4/0 Copper Cable Flechette Rounds - Tested 

Great, I guess you will be storming the capital all over again!

I haven't finished the video but a cool idea might be to score or split the cable jacket like a sabot.

when prepping the slugs maybe a lil epoxy down the tube to keep the flechettes from immediately separating?

@@scottstokes1878 idk i think that they are fine with the tape too much epoxy and they would just act like an expensive slug

@@grimreefer8561 i doubt fledermaus stormed the capitol in the first place secondly im fairly certain your just a troll looking for attention sadly the only kind you will receive with idiotic comments like that one is going to be negative dont you know a good portion of those who stormed the capitol were blm and antifa members ?

I'm...shocked, by your comment sir😂

Given past episodes these comments are well grounded.

Ha

Current events might have inspired these amped up loads.

Glad Jeff and company have so many great places to shoot, I'd hate for them to become Ohmless. Come on laugh resistance is futile. If you think the joke is poor have a go telling it yourself. After all the basic premise has potential.

Best.

Aight hear me out, hollow point slugs

@@owlychan5029 they exist lmfao

😂🤣

@@blueberrysunnyd okay hear me out, enriched uranium slugs

the _hello_ speed camera...

@@Metal_Master_YT looks like rosie o'Donnell jumping

thank you!

Agreed

I hope you're Catholic.🤔😑

@@spencermeeks9749 everyone's at least a little bit cath

30 inches of it makes a nice baton too

Boom!

As a warehouse worker who works with those cables, I also approve.

As an electrician that runs this kind of wire I also approve.

as someone that loves to see shit get shot I approve of this :)

@@kylem8992 MAKE SOME and do some tests if you can

*glockoma patients

I see what you did there....

@@easyascherrypie lololol

Lol

I'm certified blind on line and even I didnt see it.

Those invading copper strands would short circuit and crosswire lot of functions. You could raise your arm and end up taking a piss.

They say its shocking

shit, i would hate to be on the wrong end of a gun period

@@Crazyclay78YT Yeah, but if you had to pick between guns, this one is an absolutely awful pick.

Oh how Droll.

Watt a lame joke

Well played sir

Ohm eye.

@@riverlee1265 yeah the truth Hertz.

Lmmaooooo “extreme rate of.....speed”

I was gonna say, your frontal lobe would almost definitely be completely destroyed.

@Another Wacko If you mad no extreme brain swelling of some sort lol

@Another Wacko No. You could not. Or, well, of course, you could, but....like the guy who was bludgeoned to death with a baseball bat.

Actually, helmets tend to have some empty space between your head and the surface, usually half an inch. That could very well be survivable.

@@kibukun nah, fam. Whoever takes that shot is dead af like 9.9/10 times.

LMFAO 😂

😂🤣😂

Lol then you are at the wrong range my friend...

Probably not if you are in Florida.

Hunchback of nordam

@@AA-69 r/cursedcomments

@@AA-69 going up by what, 75 cents?

@@AA-69 I'm about to get a lot of doctors rich... For legal reasons this is a joke

😂 😂

thank you Houston

😂🤣

This is hilariousssss

ATF is baffled.

One time my dad and I was going through a cul-de-sac that our construction company did the ground work for. As we were driving pass the houses being built the carpenters on the first four houses were shooting their nails at each other, we could hear and see the nails flying across the road.

@@buttrnuttr2291 did ya get a flat tire

This messed me right up

Texas didn't like that.

Especially if it's not very good. 🔥

@@nazarderkach9320 So true

A.sort.of reverse mushroom

@@DeandreSteven ..., if the base is soldered it should mushroom quickly and disperse energy fast... in a rifled bore it should be accurate

I want to see it happen

it would also be interesting to see what would happen if you soldered the tip. theoretically it could help keep it together in flight, add a little forward weight to stabilize it, yet disintegrate on impact....

@Vidar D It definitely would help with the factor of over penetration. The slug would stay together at midrange without peppering surrounding area with shot or buckshot. this would effectively extend the range of a shotgun around the neighborhood

I was thinking jb wield on both ends 🤷‍♂️

I was thinking just solder the back end and see what happens.

