3D printer enclosure with HEPA filter explained 

Beautiful and elegant design. I commissioned a store glass cabinet maker to enclose my Ender 5 Plus. Very heavy to assemble but worked well. A good learning experience.

Great job on building a good looking enclosure definitely going to use this as a foundation on my enclosure.

Amazing work! Still watching this video but is is already deserve like and comment!

Thanks a lot Daniel. I hope I will be able to build one in the future as soon I get the Mini+.. (I'm waiting for the kit to arrive).. Greetings from the Galilee.

Great video!

You have the filters the wrong way. Air should flow through the HEPA before the active charcoal filter, as the HEPA is for particles, and the active charcoal is for the smaller vapor particles. You could also have a pre-filter before the HEPA for even larger particles. If you look at an air purifier, they will go Pre-Filter > HEPA Filter > Active Charcoal Filter.

you can print the enforcements for the Lack legs so that it doesn't wobble that much. I've used lack for 4 years now, and wobbling is not fatal, though : )

subscribed and liked! thank you

You should consider watching some safety guides on circular saws. Your helper was sitting in the cutpath, fingers and elbow occasionaly crossing it too. Fingers in general too close for comfort. Even worse you put your left hand flat on the cutpath while finishing your cut. If you would have gotten a kickback at that moment you might have considerably less digits today. In the future, if possible, Clamp down your piece. If a helper is needed have them hold the piece as far away from the blade as possible only applying Force straight down to not slip into the blade. Also have them be positioned to the side rather than be in the front to avoid getting cut while you are fighting a kickback, getting startled by something or distracted. Sorry for being a buzzkill, the project looks great but that part got me terrified. Safety first!

Would like to have seen you drill the holes and assemble the acrylic sheets

Thank you for sharing yet again. I am in the process of printing the parts and sourcing the Perspex. I am a bit concerned that you mention that the Lack table is not really suitable as I have already bought one. I hope it turns out ok. I will be placing an Ender 5 Pro in the enclosure ro a bit concerned now.

Hi, great design and video. Did you already printed Abs or nylon? And is de electronics like the power supply outside of the box?

Thanks for the share! Could you let us know where and what type of filters you used?

Wondering if you have spec's a larger 3D printer, like Anycubic Kobra Max. Thanks...

Can you please share the technical drawings for the sheet cutting? grabcad link doesnt work. Also whats the difference between this and Alexander Müllers design?

Can you please share the sheet drawings in one of these formats? .dxf, .dwg, .ai or .eps. I will use sendcutsend and they need drawings from these formats.

Awesome - Can it use electrostatic filters? (Edited electromagnetic to electrostatic)

At 11:11 what are you saying in addition to vibration insulation

You dont need to cut acrylic... just put a hard strong cut with a cutter knife as the breakline and then break it.

I can just use a laser-cutter, no?

I want buy filter tell me link plz

pls smile more, u looks so unhappy.

have you done any testing to see if it effectively pulls particles from the enclosure? like using an air quality meter to measure the air in the enclosure with and without the filter?