3D-Printed Fillenium Malcon (Timelapse)

Подписаться 440

Просмотров 492 тыс.

50% 1

This is a Timelapse of my biggest print project so far on my own designed/built printer.
It's 500x170x700(mm) and weights 3 Kilograms of Filament.
▼ ▼ ▼▼ ▼▼ CHECK LINKS BELOW 4 PICS ▼ ▼ ▼ ▼ ▼ ▼
Hardware / Software:
Hotend: E3D6lite - e3d-online.com/
Extruder: BONDTECH QR - www.bondtech.se
Electronics: Arduino/Ramps 1.4
Stepperdriver: TMC2208 - www.watterott.com/
Slicer: Simplify3D - www.simplify3d.com/
Controlled: Raspberry Pi3 & Octoprint - www.raspberrypi.org/ / octoprint.org/
MORE PICS and Information about this print:
www.thingiverse.com/make:402264
CREDITS for the 3D-Model: (Andrew Askedall) aaskedall
www.thingiverse.com/thing:919475

Наука

Опубликовано:

5 ноя 2017

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 441

@stonefx83 6 лет назад

!!!!! This 3-D Printed, recreated Model of the original "Millennium Falcon" is due to possible Copyright Claims called *"FILLENIUM MALCON"* ! !!!!! Before you complain about the missing Pictures check them out on my Thingiverse MAKE of it. The link is in the Description!

@eldonstrackeii7892 6 лет назад

Kind of pointless to worry about Copyright when the image of the Falcon is Trademarked. trademarks.justia.com/758/79/millennium-75879489.html

@DirtyPlumbus 6 лет назад

How many days did it take?

@ender_slayer3 6 лет назад

can you please try a star destroyer?

@Shinzon23 6 лет назад

stonefx83 so how much did this cost to make in terms of materials? By this I mean how much did the polymer or what have you that is extruded cost?

@starrlynn2523 6 лет назад

How many times did you have to refill the printer to make that thing?

@rdc2724 6 лет назад

He started printing 9 days ago in a galaxy not to far away ............

@pdxminecraft 6 лет назад

I love how it looks like it just grows in place!

@twmijjit 6 лет назад

Now, only if 3D printing can get that fully printed before Han can finish his Kessel Run.

@TychoBrahe21 6 лет назад

Dude, those over hangs are sick! Thats a great print job!

@Enskakuski 5 лет назад

My thought exactly. I tried to slice a MF model for the CR-10S, but was never quite happy with the amount of support needed...

@joncvaldivia 6 лет назад

Can't imagine this video staying up that long with the Star Wars theme playing. Awesome print!

@stonefx83 6 лет назад

Hey don't worry it won't be deleted or muted. They letting me use the Music. Quote from the Video Information: "The claimant is allowing their content to be used in your RU-vid video. However, ads might appear on it."

@W.Keeling 6 лет назад

joncvaldivia ha that’s the first thing I thought off, great print though

@spec24 5 лет назад

Copyright owners have decided it's easier to earn money on your use of their content than it is to spend money going after each and every offender. Copyrights: one of the worst ideas in history.

@codygibson2809 3 года назад

@@spec24 Copyrights are necessary, people wouldn't create near as much if it could all just be ripped off immediately. The muddy rules around fair use however are awful.

@avengingeyes4041 6 лет назад

Fantastic job on the falcon finally someone who picked the right size the only problem now is all the fans are going to want one great job great detail thank you for sharing

@fooman2108 3 года назад

NINE DAYS that is a hell of faith in your printer! NICE JOB!

@DirtyPlumbus 6 лет назад

That's sick. Print quality looks really good too.

@cobra421 6 лет назад

This is awesome and it's so finely detailed

@matthewschaff 6 лет назад

this is amazing! great print.

@stonefx83 6 лет назад

thank you!

@mistytharpe3991 2 года назад

That was strangely satisfying to watch. I was under the impression that the 3D printers printed out components that you had to put together yourself. I did not realize they can print ships like that

@MrBudderTacoMBT 6 лет назад

Imagine this model on a laser sintering machine.. the beauty😍

@SuperiorEtchworx 6 лет назад

awesome job on that printer the surface looked pretty good

@gofar4 6 лет назад

Just like the ship past through from time travel slowly. Amazing..