A few drops of cyanoacrylate glue. Just to give stability during acceleration.

I'm thinking melted wax might work to help hold them together. Or hot glue?

@@andytuesday500 the point is to have the wires pop at some point, though, not cast into a solid block.

Mass accelerator.

@@mikedrop4421 you're right. My bad. It is 2021 after all

You mean mortician ?

@@DL101ca I'm a glass half full sort of guy.

Warhead. I like it hahahaha

@@somelaser5906 Thankyou kindly.

As a novice surgeon on my sister's Barbie dolls and random dead animals... I'd say any surgeon trying to repair a wound similar to this is drunk and needs to go home.

I used to know a guy that did his own custom shotgun loads for shits and giggles... my favorites were probably then 3.5 inch magnum shell stuffed full of penny's, and the solid steel slugs he turned on the lathe. Fun times... Edit: Oh yeah he also shoved a bunch of roofing nails in a 10 gauge.

Ever need to use a truck to pull it when the tugger couldn't handle it? lol

@@taofledermaus I've had to tie one end to a boom lift to pull some slightly smaller cable down a cable tray. That was fun.

Yeah buddy, except it was an old Clark forklift that did the dirty work. I was constantly washing the wire lube off old green

Pro tip: A peice of 500 copper THHN about 3 in Long is better than wrapping your fist around a roll of quarters.

In the Reset World, gun guys will be competing with meth heads

Yeah but where would they get the primers

@@mgelliott86 Book store, education section

@@user-ef4gf7rr9r oh my gosh thats amazing hahahaha 😆

@@mgelliott86 crushed strike-anywhere matches make good primer (will damage gun, clean after use)

thanks Brian!

@@taofledermaus I just reread my comment and apologize for sounding like an uneducated idiot for the poorly structured first sentence. However, I am pretty sure that you guys understood what I was trying to say about it starting out at failed attempts but then the addition of an electrical tape and rifled slug barrel and became a quite formidable defense weapon if needed. In response to your "thanks Brian!" comment, you are very welcome. I did really appreciate watching the demonstration of that improvised round and the process of improving it. I do not currently own a scattergun, so I will not be loading those rounds do defend my own home, however, I do have friends who do. So, I will share this with them. Thanks again.

If there is hole, there is way.

@@juhajuntunen7866 That's what she said.. (Sorry.. I'll let myself out)

Especially with the Diablo 12ga pistol. It's blackpowder, so it makes it easier. No shell 😋

....they didnt shot the drone though :(

Use this one easy trick to strip your heavy guage wire! Scrap recycling centers HATE him!

That is exactly what I did. I sent him 30 of the rounds to test with. I have a bowling pin that took one perfectly and I need to get xrayed.

@@Pyr0531 great idea. I'm gonna try working up a good flying load of this. I'm thinking of soldering ot on both ends like many have commented.. should hold together nice until impact.

@@mattkissmyasstyrants8676 i wonder if JB weld could be a simpler solution

@@thateffinguy2422 probably would be better because no heat involved.. using jb welds wouldn't melt the insulation.. 👍🏻

Seeing that in high speed has made all the work and R&D I have put into this worth every second. The best for last was an understatement.

@@Pyr0531 soon people will be able to 3D print these........ god I love America

@@jesusllanas9318 3D printer would be overkill for making something like that. If you don't have access to such high duty cables, just get 19 short nails, cut heads off of them, pot them in wax or weak glue just to have them hold cylindrical shape + lower turbulence at the front and wrap it in electrical tape to fit the barrel.

@@deldrinov meant 3D printer to help stabilize the rounds or at least give them more predictable flight paths

500 mcm isn't nothing to that 4/0. Bend that shit in a box I know it should have looked as big as a refrigerator but was the size of a 48 cooler.

Having swung a hammer for 20 yrs I'd like to see them work up a load with 8d finish nails or the like. Or perhaps 5d box nails alternated like .22LR in the box?

Thats what she said

thanks for the kind words Antonio!

Thank you very much Horst!

