4 Methods to Fix Stuck at Preparing Automatic Repair Black Screen issue in Windows 10/11

Подписаться 244 тыс.

Просмотров 21 тыс.

50% 1

Stuck at the Windows 10/11 preparing automatic repair black screen? Check this video or follow the tutorial to fix the problem: bit.ly/49RVtHj
Timestamps:
0:00 Intro
0:35 Reasons can cause the Windows to prepare automatic repair
2:04 Method 1: Boot in Safe Mode and Troubleshoot Windows Black Screen
2:51 Method 2: Repair MBR and Rebuild BCD
3:41 Method 3: Reinstall the Graphics Driver
4:23 Method 4: Rolling Back the Graphics Driver
5:04 How to Recover Your Data When the Computer Failed to Boot Up
Encountering automatic repair loops or facing a preparing automatic repair boot loop of death can be frustrating. Discover effective strategies to tackle these issues swiftly, avoiding system downtimes and ensuring seamless functionality.
Explore insights into common problems like stuck on preparing automatic repair and reasons behind persistent preparing automatic repair loops. Learn about Windows troubleshooting techniques, from windows 10 repair to dealing with automatic repair windows 10 scenarios.
Unravel the mysteries behind windows automatic repair and get acquainted with practical solutions. Whether it's windows 11 repair or resolving hp preparing automatic repair, this video provides comprehensive guidance.
How Fix a Black Screen after Preparing Automatic Repair?
Method 1: Boot in Safe Mode
1. Restart your PC and continually press the F8 key (or Shift + F8) as it boots up.
2. Select 'Troubleshoot' → 'Advanced options' → 'Startup Settings'.
3. Choose 'Enable Safe Mode with Networking'.
4. Once in Safe Mode, conduct a system diagnosis using Windows tools like System File Checker.
5. Repair any identified errors and restart your system to see if the issue resolves.
Method 2: Repair MBR and Rebuild BCD
1. Boot from a Windows installation media and click on 'Repair your computer'.
2. Navigate to 'Troubleshoot' → 'Advanced Options' → 'Command Prompt'.
3. In the Command Prompt, type the following commands one after another: bootrec /fixmbr, bootrec /fixboot, and bootrec /rebuildbcd.
4. After entering the commands, restart your computer to see if the issue is resolved.
Method 3: Reinstall the Graphics Driver
1. Boot your PC in Safe Mode as described earlier.
2. Navigate to Device Manager and find your graphics driver under Display Adapters.
3. Right-click and choose 'Uninstall'. Make sure to select the option to delete the driver software for the device.
Method 4: Rolling Back the Graphics Driver
1. Again, boot into Safe Mode to access Device Manager.
2. Find your graphics driver under Display Adapters, right-click and select 'Properties'.
3. Navigate to the 'Driver' tab and click 'Roll Back Driver'. Follow the prompts and then restart your computer to apply the changes.
SUBSCRIBE to get more solutions: ru-vid.com...
▶Follow us on TikTok / wondersharerecoverit
▶Follow us on Facebook / recoveritdatarecovery
▶Follow us on Twitter / ws_recoverit
▶Follow us on Instagram / wondershare.recoverit
▶Follow us on Quora Space: www.quora.com/q/recoverit
▶Follow us on our Quora account: www.quora.com/profile/Theo-Lucia

Наука

Опубликовано:

25 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 53

@trainwrecka 2 месяца назад

So, I’m stuck at a black screen and the solution is to use Windows to fix it? What even is this solution.

@RecoveritDataRecoverySoftware 2 месяца назад

Hi there, thank you for your question! If you're referring to a MAC machine then I would try reset your NVRAM/Pram by turning off your mac and when you turn it on immediately press the Option + Command + P + R. keys and keep holding it until you hear the startup sound or the mac logo then release the keys and let the MAC boot hopefully that helps. If that doesn't work id recommend taking it to the apple store to see if they can help with your issue.

@dolph123454321 Месяц назад

You've basically just said how you don't know how to fix the issue you're describing in the title of the video. This guy said nothing about Mac. Whats wrong with this video: Question: how do i fix my computer that's stuck on "Preparing Automatic Repair" and thus won't load into Windows. Solution: load into Windows ??? I mean c'mon. Change the title that actually describes what you're trying to solve. As for my case, I'm stuck loading the boot media. Suggestion: stop regurgitating what is written all over the internet and find a way to fix the issue described in the title

@tnonkosi8021 20 дней назад

How do I fix my Samsung laptop stuck on "Preparing automatic repair" I've tried to press power button for few seconds, and power it back on. Still same problem persists

@trainwrecka 2 месяца назад

I left Windows for Mac back in the XP days. I came back a year ago and it has been an absolute nightmare of bugs and issues. Hours of troubleshooting videos in this single year. 20+ on Mac and I’m not sure I watched one.

