3d Print Vacuum Casting Part 1 | Building the vacuum casting machine for casting metal

Подписаться 2,9 тыс.

Просмотров 15 тыс.

50% 1

In this series I jump into the unknown to me world of 3d printed vacuum casting. In order to get started I had to do a bunch of research about how the process works (shown in the beginning) and then build the vacuum casting machine and de-gassing machine to be able to work with the plaster and later the metal. These machines retail for a lot of money and it seemed like a pretty simple thing to build - so I'm not sure what justifies the cost of them.....maybe I will find this out later.
Anywho enjoy the video, more coming soon....
Cheers,
Dmitri
0:00 - Intro
1:36 - Building the Vacuum Casting Machine
9:59 - First Tests

Наука

Опубликовано:

23 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 23

@Laotzsa Год назад

Way more aesthetically looking than most DIY vacuum casters

@wasiza6475 3 месяца назад

Great work man

@yakfish36 2 года назад

Fantastic job mate seriously good vac caster. Thanks for this.

@shokoladkas 2 года назад

Wow Dima, this is amazing and inspiring. Talented people are talented in many things :). Excited to see what will you make next!

@florencelibellule7224 2 года назад

Impressive! Well done!!

@laikadefcon8817 Год назад

Тоже хочу такие инструменты :') Спасибо за видео!

@noviceartisan 2 года назад

Hahaha, I ended up doing mine using the lathe... Mounted a drill bit in the chuck and pushed the chamber against the bit by hand till it was done. Might not be perfectly centre, but it worked. Drill presses be tiny when you add on the size vice you need to hold big stuff!

@dutchdb Год назад

"Don't judge me." I can commiserate with this every time I do a thing.

@octapc 10 месяцев назад

Is it a good idea to degass before pouring plaster and then again in the cast in case the cast has bubble traps?

@paulmanhart4481 Год назад

Very good work. I won’t say anything about your hand drilling though. Been there too many times. It would have been nice if you had given more explanations about the various steps. What 3D printer do you use? I noticed Formlabs on the screen but wasn’t sure if that was the printing material or printed. Formlabs has some investment casting PLA from what I hear. Expensive equipment though. Thanks, Paul

@joshuablanchette2836 Год назад

Where did you get the acrylic cylinder from? Can you post link please?

@DmitriIvanov Год назад

I'm in Germany, i got it from this shop here: www.plattenzuschnitt24.de/Plexiglas-Rohr-Zuschnitt/

@FatKidBrody 11 месяцев назад

A little coolant goes a long way.

@phillybpy 3 месяца назад

How much would you charge to make me one. I don’t have all the equipment you have

@admincvpag7120 Год назад

any possibility to post dimensions? hard to guess

@NeoQJ Год назад

Did the plexiglass tube still hold up now?

@DmitriIvanov Год назад

Yes, I've used it a bunch to degas epoxy and cast things since I've built it, no problem yet.

@thybigballs Год назад

I had to look up the strength of plexiglass. It may be better than a glass dome. This was something I found while searching: "Looking at the load-bearing capacity of acrylic, we can state that the weight required to break an acrylic sheet is about 30 times greater than a glass pane of the same thickness. Suppose a pane of glass 1 metre wide and 3 millimetres thick breaks at a weight of 1 kilo, then a three-millimetre thick acrylic sheet will break at a weight of 30 kilos. That is quite a difference. This is also the reason why acrylic is widely used in load-bearing and heavily loaded structures, such as showcases and aquariums."