@fernandosalas8589 6 лет назад

iam not a star wars fan, but great job on the printer, you should've shown the true size by holding it.

@stonefx83 6 лет назад

Thanks! I totally have to do that. I will add few more Pics to my Thingiverse make of it. The link is in the description.

@SgtPickledic 6 лет назад

size of a shoe box?

@stonefx83 6 лет назад

SgtPickledic Check description

@ChiefDork 6 лет назад

There’s a floor radiator next to the printer, and seeing how all floor radiators sit the same height under a window should tell you how big it is

@stonefx83 6 лет назад

I always thought to myself why poeple ask such questions....when you clearly see what you just described! ;)

@Crlarl 6 лет назад

"Don't worry! She'll hold together! Hear me, baby? _Hold together."_

@Michael-tm9ke 6 лет назад

Oh my god! It is Fillenium Malcon from Swar Tars!!!

@tomgray7049 6 лет назад

That was awesome to watch...

@generalleenknassknotretire9180 6 лет назад

As soon as it takes only 3 minutes to print one of these, I'm buying a 3D printer.

@comebackguy8892 3 года назад

@@dr.4609 r/woosh

@williambyrnes4198 3 года назад

@@bearleemadeit4718 Read the comment again! What I read is that he will get a 3d printer when printing something of this size will only take 3 minutes. His comment should have said, "When it only takes 3 minutes to print one of these, I'm buying a 3d printer."

@williambyrnes4198 3 года назад

@@bearleemadeit4718 I did get it.

@williambyrnes4198 3 года назад

@@bearleemadeit4718 Then goto bed.

@beerenmusli8220 6 лет назад

Wow, Taht looks awesome! It must have been a lot of work putting this into 3D files....It was worth it for sure!!

@stonefx83 6 лет назад

Thanks. But I am no the creator of the 3D-Model. I only designed and built the printer.

@adriancoleman2876 5 лет назад

I really liked seeing the day/night cycle on the timelapse for some reason 😂

@kururuhuang3829 6 лет назад

REALLY AMAZING!!!

@thobiex 6 лет назад

And then the print pops off at 87%

@stonefx83 6 лет назад

hehe sure that would be a nightmare, but when you plan a 200hours+ print you will be 100% sure this cant happen! ;) I even struggled to get it off the printbed after the print! it was like glued to the glass bed! ;)

@thobiex 6 лет назад

I know what you mean! Prints with a large surface area can sometimes be a nightmare to get off!

@stonefx83 6 лет назад

yap I already broke 2 glass plates xD

@stardude2006 6 лет назад

Awesome !!!!!!!

@BlackArroToons 2 года назад

That is cool. I can imagine it's heavy too. In the background, it looks like several days passed by or more to create this.

@rhysioeren3203 6 лет назад

Amazing!

@originaltonywilk 6 лет назад

Very nice printer you built there. Can only imagine the stress of waking up ... is it still printing? ... YES!!! for 10 days - sheesh :)

@stonefx83 6 лет назад

thanks! was exactly how you imagined :D

@lectersnightmare 6 лет назад

So satisfying

@chrismyers5029 6 лет назад

Pretty cool print. I wonder how tough it would be to slice off the turrets, and antennae? Print those separate so the would be moveable. 10 Days though. Wow. Also, what printer did you use? Filament type? Just curious. Looks awesome btw. The detail turned out fantastic.

@stonefx83 6 лет назад

Chris Myers Well would be possible with the right Tools. But even in a scale like that the those parts are very small. Specially the turrets. The Printer is my own designed/built machine. Using cheap silver PLA.

@nicholassagraves2086 6 лет назад

stonefx83 what brand pla might I ask?

@stonefx83 6 лет назад

Hey, I am using the "Best Value Filament" from my local 3D-Store here in Switzerland. I don't know what brand is behind the Product. It just says its produced in Europe on their site.

@nicholassagraves2086 6 лет назад

stonefx83 ok thanks for the response and the awesome video!

