There is no limit to the perfection of the device ,the hand of the master is visible in everything!Thank you for everything you do for us )a lot of necessary and useful information!Health to you and your loved ones!Prosperity to you and good signals for katukha)
Nice one guys, I’ve lived most of these... You should of added the Deus pinch lol... I had another one the other day... Take Care... Best Wishes CMNW 🏴
Every month of two while not in use be sure to check the battery level of the components, especially the ones that have the flashing light. I just checked my pinpointer and it was dead.
@@hexensage196 I bought it used, no warranty I found out later. But it took a charge and works fine. I checked it not too long ago so it wasn't flat for long. The battery is supposedly easy enough to replace and not that expensive. The battery controller shuts it down before it gets too flat. But yeah, make sure to check it now and then.
I know this is an old post. I use a Deus 1 and when I charge the coil the light on the coil is solid but I still get the little flicker in it. This is on a Non HF and non XF 35 coil, just an original old school coil.
Good info Garry and Grant, Thank you👍🏻 Now please explain to me how it comes that whenever I am on a pasture with cows, I always get a brilliant sound like a good target sounds whenever I swing my coil over cow shit? Thank you in advance
Thanks for the video, guys. I love your channel. I’ve had no issues with charging, I could immediately visually see how it seats properly. My only real concern is trying to conserve that battery for days when I won’t have access to a power outlet for days. I get 8 continuous hours, which is awesome!, however idealistically thinking, it would be better to be able to spread that 8 hours out for as long as possible. Thanks for your informative videos! Cheerio:-)
Great video guys and I always wondered about the coil signals when tapping rocks as some of my fields are very flint rocky, will certainly look into the GB Manual settings. Great Giveaway and I have seen this on my Twitter and Instagram but I am not on Favebook so sadly I cannot enter but good luck to everyone else. One thing with the backphones is it does not work for me since I had my major ear op and I have to rest the back bar towards the top of my head sadly, however during the winter I use my WS5 for much more comfort. One question with the WS4 is why is it when changing coils that the Puck does not pre connect as I always have to go into the settings and change it to the coil that is connected to the control box?
You MUST have the WS4's turned on before changing coils otherwise they simply don't know you've changed however that's also how you split a Deus into two machines, remote to one coil & headphones to another.
WHEN I,M CHARGING MY H F CIOL THE LIGHT STAYES ON PERMANENTLY, IT DOES NOT FLASH TO INDICATE THAT IT IS FULLY CHARGED. ANY TIPS WOULD BE MOST APPRECIATED
@@Yakena1Small, deeper target quiet often giving iffy signals. Signals from this target can jump over all ID detector scale. When you removing sam ID, you can automaticly notch signals related to this number....
Excellent! 👍🏻👍🏻👍🏻 Great tips gents! Well apart from the single USB cable, I really think you will have a huge amount of trouble updating the devices with a Micro USB connector! 🤔😳🤭
Watched so many of your videos, really enjoyed them. So today i purchased an XP ORX. I just the light weight. And your videos will all be watched again with the machine at hand. I notice that the dim light on the wireless headphones continues to blink after the detector is turned off. I also try to turn off the phones by pressing the + and - buttons but it continues to blink. Is that normal?
Hi, I have bout HF Coils and X35, so wood be very nice to have same ID on all frequency's, I was not aware of this ID NORM option, but I can se that this option is only awailable on the X35 coil and not the HF coils??
Gary my ws4 head phones are constantly dead I charge them they work I put them in the case and drive around for a few days with them and try to use them and there dead Is it possible the the on button is being turned on while it is bouncing around in the truck ? and if so why did xp have one button to turn on the ws4 and you have to push two buttons to turn off when it should be the other way around ? I enjoy the videos and your sense of humor my dog goes detecting with me also I finally got her to stop digging up my plugs when I'm not looking thanks.
Hi Michael, It sounds as though your battery is tired, a new battery should sort that, the on/off buttons were done for a reason, turning on is easy with one button but harder to turn off with two simultaneous buttons, why ? it would be very difficult to accidentally turn them off if two need pressing at the same time whereas a single button it could happen.
@@RegtonDetectors Thanks for your response I've had my ws4 charged and out of the case for a week all is well stays charged fine guess i'll just have to keep them out of the case this is my favorite machine it actually fits in a back pack it's the only one I've bought that works as it should
Bought a brand new ORX used it for about and shut it off and didn't use it for a week and now when I turn it on it don't do anything. It acts like it's locked up. My coil and Box is changed Up. I guess I wasted $600.00 dollars. Never again buying a XP Product !!!
For some reason the HF coil does not always start blinking when charged. The dealer told me XP is aware of this however is not doing anything about rectifying this coil malfunction. Any idea on why this is not being looked at?
I HAVE THE SAME PROBLEM M8, I SPOKE TO NIGEL AT REGTONS AND HE VERRY KINDLY SENT ME A NEW CHARGING CLIP AND CABLES, BUT SADLY THE PROBLEM IS STILL THERE.
