3D Prints in the Workshop 21

Подписаться 6 тыс.

Просмотров 19 тыс.

50% 1

The latest collection of 3D prints to assist you around the workshop.
Push block by torselden www.thingiverse.com/thing:3359810
HOLE DIAMETER GAUGE by JHON_DOOM_MAKER on Thingiverse: www.thingiverse.com/thing:486...
Hole center attachment for calipers by Lorenzo__99 on Thingiverse: www.thingiverse.com/thing:463...
Square Guard by A513055; www.thingiverse.com/thing:489...
Vacuum hose support by A513055; www.thingiverse.com/thing:489...
Wood glue station by A513055; www.thingiverse.com/thing:489...

Хобби

Опубликовано:

25 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 29

@RuneOsnes Месяц назад

Quick tip for calipers: To measure the distance between to holes of the same size, first turn the caliper over and use the small, inner arms and zero them in one of the holes. Then flip it back over and measure the holes from the walls nearest to each other and that's you center to center distance. 😊

@johnford7847 8 месяцев назад

Thank you for sharing the "failures" as well as the successes. You saved me some printing time.

@DarrensWorkshop 8 месяцев назад

Cheers John.

@brentseegers6530 2 года назад

Thank you for the 3d printed video series. They are very helpful.

@DarrensWorkshop 2 года назад

Cheers Brent.

@geoffreycoan Год назад

I was given an EasyThreed X1 printer for Christmas by my son, and although its a cheap $100 printer that’s limited to 100mm x 100mm x 100mm prints, I’ve found it great for printing bits for my workshop. Stop blocks, drill chuck holders, vacuum adapters, etc. There’s loads of stuff out there. Thanks for sharing, I’ll be looking at some of the others in this series

@DarrensWorkshop Год назад

Cheers Geoffrey, Have a great day.

@germanshorthairdude 3 года назад

Yet another fantastic video. Thanks a ton!

@DarrensWorkshop 3 года назад

Thank you D Mc

@darrylportelli 3 года назад

I really like this series ... Keep it going !!!!

@DarrensWorkshop 3 года назад

Cheers, will do.

@vhanda99 2 года назад

Great video. Thanks for sharing.

@DarrensWorkshop 2 года назад

My Pleasure Vic. Have a great day.

@mab4110 Год назад

Nice use for 3D printer!

@DarrensWorkshop Год назад

Thanks Farticles.

@jothain 2 года назад

That collar as depth stop seems quite good idea. I think I'll try that one. I absolutely hate the generic rings with set screws.

@DarrensWorkshop Год назад

Hi Jothain, How did you go with the depth stops? Do they work well, and if so which plastic did you use?

@jothain Год назад

@@DarrensWorkshop haven't tested yet, but I think I'll try petg when time comes. I think pla might fail as drills can occasionally get quite hot. I think it's also too hard to work.

@Mister_Stork 3 года назад

Great to see the fails as well 😅

@DarrensWorkshop 3 года назад

Cheers Nico. 👍

@johnvodopija1743 3 года назад

Thank you for another interesting video Darren. I really like the push block. What infill % and # perimeters settings did you use to print it? I will print one for my router table. The glue station and accessories look like a good option too. Be safe and hope the lockdown ends soon. P.s. what flavour of glue do you dip your biscuits in 🤣

@DarrensWorkshop 3 года назад

Lol, I’ll dip in anything rated for internal/external use. I’ve been using Sika lately, but you can’t beat Titebond 3. I know I used three perimeters on the push block, but I’m guessing when I say 30% infill. Yes, fingers crossed on the lockdown. Cheers John.

@vigrue-kingofscrew4804 2 года назад

i want to recommend one cordless screwdriver to you for a test, what should i do

@DarrensWorkshop 2 года назад

Hi Vigrue. That depends. Are you talking about sending me a demo unit to test, or suggesting that I buy one and test it? Cheers Darren.

@vigrue-kingofscrew4804 2 года назад

@@DarrensWorkshop hi, you don't need to buy one, we offer the samples for free, that's what we always do, my email is linky@vigrue.com

@Jeppedy 2 года назад

Did you consider trying these printed tools before you started filming? :-)

@DarrensWorkshop 2 года назад

Hi, with the exception of the drillbit depth stops, I did try the tools before the video was filmed. I thought this was evident in the video. Can I ask why you thought otherwise.

@rem7751 Год назад

First time watching. I have to be honest, you almost lost me right off the bat with that annoying music in your intro. Don't put any good information at the front of your video because I will for sure skip over it fast-forwarding past that annoying music.

@DarrensWorkshop Год назад

Hi Robert, I have just released 3D Prints in the workshop 27. The music is completely different and much shorter. Please let me know what you think. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-w0oMWvwPvL4.html