#40 XP Deus, DIY water kit for under $10 

Could you explain the meaning of upbraid? Which part is 2.15cm, and which is 4.3cm?

Hi Greg, I wish i new nice people like that lol. Thanks for taking a look mate. GL&HH

Thanks John, It will just be nice going out and only having to put one detector in the car knowing it can handle anything. I will just leave the mod on mine, it's not a lot of extra weight lol, but if you wanted to just run it up the outside of the shaft few bits of tape, and ya done, easy on easy off. ATB Buddy.

Hey Rob, So easy to do mate and worth every Penny, It turns my Deus into a even better machine. ATB mate

lol.... look out for the all new Pooper Scooper Ha Ha. Cheers Tony.

With a remote pin point switch :)

Cheers mate, thanks for watching.

Thanks Buddy, I am still using it and it works flawlessly, however i did a modification, instead of the wire coming out the end of the shaft at the coil bolt, I drilled a hole just above where the bolt is and brought the wire out through there, I was finding that the wire was getting pinched and wearing through coming out off the end. ATB mate.

Thanks for watching and your encouraging comments, sorry to hear about your charging clip, but you should be able to pick one of those up pretty cheap, But if mine ever breaks? then be sure that i will have a go a making my own and share in a video. Good luck and take it easy, Brit in Canada lol.

Quite possibly it would mate, just give it a go and run it on the outside first. Good Luck.

Pommy-Down-Under cheers big ears lol

75 ohms mate

Thank you

It came with the Deus mate, if you didn't get one check out eBay or maybe ask around on the Facebook groups, Good luck.

This might help you out. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Zrwyi8lpG6A.html

G Day mate, that's what I did to start with, but I got fed up redoing it, now i just have it taped on so i can bend the wire out of the way and leave it all taped up to charge. GL&HH

And your wire is much shorter than stock. I had assumed that the stock length was adjusted to tune to a frequency (like an antenna) so that it shouldn't be shortened. But your idea seems to dispute that. So if one only wanted to wade, say knee deep, no reason the stock wire could not be shortened?

The Deus coil is a transmitter and the head unit is a receiver, the coil cant transmit through water so the wire acts as the air if you like. I did a little experimenting and didn't make any difference on the length of the wire. Also i did a modification, instead of the wire coming out the end of the shaft at the coil bolt, I drilled a hole just above where the bolt is and brought the wire out through there, I was finding that the wire was getting pinched and wearing through coming out off the end. ATB mate.

Thanks. You've opened a whole new approach.

No! only if you go in deep puddles.

@@PommyDownUnder Cheers have you done a video co vetting head phones into xp deus ones

@@xxyxnxwxaxx9724 No mate sorry. Happy Hunting