Dead serious? I’m having trouble understanding how the seat should function in the first place. It’s supposed to be rigid until you adjust the seat angle or you can unlock the seat so it tilts forward allowing the passengers access to the back seat right?
Just figured it out. With the seat removed, remove the non hinge side torx bolt then there’s 4 bolts on the hinge side. Two exposed. Two in the seat. You remove the lower seat piece (the sitting part) first by removing the exposed bolts and torx bolt. You have to then remove the hog rings holding the upper seat fabric down at the bottom so you can peel back the fabric to get at those other bolts. They’re like 3” bolts. Impossible to remove without moving the fabric first.