@stiven355 Месяц назад

My laptop keeps booting up into preparing automatic repair and it wont boot up normally anymore. I tried every option in repair mode and nothing seems to work. I can't even reset my laptop it just says "couldn't reset your pc no changes were made" it's crazy how they have all these troubleshoot options just for them not to work

@RecoveritDataRecoverySoftware Месяц назад

Hi there, thank you for your question! I would recommend trying to boot from a Windows installation media like a USB drive and then choose “Repair your computer” > “Troubleshoot” > “Command Prompt" and run the following commands:"chkdsk /f /r C:", "sfc /scannow" then restart your laptop and check if the issue persists.

@charlesmckenna712 3 месяца назад

I've got no problems must be doing it right thank you for your talk Me

@rianDgy Месяц назад

to everyone who got stuck at this try to unplug your gpu first and see if your motherboard has its own vga output, plug in your monitor cable to that output and viola, you can see the repair screen after the windows fixed you can use your gpu again it works for me

@ALOMA-nj5kn 2 месяца назад

Hello i have an isssue its still blackscreen i cant into safe mode cause when i boot up my pc it shows nothing on the screens and my mouse and keyboard don’t light up its just the pc that has lights

@austenchulan4669 2 месяца назад

Same. Mine is lenovo ideapad 3

@yumihikokitsuragi1377 2 месяца назад

Hi, i still have the issue. when i start my pc it shows the motherboards brand and below it the Preparing automatic repair. The issue is that the little dots do not make a full circle before it shuts down by itself. I have tried placing another ssd from an old laptop but it still did the same thing. Have you ever encountered this?

@RecoveritDataRecoverySoftware 2 месяца назад

Hi there, thank you for your question! If you tried the steps in the video and nothing worked I would recommend trying to reset the CMOS battery in the motherboard. If none of that works I would recommend taking it to a professional for further assistance.

@yumihikokitsuragi1377 2 месяца назад

@@RecoveritDataRecoverySoftware Thank you so much for taking the time to respond to my question.

@ragesservises6989 Месяц назад

You ever figure out the problem ?

@ragesservises6989 Месяц назад

@notorious_amature9665 27 дней назад

Same problem

@vortexlt738 2 месяца назад

I disabled my laptops keyboard(via making it install a wrong keyboard file(as in this case a samsung one while my laptop is asus), and ever since, it just says this automatic repair or is on the turning on loading screen infinitely. I did enable it back to the correct one in safe mode, yet still nothing is working...

@RecoveritDataRecoverySoftware 2 месяца назад

Hi there, thank you for your question! If you believe its because u installed the wrong keyboard file try rolling back the driver by using windows key + R then type "devmgmt.msc" and press enter. click on the keyboard device and select delete driver and then try update it afterwards. Try running a SFC scan by using command prompt and then type "sfc /scannow" and press enter.

@D0wnButN0t0ut 2 месяца назад

I hate to be the bearer of bad news, but I had this same issue and at least in my case it turned out to be a failed CPU 😪 good luck out there...

@artemis2027 2 месяца назад

My issue im having is the pc is booting up but then sfter the windows logo appears saying "preparing automjc repair" it just goes back and stays there until i restart. I cant get to the windows troubleshoot screen since i need a password i have never had.

@RecoveritDataRecoverySoftware 2 месяца назад

Hi there, thank you for your question! If you tried all the steps in the video I would recommend trying to make a bootable USB drive to try to run the automatic repair and hopefully solve your issue.

@aequoreal_hehe 14 дней назад

So here's my problem.. i had two monitors attached to my pc.. i removed one and now use only one monitor.. its an acer monitor.. the day i removed it at night.. the next day it was working fine in the day.. bjt im the evening i tried to turn it on then it was stuck on windows loading screen.. i force shut down it.. restarted again few times.. then the preparing automatic repair screen came.. and after that no diagnosing your pc is showing up.. its stuck on a black screen with a slightly bigger cursor.. this has been happening agin and again.. i cannot get to the blue screen where it shows select options.. i also tried removing and putting my ram back in because i thought it may be loose .. but nothing happened Please help meee😢

@RecoveritDataRecoverySoftware 14 дней назад

Hi there, thank you for your question! I would recommend trying to use a bootable USB drive with windows installed and see if you can get into windows to try run some diagnostic tools as it seems its probably more of an issue with the internal components of your computer.

@hxze4166 2 месяца назад

How i do fix... Where after i just turn it on... It just loads Preparing Automatic Repair then after it's just black screen?

@RecoveritDataRecoverySoftware 2 месяца назад

Hi there, thank you for your question! I would recommend using a bootable USB drive to try and run your automatic repair and hopefully allow you to scan and repair you computer.

@TheOriginalJenafire Месяц назад

So what option when you can't even get into safe mode?

@RecoveritDataRecoverySoftware Месяц назад

Hi there, thank you for your question! I would recommend downloading windows onto a USB Drive and then using the bootable USB drive to run your safe mode on your device.

@arminafghani 2 месяца назад

Buddy I was using my PC as usual and one day while turning it on it was much taking longer than usual(mine usually booted within 5-6 seconds but even if I had it running for 30 minutes it didn't boot). Then I hit the restart button but this time it showed preparing automatic repair and then after a while it took me to a black screen with only my mouse pointer. I'm scared bro, this pc costed me a lot. 😭😭

@RecoveritDataRecoverySoftware 2 месяца назад

Hi there, thank you for your question! Could you provide me with any more information on why you think this issue occurred did you download any new software or do anything different from the norm? I would recommend creating a bootable USB drive and trying to run windows from that and then attempting to repair your computer using the USB.

