This example device is an electronic circuit that can sense the environment using a sensor that converts real-world measurements into electrical signals. The device processes the information from the sensors with the behavior described in the software (sketch). The device then interacts with the world using actuators, electronic components that can convert an electric signal into physical action, an OLED display, and a Computer monitor via the Internet.
The 4-20 mA current loop has been the standard for signal transmission and electronic control in control systems since the 1950s. In a current loop, the current signal is drawn from a dc power supply, flows through the transmitter, into the controller, and then back to the power supply in a series circuit. The advantage is that the current value does not degrade over long distances, so the current signal remains constant through all components in the loop. The accuracy of the signal is not affected by a voltage drop in the interconnecting wiring.
Arduino Cloud Getting Started
docs.arduino.cc/arduino-cloud/
Code & Hardware Information
github.com/EETechFix/4-20mA_S...
Silicon Pressure Transmitter Transducer Sensor 4-20mA Output G1/4" for Water Gas Oil(0-1.6MPA)
www.amazon.com/gp/product/B07...
Bushing, 1/4" Male NPT to 1/8" Female NPT, Reducing Forging Pipe Adapter Fitting
www.amazon.com/gp/product/B08...
Adafruit INA260 High or Low Side Voltage, Current, Power Sensor
www.adafruit.com/product/4226
www.mouser.com/ProductDetail/...
Nano 33 IoT Product Reference Manual
docs.arduino.cc/static/dabd9d...
INA260 Datasheet
www.ti.com/lit/gpn/ina260
EXTRA Must Watch Informational Video ???
assets.plandemicseries.com/pl...
20 окт 2022