@dopetechlab9619 6 лет назад

Hallo stonefx83! Ich wohne auch in der Scheiz und benötige für meinen 3D Drucker auch genau dieses Filament! Was für ein Zufall xD

@lukashuettner 6 лет назад

The biggest problem now is - I want to have one

@ndrm469 6 лет назад

Straordinariamente grande, Complimenti :D

@stonefx83 6 лет назад

Grazie mille ;)

@thumper1uk 6 лет назад

Epic!!!!! love it

@PastaLuke 6 лет назад

What!? The print extends passed the print bed! It hangs beyond the build surface! What a feat!

@stonefx83 6 лет назад

When I build that Printer I had already some Spare Parts from my Main Printer. So I used them. I will attach a much bigger print bed soon ;)

@somnambulist7705 6 лет назад

Love Star Trek, looks amazing. One day we will laugh at the time it used to take to 3D print.

@stonefx83 6 лет назад

Yeah, who knows what future technologies will be capable of!!

@stardude2006 6 лет назад

Tort Uga Star Wars not Star Trek

@maxhammerum7705 6 лет назад

Nice! Somebody who actually uses different infills!!,!,

@OiDepp 6 лет назад

i would use this a lot of times, but im dont know how :D With CURA as slicer this is not an standard option it seems? i am new in printing ^^

@liamandrade5167 6 лет назад

This 3d printer is really impressive I'm jealous lol

@timhobson9284 6 лет назад

This is one of the greatest achievements of mankind

@Werbewunder 5 лет назад

Awesome.... really awesome!

@stonefx83 5 лет назад

danke;)

@Werbewunder 5 лет назад

Er spricht German, cool! Ne echt das ist hammer das Ding! Richtig klasse! 9 Tage ist ne laaaange Zeit :-) Wie haste das denn mit 1kg Rollen gelöst oder hast du auch einen Filament Extruder wie ich und kannst dir dann gleich mal 3Kg Filament machen und auf eine Rolle werfen?

@stonefx83 5 лет назад

@@Werbewunder habe das filament on the fly gewechselt. funzt sehr gut bei einem dual gear extruder ( bondtech qr) ☺

@d35p0 6 лет назад

Perfection doesn't exi-

@Shazzkid 6 лет назад

Hey that printed pretty smooth sides

@shaldurprime7154 6 лет назад

i like how you modeled the cabins interior

@stonefx83 6 лет назад

Shaldur prime Hey i did not created the 3D-Model of the Falcon(wad created by aaskedall). I only built the Printer.

@xxxxzorroxxxx 6 лет назад

What is the printer did you use and what is the time setting did you use do this

@stonefx83 6 лет назад

It's my own designed/built printer(There is a Link in the Description where you can find a pic of it on thingiverse). I guess by meaning "time setting" you mean the timelapse. Its done with Octoprint and takes on each Layer change 1 Pic!

@chrishorton444 6 лет назад

Awesome!

@PaladinCaddy 6 лет назад

I would have liked to have seen something for scale.

@stonefx83 6 лет назад

+Paladin Maaaybeee there is something in the Description!

@monsterjamrobloxtours1624 5 лет назад

I'm not sure what took longer, printing it out or making it in the program

@stonefx83 5 лет назад

Ohh Yeahh Yeahh

@ParsMaker 3 года назад

wow this huge , how many hour took to get done

@carltrotter7622 6 лет назад

I am currently slicing a model of the USS Voyager that will be over 1.7M in length when assembled

@innovatecksoftware 3 года назад

hola, donde puedo comprar esa impresora?

@cinnamonzombiez510 3 года назад

i watched this while playing the gmod ragdoll noise and its the best

@cyberpred 6 лет назад

Well Done

@petertomkins1204 Год назад

brilliant i want one

@JensChrBrynildsen 6 лет назад

Great print! Please make a short vid showcasing the full size of it also? 70cm is really big! :-)

@stonefx83 6 лет назад

Jens Chr Brynildsen Thanks. Check the description. There is a link to the thingiverse make of it. Where you can see some pics.

@chrisstedham6672 6 лет назад

Okay that was cool but is there any way to make the the the dish and the guns move ?

@stonefx83 6 лет назад

of course, editing the 3d model and cut them into separated parts and create some joints with bearings and a motor it would be easy to do so.

