazing and super helpful.

@WhatMakeArt 6 месяцев назад

Glad it helped 👍

@markcm 24 дня назад

WOW! I got so much more than I was hoping for out of your tuturial. Great job and thank you!

@WhatMakeArt 24 дня назад

Glad it helped 👍

@MoritzWeller 6 месяцев назад

I came for hinges, I stayed for the Fusion 360 knowledge - instant Sub. Amazing Tutorial!

@WhatMakeArt 6 месяцев назад

Glad it helped 👍

@notrslau Год назад

Extremely well presented! Thank you!

@WhatMakeArt Год назад

Hope your 3D printed printing place hinges come out well

@Lazy_Mango Год назад

Thank you for this. I've been using fusion for a couple of years now but I never went through any form of teaching so I didn't know about the user defined parameters. I've been manually putting entering the dimensions in all constraints.

@WhatMakeArt Год назад

Glad it was helpful, I'm constantly learning new things that I never knew about Fusion 360 as well 👍

@loubano Год назад

You are amazing !!!!!! Thank a lot for this great tutorial ❤️

@WhatMakeArt Год назад

👍

@tigercat123456 2 месяца назад

Great tutorial! Thanks for sharing & explaining the techniques on how to construct in Fusion so very well!

@WhatMakeArt 2 месяца назад

Hope your 3D print in place hinge turned out well

@tigercat123456 2 месяца назад

@@WhatMakeArt not yet, but just by watching this video I learned a whole lot of (new to me) construction techniques in Fusion, cant wait to try for myself ...

@anibalismo 9 месяцев назад

ppsssfffff. So much knowledge. You get me going in fusion farther than many paid courses could. Thanks for your time to share :)

@WhatMakeArt 9 месяцев назад

Glad it helped, post any questions 👍

@jorgealejandrotorresstoffe9035 6 месяцев назад

Fantastic tutorial! Thank you so much! You are a genius!

@WhatMakeArt 6 месяцев назад

Glad it helped 👍

@gauravnajpande5017 Год назад

fantastic tutorial, easy to understand

@WhatMakeArt Год назад

Glad it helped 👍

@alexroberts6542 2 года назад

Holy shit, I feel like I just took a 6 minute master class in fusion.

@WhatMakeArt 2 года назад

Glad is was helpful, happy modeling in Fusion 👍

@jamessundance6489 2 года назад

just what i was thinking. im new to 360 and I could do this hinge in the most inefficient and clunky way possible in about 2 or 3 hours of pulling my hair out. i feel like I need to go back and redo all my models now.

@kevCarrico Год назад

fantastic video - thank you!

@WhatMakeArt Год назад

Welcome 👍

@neetones Год назад

This is extremely good.

@WhatMakeArt Год назад

Glad it was helpful 👍

@justanotherproject2day Месяц назад

Great exercise!!

@WhatMakeArt Месяц назад

3D print in place hinges are wild

@purokogi Год назад

Thanks.. never got to try parameters but I can see using this often.

@WhatMakeArt Год назад

Yeah, parameters are super helpful in fusion 360 👍

@Dannyboyjr 11 месяцев назад

I thought I was getting good at fusion 360 until I saw this video. next level

@WhatMakeArt 11 месяцев назад

Just keep modeling in Fusion 360 and soon you will know even more than this video

@EskinDynamics 2 года назад

thank you for your video, and I printed myself on a 3d printer and posted the video)

@WhatMakeArt 2 года назад

Great 👍 happy 3d printing

@MeTuMaTHiCa Год назад

thanx so much i paused did what u did and its okay many thx

@WhatMakeArt Год назад

Glad it worked out

@iancharnas 2 года назад

Hi Friend! I was just watching various videos on this and suddenly I heard your voice! Haha great video, keep it up man!

@WhatMakeArt 2 года назад

Ha! Not quite rocket 🚀 skates 👍

@iancharnas 2 года назад

@@WhatMakeArt hehe. Question for you though - when you 3D print this, do you print using supports, and then just open and close the hinge a bunch until the supports disintegrate and fall out? Or how do you support the gap between the inner pin and the outer sleeve/bushing?

@WhatMakeArt 2 года назад

Cura tries to bridge it if you print without supports and turn on the experimental bridging in settings, Also printed it with supports and it is a bit crunchy but then moves fine, can also adjust the gap parameter in Fusion 360 based on real world prints

@iancharnas 2 года назад

@@WhatMakeArt very cool! I'm reading up on the bridging feature now. Thanks for the tip :-)

@renzovelezthe2 23 дня назад

6mins of godly tutorial

@WhatMakeArt 23 дня назад

Glad to hear it helped 👍

@JoshuaJoshua0 2 года назад

Nice!

@WhatMakeArt 2 года назад

👍

@Magic-Smoke 2 года назад

Unbelievable that only 583 people have seen this - very helpful. Thank you.

@WhatMakeArt 2 года назад

Glad it helped 👍

@Magic-Smoke 2 года назад

@@WhatMakeArt One tiny detail I didn't catch was how to export the 2 components so they print together?