@rianDgy Месяц назад

try this bro tunplug your gpu first and see if your motherboard has its own vga output, plug in your monitor cable to that output and viola, you can see the repair screen after the windows fixed you can use your gpu again it works for me

@jeseemuba2722 3 месяца назад

Man ive stuck in the screen showing diagnosing your pc for 2 days, and ive tried to restart multiple times

@RecoveritDataRecoverySoftware 3 месяца назад

Hi there, thank you for your question! I would recommend trying to hard reset your pc by unplugging all the power cables or remove the battery from a laptop then leave the pc off for a few minutes so all temporary cache can be cleared then trying turning it back on. If your PC still gets stuck, consider using the EaseUS Partition Master Professional. This tool allows you to create a bootable USB and repair problematic Windows. It scans for missing or corrupted system files needed for booting and replaces or repairs them.

@jeseemuba2722 3 месяца назад

@@RecoveritDataRecoverySoftware thanku for your reply, tried it many time still not working 🥲

@light_switch___8920 3 месяца назад

@@RecoveritDataRecoverySoftwareI've tried that along with other things and nothing works

@precisionxhost4147 3 месяца назад

I have the black screen and it says hard disk not found what do I do

@RecoveritDataRecoverySoftware 3 месяца назад

Hi there, If your external hard disk is not showing up in disk management, it's possible that there is an issue with the connection between the hard disk and your computer. Here are some steps you can take to troubleshoot the issue: Check the cable and connections. Check if the hard disk is spinning up. Check if the hard disk is recognized on another computer. Check the power supply. Try data recovery software. Download Recoverit here: bit.ly/3ZoowNK If none of these steps work, it's possible that the hard disk has failed and may need to be replaced.

@playlister348 2 месяца назад

Hey, what do i do if i dont have startup settings?

@RecoveritDataRecoverySoftware 2 месяца назад

Hi there, thank you for your question! Press the windows key + R Then type "msconfig" and hit enter then go to the boot section check the safe boot option and confirm then you should be able safe boot.

@playlister348 2 месяца назад

@@RecoveritDataRecoverySoftware i kinda cant type nothing, only in command prompt i can type. Im stuck in advanced options and every time i reset my computer it says choose your keyboard layout. After that it says choose an option. I only have troubleshoot and turn off your power. After i click troubleshoot i have startup repair, command prompt, uninstall updates, UEFI firmware settings, system restore, and system image recovery. I may have deleted something off my computer that got me trapped in this loop where the startup repair or system restore doesnt work. I really need help.

@ChrisXedits11 2 месяца назад

I’ve been trying to fix for 2 days I’ve tried everything and it’s just not working 😢

@RecoveritDataRecoverySoftware 2 месяца назад

Hi there, Could you please elaborate on your issue when did it start happening what solutions have you tried? We're glad to help.

@NaZia_Love_by_bts Месяц назад

me too😢

@ChrisXedits11 Месяц назад

@@NaZia_Love_by_bts i manged to get it fixed. you need to buy a fresh new ssd and then redownload windows

@HardGame334 3 месяца назад

Nice shairing. Thanks ..... but i got window startup repair error .i try all mathod to solve , recovery image .comannd (add cod" bootrec"etc all.i have no usb .or cd .driver ..... how can i fix this error.plz must reply .is there any solution 4 me ... 😢 i have window 7.....if u habe any video about it paste the link please ....i search but not got any video.😢👍

@RecoveritDataRecoverySoftware 3 месяца назад

Hi there, thank you for your question! This can happen when there is a problem with the master boot record or the WINLOAD.EXE file. One option is to use the Startup Repair tool, which is part of the Windows Recovery Environment (WinRE) you need to turn your computer on and off three times. While booting, make sure you turn off the computer when you see the Windows logo. After the third interruption, Windows 10 will boot into diagnostics mode. Click Advanced options when the recovery screen appears. Click Troubleshoot. Click Advanced options. Then, click Startup Repair.

@SlapManTV Месяц назад

hi my pc is at that part that its loading preparing automatc repair but it aint windows its tuf gaming😢

@RecoveritDataRecoverySoftware Месяц назад

Hi there, thank you for your question! If you tried all the steps in the video I would recommend taking it to a professional for further assistance.

@RuseRour 3 месяца назад

I’ve been stuck on the automatic repair screen for 2 days I can’t get my laptop onto the blue screen with the options on it

@RecoveritDataRecoverySoftware 3 месяца назад

Hi there, thank you for your question! Try run system repair tools, such as chkdsk and sfc, to check and repair any missing or corrupted system files. You can do this by booting from a Windows installation media (such as a DVD or a USB flash drive) and choosing “Repair your computer” from the first screen. Then, select “Troubleshoot” > “Advanced options” > “Command Prompt”. In the command prompt, type chkdsk /f /r and press Enter to run the chkdsk tool.