@ts_inventorh6430 6 лет назад

do you what layer is this? not looks for layer!

@g.s.3389 6 лет назад

wow wow wow wow nothing else to add :)

@greenvill4527 3 года назад

와....존경합니다...

@obiwanseile7230 6 лет назад

3D Printing is the Future!

@vctrsone 6 лет назад

The want is strong with this one.

@austinsjaarda2519 6 лет назад

What was the layer thickness that you used just curious

@stonefx83 6 лет назад

Austin Sjaarda 0.15mm

@charliemillhollin4471 6 лет назад

How did you get your printer to print wider than the build plate after it started? Really cool video btw great job!

@stonefx83 6 лет назад

Charlie Millhollin Hey thanks! Basicly you just set a bigger printbed in the firmware and in the slicer. Position the bed in the middle and in the slicer you take care your object starts on the bed.

@ktjarvgaming7002 6 лет назад

how long did it take to print

@VideoSage 6 лет назад

Am I going insane here, or does it not say the material type?

@stonefx83 6 лет назад

its pla there are more infos in the link to the make on Thingiverse of this project in the description

@nyalldavis 6 лет назад

How are you printing those overhangs with no deformation?

@stonefx83 6 лет назад

Having a very good Part Cooling FAN and printing @35mm/s. The most critical outer Perimeters have a Speed reduction of 50%! So around ~17mm/s.

@footerballer1 6 лет назад

Hi, fantastic job!! What is the extruder/ hot end you ending up using?

@stonefx83 6 лет назад

Hey, Thanks!! I am using a Genuine "E3DV6Lite" Hotend with an upgraded "E3D Volcano Heater block". The Extruder is a "Bondtech QR" (DualDriveGear). Using Bowden-Style.

@originaltrilogy1 6 лет назад

Great stuff, I'm printing a full size R2D2 on my printer. Do you have plans for your machine? I want to build one with a stationary bed like yours, my design starts to have problems once the print-weight gets over 5kg

@stonefx83 6 лет назад

thanks, haha nice that's pretty big as full size ;) I guess there are a lot of parts... what do you mean by having plans ?? yeah Prusa style printers have their limits on a certain moved mass...

@toby7504 6 лет назад

Awsome...

@Neder_ 6 лет назад

ya podrias poner alguna foto de la pieza terminada en algún sitio

@stonefx83 6 лет назад

Jose Garrido Usted puede verificar la descripción. ;)

@Lensfort 6 лет назад

Whats with the significant changes in infill % all through the print?

@stonefx83 6 лет назад

Saving a lot of plastic and time;)

@Lensfort 6 лет назад

I realize that, but you alternated from about 3% to about 17%, then back to 3% and back again to 17%....

@confuseatronica 6 лет назад

I was wondering about that too... never used simplfy3d, maybe it's some weird thing it can do? Not sure why you wouldn't use the lowest infill the whole way. The exterior finish looks slightly different where the infill changes but it doesn't look BAD at all...just a little different

@NerdForMario 6 лет назад

Great quality do more videos with you printer please

@stonefx83 6 лет назад

I guess it won't be the last Video! Just have some other things to do!:D But there will be more in Future!

@johnleft81 5 лет назад

what are you printing on that BQ Hephestos 2??

@stonefx83 5 лет назад

honestly i think i was printing lots of calibration cube back there....i guess i switched from the original hotend/extruder to a bowden/e3d! ;)

@tylermustardloooser386 6 лет назад

What 3D printer do you have? It must've cost upwards of $1,000 the print is so high quality!

@stonefx83 6 лет назад

thats my custom built printer. and its way above $1000. check out the link in the description for more information.

@leonhardh7927 5 лет назад

How long did it take?

@igel-qd4zg 6 лет назад

Which 3d printer did you use ?

@stonefx83 6 лет назад

Check out description. Its a custom built machine.

@ofoosy 4 года назад

Man that is awesome, it'd print much faster with way less infill though.

@mark62726 6 лет назад

HI man, how many material did you spent on the malcon?

