Trifilar coils and separate advanced trigger coil. Run windings are in series. Running on 1 9v battery. Micro switches use mechanical cams to turn off the run circuit and turn on the charge circuit.
Thanks for making this video. Your contribution to technology is much appreciated. Consider adding a joule thief ringer to your input for amazing results. Check out my research. I would recommend testing rpm and draw running from coil 1, then Coil 1 and 2, then coil 1 and 3, coil 2 and 3. In my experience added run coils in series consume 12% more energy each and provide 3% more rpm/torque. Also a joule thief on the output as well would be Interesting to see.
It's a nice build, and I really like your work. I would love to see the axial flux generator in action if you got that one built. The magnets are going to be dragging some on that washing machine so your results are actually better than that man.
The big Bedini With Just 9 Volt Batteries , Is Amazing us, The Key Is Fly Wheel and On Off Generator like Adam Motor generator, but if you put several coil generator overunity is must be Achieve ...Bravo...
If this helps you it actuly helps alot dont have the plastic piece that people normally use to wrap the coil on every mm counts I put it almost straight on to the iron core just wrap plastic around it like you get from a store plastic bag it improves voltage alot
Thanks for the video, but I have one question. I did create my own Bedini ssg and its working as expected. How ever the problem is this. I brought two new battery(12v) one to use as primary and the other as secondary. I discharge the secondary(used it up). Using the Bedini ssg I use the primary to charge up the secondary which is out of juice. Its charging as expected(voltage getting higher from 11.5+) I continue to monitor the voltage from time to time(reaching 12.8V). Seems to be working fine but after sometime I went to check the battery voltage again and there the secondary battery voltage has gone down from (13.4 to 8.5v) so I stop the Bedini ssg and check the secondary again and the voltage is (8.5v). I tried lighting a 12V LED but it last for only 30 sec and the battery is out of juice as expected(Because its only 8.5v). I had previously make myself an 12V battery charger which I used to charge my batteries. So I decided to charge the secondary battery using the 12V battery charger that I have made. But Unlike the previous times my secondary battery this time somehow doesnot want to accept the charging and even after 1 hour+ of charging the voltage remain 8.5. At this point I'm confuse. What is happening to my secondary battery? is it spoil/damaged? Any info regarding this problem will be appreciated. t
From what I read about these a long time ago, when you charged a battery with these pulses, they will self-discharge much faster than a battery that was charged through conventional means. It will be dead battery in only a month or two. So you have to keep charging them.
what's up man, I'll trade ideas with you. I got em aplenty, been doing a while. it doesn't seem like as many people are experimenting anymore. How do we get in touch?
You're right, and at a higher RPM it would be more of a concern. For this prototype, I paid $5.00 for an old exercise bike and used its wheel. I'm still experimenting with it. Currently switching to neodymium magnets. Adding an axial flux generator didn't make any difference. It doesn't output enough at the low RPM. I'm also going to add more turns to the coils...
Doesn't take long to pull a wheel true with a spoke key, you may be surprised how easy it can be with a little practice. Plenty of instructional videos on here. Back to your experiment... What about the wheel laid horizontal instead of vertical ? Thinking if you position the coils all the way round at equal spacing would it make a difference ? ..also woukd it be easier to work on horizontally, especially if your going to eventually add more coils...? Keep up the great work, it's a very interesting subject.
Thanks. I'll look into that spoke key. On this particular wheel the spokes don't look like they're adjustable. They are bent around the hub and are welded to the rim. And the tire is solid. I'm not going to add more coils, just more turns to the windings on the existing coils. Currently have trifilar coils, 800 turns each. I am going to increase the number of turns to 1200 each, to see if increasing the inductance makes a difference.
You say self-charging but that is not really correct. It appears it is charging another battery but the battery is near charge already so not much current required to flow to the battery your charging. Try charging a depleted battery and it will not work. So this does not produce extra power as many think it does. Also running the wheel does not take a lot of current so your 9V battery will last a long time as long as you don't try to charge a battery, then it will die much sooner. Your capacitor example proves my point! The reason you would need more voltage because you need more current. The Bedini motor is a curiosity at best and does not produce extra power.
@@jameselliott9397 Yes I happen to be an expert. Yes, Power output compared to power input is what is consider efficiency. Efficiency will always be less than 100%. The Bedini Motor is a nice toy but not overunity as many have been fooled to believe. I suspect from your comment, you think overunity is possible as well! Good luck with that!
Well it is possible to convert natural energies using electricity as a stimulant. Examples of free natural energy are the sun, the human body, wind, temperature change, gravity and so on.... it is possible to get more electric out than is put in by extracting other energies and running the stimulating device efficiently. An example would be a solar panel is an over unity device. More energy comes out than went into it. Same with a wind turbine. They use other natural energies. But to limit your horizons based on the 100 year old physics lessons is stupid. There is much more to discover..... much much more.
@@jameselliott9397 Ok so you said a Solar Panel and a Wind Turbine are overunity devices? Really? In order to be overunity, the device must operate in a closed system where no external energy is applied yet able to drive a load. How is a Solar Panel or Wind Turbine free energy? Solar Panel is dependant on the Sun and the Wind Turbine is dependant on the wind otherwise a solar panel would work in darkness and a Wind Turbine would work when there is no wind. Interesting you don't have any respect for Physics. Yet here you are typing comments on the internet that is only possible by following and understanding Physics. How Ironic!
Bullshit. Using physics to convert natural energies into useable energy is all that matters. I don’t give a shit about a closed system. I understand physics just fine. Forget the term over unity because an outside power source must be captured in some way. But getting more work out of something than is put in is possible and there are better ways that are yet to be discovered. But if it is left up to people like you, better energy conversion methods will never be discovered.