4 support tips for perfect 3d prints

Подписаться 1,6 млн

Просмотров 65 тыс.

50% 1

Download PrusaSlicer here: www.prusa3d.com/prusaslicer/
Go watch the Prusa Tutorials: / prusajr
Since I began 3D Printing, I've found supports to be a frustrating necessity. They do perform a job, but they are a real pain in the behind. Sometimes they stick too well and can't be removed, they make prints take longer, they mar the surfaces. All around, they are just a bummer. However, if you start to dig into how they work, and how to adjust them, you can really get some great results.
Find more at the Maker Shed: makershed.com
Getting Started with 3D Printing: www.makershed.com/products/ma...
The team at Prusa 3D shared some tips with me on four areas to tweak for improvement on my 3D printing supports.

Хобби

Опубликовано:

8 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 36

@CalebKraftmakes 3 года назад

I remember ages ago when all my supports were fused all the time (on a taz4). The new supports are soooo much better, but they're nothing compared to what you can do with some tweaks. What other tweaks have you discovered to get them right?

@UDoIt2 Год назад

Thank you for sharing this Caleb. It was helpful.

@affinityroadster3942 2 года назад

Fantastic video. Thank you for the tips!

@NickHorvath 3 года назад

You really should have mentioned rotating the model to minimize need for supports. Sometimes a creative rotation will solve all your print problems.

@float32 Год назад

There are plugins to automatically find this now.

@coalachaos6486 29 дней назад

Dude! I am your Doppelganger! Just with shorter beard and hair!

@MuhammadDaudkhanTV100 3 года назад

Great full ideas

@alinecab 3 года назад

Very helpful. Thanks🤓👍

@zach008900 Год назад

Great explanation, thanks :D

@WoodenCreationz 3 года назад

Great job Caleb!! - Brian

@Savage1776_ 2 года назад

There are great plug ins too that help.. you can actually pick the angle of support as well as what type of support whether it's a box shape or circle...etc... but it takes time to get all this stuff down...just have fun with it in the mean time

@hassanal-mosawi4235 3 года назад

Thanks for sharing that

@smportis 2 года назад

Thanks - very helpful

@polo000123 3 года назад

Thank you so much !!!!

@boboscurse4130 4 месяца назад

I cannot get my Z distance right. The overhang isn't even that steep but I either get supports fused to the part, or nasty sagging surface. About ready to just quit. LOL

@nitrorsfour 5 дней назад

Awesome thanks

@Saleh19999 Год назад

thank you so much

@Dieselcanister 17 дней назад

i somehow printed with no support and when it made the arch, it just floated in the air like nothing

@charlesfield9286 Год назад

perfect thanks

@jkaluski 3 года назад

You are the Dave Grohl of 3d printing, in more ways than one.

@Savage1776_ 2 года назад

Dave Grohl of Nirvana ad the drummer or the front man guitarist Dave Grohl?

@thepoliticalstartrek 2 года назад

Id a deburring tool a good tool to have ?

@robertdaone Год назад

What's the best way to get rid of the roughness left underneath the object by the supports? Every time I remove the supports, the area they were attached to are very rough underneath.

@float32 Год назад

I’m looking for an answer to this too. From what I’ve found, it’ll never be as good, since it’s required that the layer above the support isn’t fused to the supports. Someone recommended reducing the support z distance, at the risk of sticking. I think we need some sort of support tower test, to sweep through settings.

@bhhvvbvgyvbuvv 11 месяцев назад

Mine supports arent exactly fused. They are a pain in the ass to remove though

@aimeedeblaiso7187 Год назад

I'm getting one so I'm watching this

@aimeedeblaiso7187 Год назад

So this will help

@philg4116 Год назад

Why are you printing Mark Cuban?

@makewithmegma Год назад

💕👍

@xsagemasterx Год назад

comprehensive

@Pyriscent 8 месяцев назад

3:30 ever since you got the Mark 3S removing supports in a difficult way hasn't been something you'd have to deal with? A prusa is no better than any other printer and I understand you are sponsored by them but this has to do with your slicing settings, not the printer. If anything there are other printers that will allow support removal far easier than a prusa.

@redwhiteandbluebonnets8180 9 месяцев назад

Why am suddenly craving a Whopper from Burger King?

@gaboaaa23 2 года назад

hi, do you think that this model positioning will work and print fine? Or how would you place this object to avoid failurs? drive.google.com/file/d/104Z6Bw0C3-GILCXklRpnXFM8-s1mhFaj/view?usp=sharing Its a resin printer. Thanks.