(45) TOOL REVIEW! The Trend Lock Jig 

to clamp it to the door. Cheers

Its only a quick overview, but worth looking into if you need something like this. I made the box myself!

@@locksmith-training OK thanks , iv searched everywhere for one lol

Yes ideally you'd need a long cutter and large router. I basically use the smaller router and cutter to make a shallow recess then finish the full mortice with a Auger bit, it saves time on the marking and setting out. Cheers

Sorry no jig for the Jambs for Trend, I have some made by myself, or its get the chisels out! 👍🏻

unsure I've had this many years, I'll usually cut in by hand as its not worth setting up for just one lock. Though I'm guessing there are plenty of different jigs available now.

They do cover a good portion, if you don't have the absolute correct one, just find the size smaller than you need, and just finish with a chisel!

Yes, absolutely

Hi, these are spacers, they are used to hold the jig off the face of the door so the guide bush doesn't scrape on it as you router.