@@taofledermaus Custom round request: an ounce of Airsoft BBs at UK-legal velocities. Law says up to 1 Joule full auto, up to 2 Joules other weapons. Table of weights and 2 Joule muzzle velocities follows: 0.12 g = 1.85 gr @ 182.6 m/s = 599.0 fps 0.20 g = 3.09 gr @ 141.4 m/s = 464.0 fps 0.25 g = 3.86 gr @ 126.5 m/s = 415.0 fps 0.28 g = 4.32 gr @ 119.5 m/s = 392.1 fps 0.30 g = 4.63 gr @ 115.5 m/s = 378.8 fps 0.32 g = 4.94 gr @ 111.8m/s = 366.8 fps 0.36 g = 5.56 gr @ 105.4 m/s = 345.8 fps 0.40 g = 6.17 gr @ 100 m/s = 328.1 fps 0.43 g = 6.64 gr @ 96.45 m/s = 316.4 fps For air rifles, we're restricted to 12 ft-lbf, because that law was written before we went metric, and I've seen a tin of 8.6 gr .177 pellets, so that's approximately US BB size and that means a muzzle velocity of ... how the hell do you work this out in imperial? Ugh. 12 ft-lbf = 16.2698 J, and that's 8.75 gr = 0.56699 g @ 239.56 m/s = 785.965 fps. There. One BB pellet at slightly more than .45 ACP muzzle velocity is legal. Can you hit some things with BB shot at that speed, please?

@@Sableagle I want to be your friend lol. Here in the UK aswell, having similar questions but lack the know how to figure them out

thank you very much!

Ohm my god can you not

I see you are getting some ..... resistance.

@@gerardmourits8709 ... Yes he DID !

Getting shot with one of these rounds must be a truly electrifying experience.

Don't be so negative y'all.. if you can't be positive try to be neutral.

They just need to run it through filters. Would be nice to be able to see thru it.

thank you Joe!!

.625 inch is close to 20, depending on choke.

Your welcome

Next up Fishing hooks and sinkers! Seriously tho try this!

lol that's basically what blunderbusses fired. Its very old tech given a fresh coat of paint.

Nah you would have to make the slug out of tungsten

The Dollar Tree version

Rods from the house elf

Sticks from hicks? Tines from the lines?

The Rods From The Thrift Store

@Robertino Tanos The joke. You.

@Robertino Tanos You don't get sarcasm do you?🤣

*whoosh*

@Robertino Tanos the joke is that North Korea is poor, and that the populace eat dirt for they have no food. It is even more humorous to declare that clay would be in the average military ration as a replacement for more staple food as they have no money nor food to give to their soldiers

@@militaristicsoldier856 Yeah, he still doesn't get it.🤪

Yes we did

So 16 slugs for $3.52. That's a pretty good deal.

@@taofledermaus those were my thoughts also but it is running around $1.85 here in KC

"He's beginning to YEEEHAAA!" - Eugene-Gilbert Morpheus

"yee yee, mr anderson"

Legit surprised with how they carried on, there aren't people yelling out loud for these guys' cancellation because of it. Probably pissed 'em off enough with previous publications to melt away all of the snowflake man-babies.

@@bluephreakr lol 😂

@@bluephreakr snowflakes melted already, the guys(mostly, there is SOME female and other tauflederfolks) are laughing along!

Pistol grip ear's and a quarter slot behind one ear to actuate the folding teeth option...lol...from Wyoming USA 🔫🤠🇺🇸p.s stay safe and healthy everybody GOD BLESS OUR COUNTRY AND stop this foolishness before it's too late...

Saw Leno many years ago at a motorcycle swap meet and he was wearing that dang denim even back then.

I bet the comment go from neutral to positive..

Yeah but then he followed with that beer joke lol

@forteandblues Brutal lol

"shoot out of a mass accelerator".

Yeah back when you could be funny and one particular host wasn't a little beta b**ch

👍👍

The kind of crazy mofos I’d buy a beer for.

much like the 5.56 caliber was intended to do on the battle field personally this round is slightly terrifying and i want 1000 lol

@@ferrofeles2063 ooo yea, that 5.56 bounces around way more than people realize too.

@@ferrofeles2063 I have some more bugs to work out first.