@WhatMakeArt 2 года назад

Just select both of them and then go to file > 3D Print Then in the dialog box uncheck export to 3D printing utility Here is a video link showing how to export an STL from Fusion 360 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-I-ltiZdUFOA.html

@Magic-Smoke 2 года назад

@@WhatMakeArt Thx :)

@zero00tolerance 4 месяца назад

This is great but holy cow I only know the basic of Fusion this is too advance for me, I wonder if you have a separate video showing how to do Parameter step by step for newbies in Fusion

@WhatMakeArt 4 месяца назад

This shows how to add parameters to existing models in Fusion 360 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-sBEHI-N4DAY.html

@ChrisOndrovic 6 месяцев назад

Great video would this be the same method it the print orientation is changed so the pieces are printed flat on the bed?

@WhatMakeArt 6 месяцев назад

Yes, I printed this flat on the print bed

@ChrisOndrovic 6 месяцев назад

@@WhatMakeArt sorry might not have asked my question correctly. Will it work if you are not printing flat on the bed?

@justintupicruz6324 Месяц назад

Good shit.

@WhatMakeArt Месяц назад

🛻

@graphguy Год назад

Anyone think of the design modification to make the hinge a racheting style action? One that allows the hinge to stay in place wherever you open it to?

@WhatMakeArt Год назад

Great suggestion, would be an amazing interesting printing place 3D printing hinge design will put it on the list

@rayge 2 года назад

This is a really good tutorial do you have more on fusion 360?

@WhatMakeArt 2 года назад

Thanks, here is a Fusion 360 Tutorial playlist Fusion 360 Tutorials: ru-vid.com/group/PL8G4GiXpgTvLtq4P3ClYG9IC1Cyg-b84X

@rayge 2 года назад

@@WhatMakeArt thank you!

@phoebus00 2 года назад

Thank you for sharing. I’ve seen a few videos of print in place hinges, however I just can’t understand how the peach colored pin itself prints without any sort of support coming directly from the “bottom” floor of the gap? Basically what keeps the bridging pin material from slouching midway between the two endpoints? Also I have an SLA printer that obviously prints upside down, would this still work?

@WhatMakeArt 2 года назад

It's weird but it just kind of does. Every 3D printer is different and you should just try to print the print in place hinge for a few different settings and see how it turns out. It only takes a few minutes to print, you might be surprised

@phoebus00 2 года назад

@@WhatMakeArt Gotcha! TBH I’m kind of comforted to learn that it’s not just weird to me alone 😅. Thanks, I’ll def give it a shot if nothing but for the sake of my curiosity.

@airbulb Год назад

I'm also confused. I just got a printer and have not even set up up yet but if this is possible I'm amazed. Can't wait to try this. Thank you.

@WhatMakeArt Год назад

Yes, it seems weird but give it a go, it really works, post any successes or messups you have 👍

@airbulb Год назад

@@WhatMakeArt Set up my printer and immediately printed your hinge and of course it works. Amazing - thank you.

@somerandomvideos645 Месяц назад

I already subscribed for a Shapr3d, but seeing how much features it lacks compared to Fusion, I'm sad :( is there a way to print this horizontally and keep it movable?

@WhatMakeArt Месяц назад

Best way to find out is to try to print it horizontal and then make adjustments to it based on the results

@louis7541 5 месяцев назад

How does the pin print without touching the other part of the hinge? using bridging?

@WhatMakeArt 5 месяцев назад

It just goes really fast and that part doesn't fuse together, it is a little crunchy at first but then moves relatively freely

@CraftedLayers 3 месяца назад

Welp, I did it.... What I did I do not know.... But.... I did it. Thanks!

@WhatMakeArt 3 месяца назад

👍

@terrypatton1044 Год назад

is there any chance that you could help me with a wristwatch that I am making that will have a top that opens and closes so it will need a small hinge- I will pay for your time-

@WhatMakeArt Год назад

Email is on channel about page, send some details

@ohexra 11 месяцев назад

can i use this hinge in one of my own creations?

@WhatMakeArt 11 месяцев назад

Yes, you can use the print in place hinge in whatever you want 👍

@bbrendon 8 месяцев назад

how do you print it? it's two bodies. Also, what about the joint?

@WhatMakeArt 8 месяцев назад

To 3D print the print in place hinge, just export both the bodies and don't add supports in your slicer and it will likely print fine

@Brickalistic1977 5 дней назад

Very helpful! (a bit fast though)

@WhatMakeArt 5 дней назад

Thanks for the feedback and glad it helped 👍

@Brickalistic1977 5 дней назад

Yeah thanks for the video! I’m gonna use this design in a project of mine

@user-fp9bc5sg7l 5 месяцев назад

требую перевод на русский

@WhatMakeArt 5 месяцев назад

Я не говорю по-русски, но вы можете попробовать Google Translate.

@ricyalol 10 месяцев назад

this could have been so much shorter and better but I guess its better than nothing, thanks

@WhatMakeArt 10 месяцев назад

Yes, always looking for ways to make information more compact and the delivery more efficient

@baaltheguy 7 месяцев назад

it contained a lot of details within 7 minutes, i donno what your problem is. haven't got 7 minutes to learn a couple of things? yes, it could have been short like, 'just do it', but then it wouldn't be teaching anything, would it?j