@stonefx83 6 лет назад

mark62726 hey it was 3kg as it says in the description and at the beginning of the video😆😜:p

@TheBuzzorca 6 лет назад

How much filament did it take and when are you painting it up

@stonefx83 6 лет назад

nick Buzzorca It says it at the beginning of the Video how much it was ;) Will painting it soon.

@nicosteffen364 6 лет назад

in the discription is the answer! 3 kg!

@mreid08 6 лет назад

nick Buzzorca 3 kilograms so three rolls of filament

@artkujtimi2088 6 лет назад

Approx. how much material is used to make this?

@stonefx83 6 лет назад

Art Kujtimi Its says it at the beginning of the Video and in the description ;D

@ahyakal 6 лет назад

Nozzle size and layer hight???

@stonefx83 6 лет назад

+ahyakal 0.6 / 0.2

@sinformant 6 лет назад

What layer height?

@stonefx83 6 лет назад

sinformant 0.2mm

@mreid08 6 лет назад

How many hours it are we talking days?

@stonefx83 6 лет назад

mreid08 hey watch the beginning of the video is written in the intro 😌☝

@nosknut 6 лет назад

WTF! How did you get that amazing layer height and adhesion!

@pedrouribe6033 6 лет назад

You just went viral

@Timbo868 5 лет назад

Sadly, I'm still waiting for a full scale fully functional YT-1300 variation.

@Liberty309 6 лет назад

100% jealous :-) LOL !!!

@julianhering4119 6 лет назад

Yo wazzup how much did u spent on each role and where u got from?

@stonefx83 6 лет назад

i guess you talking about filament rolls right ? if so i used exactly that one: www.3d-printerstore.ch/3D-Filament-Resin/3D-Filament-1-75-mm/PLA-Filament-1-75mm/Best-Value-PLA-Filament-1-75mm/PLA-Filament-Best-Value-1-75mm-silber-1kg::1049.html its CHF 22.50 / roll

@g.d.p 6 лет назад

Time print?

@SpicyMilk 6 лет назад

Do you think you can 3D-print the Death Star??

@stonefx83 6 лет назад

Maybe there are few Models out there on Thingiverse.

@honeydew5022 6 лет назад

How much was all the plasticy stuff.... or, by reading the comments I think it is called filament

@stonefx83 6 лет назад

Check the description! :P

@czolgista90 6 лет назад

nice animation...

@stonefx83 6 лет назад

yeah thx! took me weeks to create it to look like its a real printed one!

@SeanReevesD 6 лет назад

Did you happen to make a tutorial when you were building your printer? Yours looks awesome and seems to run quite well.

@stonefx83 6 лет назад

Thanks!! Unfortunately not. I did not even had any Plan. Just started in Fusion360 directly out of my Head and build that thing like "Don't think too much Just do it" ;)

@ugandanidiotwilson6916 6 лет назад

How long did this take? It takes me an hour to do a turtle

@tomgray7049 6 лет назад

Could you do vaders super stardestroyer?

@TheFourWindBadger 6 лет назад

amazing! just kinda sucks it takes so many days to print something like this ! but amazing!

@timbervandenhul9383 3 года назад

Still faster than pretty much any other process though. And less work. Well except if you have to create the file yourself.

@MrVlekie 6 лет назад

any video on your 3d printer build?

@stonefx83 6 лет назад

Hardus Coetzee unfortunately not!

@AshleyDeSouza79 6 лет назад

What camera did you use with the Pi3?

@stonefx83 6 лет назад

Ashley De Souza Using a Microsoft Lifecam Studio.

@ViQRoy89 6 лет назад

9 days.?

@maximedina296 6 лет назад

Falcon?

@valveman12 6 лет назад

Nice print. BTW: You must have modified the bed settings to get it to print that large because your bed would be too small.

@stonefx83 6 лет назад

Thx. The build area is set to max @ 500x400x700. The printer is only limited to a startsize of 300x200. I will add a bigger bed soon!

@valveman12 6 лет назад

That is what I thought you did. I will have to try that myself.

@did3d523 4 года назад

My *DARTH VADER HQ* Complet STL Download :www.cgtrader.com/3d-print-models/miniatures/figurines/darth-vader-the-empire-strikes-back-1-3-scale-3d-print-ready