Here is the fourth part of a video series I made while rebuilding the 42RE (version of the A518 torqueflite transmission*) out of a 1997 Jeep Grand Cherokee with a 4.0L straight six. 2WD
I go over the steps to take apart the transmission, rebuild and reassemble it, talking about the details on the way, what tools I used, torque specs, issues that arose and how I was dealing with them.
If you have the 4x4 version of the transmission the rear seal and the overdrive tailpiece will be a different shape, also the speed sensor is moved to the transfer case, but almost all of the other details should be similar or the same.**
In this part we go over:
Valve body connector rebuild,
3-4 accumulator spring rebuild,
Governor body solenoid removal & cleaning,
Sun gear center pin install,Sun gear/ drive shell planetaries assembly install,
Rear overdrive piston installation,
Clutch packs, tab, and thrust washer installation,
Front band installation,
Oil pump installation,
Overdrive installation (horizontal, I ended up doing it vertical in part 6)
This Video Continues in 42RE Rebuild Parts 5 and 6
#42RE #mopar #Jeep #grandcherokee #zj #4.0l #transmission #rebuild #diy #righttorepair #2wd #4x4 #liveforever #haasautowest #1994 #1995 #1996 #1997 #1998 #1999 #2000 #2001 #2002 #2003 #2004 #asmr #atf+4, #A518, #46RH,
*The A518, later renamed 46RH (hydraulic controlled governor pressure) and 46RE/42RE (electronic controlled governor pressure), is an A727 derivative with overdrive, in the A500 ilk.
**If you are a whacky gear head like me and want to take the tailpiece off of a 4WD jeep and add it to your 2WD version of the trans. in a crazy 4x4 upgrade (which none of us should probably eve do to ourselves) I was told the intermediate shaft would also have to be swapped out.
This Video Continues in 42RE Rebuild Parts 5 and 6
15 дек 2023
