4x12 Series Parallel Wiring Tutorial

Подписаться 4 тыс.

Просмотров 39 тыс.

50% 1

This is a quick instructional video on how to wire a 4x12 speaker cabinet in a SERIES/PARALLEL configuration.
When utilizing a SERIES/PARALLEL wiring scheme each pair of speakers is wired in series, then each series pair is wired together in parallel. When all four speakers have the same impedance, your final load will match. If you have four 16 ohm speakers, your final load will be 16 ohms, 8Ω will yield 8Ω and so on and so forth.
The style I use is similar to the way old vintage Marshall cabinets are wired.
The diagram shown on the video can be downloaded in the link below
drive.google.com/file/d/1W3XW...

Видеоклипы

Опубликовано:

25 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 47

@cheezboi1.041 6 дней назад

Thank you so much. I've been working on a speaker project that has 4×4 2ohm speakers and I wanted to use a 2.5 ohm amplifier so this video was helpful. Ones again thanks👍🏾

@allengray5748 3 месяца назад

Ok FINALLY!! Seen a bunch of videos and none of them showed what they did at the jack being the parallel end of the equation! One guy had shaky blurry video, don't know why he bothered or how proud he could have been?? Great clean articulate video and now I have the confidence! Thanks!! Peace 🕊️☮️

@joel289 3 месяца назад

Thanks so much. Just wired up my first 4x12 with your video playing on my phone - came out perfect. Thanks again!

@MarkEagleton Год назад

It’s actually very helpful to see the process with the twisted pairs. Nice and tidy. Thanks for posting this.

@FarBeyondMetalz Год назад

This is exactly the video I wanted to see because I've seen you do this in other videos but I'm really bad at this stuff. Thanks a lot !

@andrewbrewer3050 Год назад

Glad to see you back. Your killing it!!

@ParanormalResponse Год назад

It was such a calm relaxing Mr Robinson(esqu) video until 3:37

@lovecraftmusic8717 5 месяцев назад

Still calm compared to me.

@adonikam1 8 месяцев назад

EXCELLENT VIDEO I SUBSCRIBED! GLAD I FOUND YOUR CHANNEL.

@ianstrickland5280 Год назад

love vids showing cabs, more please lol

@EddieB2047 10 месяцев назад

Killer tutorial🤟🏼

@AriestheLegendRVA Год назад

I dig your videos

@prettywiththelightsout Год назад

I want to go buy speaker wire just to twist it with the drill. It's mesmerizing.

@jessicaembers924 3 месяца назад

Easy peasy. I've got four 15's in a big DIY box.

@purgasound 3 месяца назад

4x15's are killer!

@jessicaembers924 3 месяца назад

@@purgasound There's a picture of one in my song "Passion Of Essence" here on RU-vid. I've got 2 boxes like that.

@walklikeaman263 Год назад

Excellent !

@JohnBrown-cz7ww 3 месяца назад

Hey its Jim Morrison reincarnated. Good tutorial, thanks for the info.

@Cougar139tweak 8 месяцев назад

@2;12 I hate to be "That guy" but best to heat the wire and terminal versus using soldering iron to "pool up" solder Coming from an Avionics tech....the connection will be much better, and last longer. Otherwise spot on, your way is the cleanest I've seen, sent this to a friend who asked best way to do this, video is always best...better than explaining to him.

@russiangoose7053 Год назад

Wish I had this video a few weeks ago when my 1960 with T75's started acting up haha. Turns out the solder joints on one of the jacks on the stereo switching PCB broke loose somehow so I just replaced it all with just one normal jack and blocked off the holes similar to how you did. Also where do you get metal handles for your Marshall cabs? I'm looking to replace my plastic ones since they're getting pretty broken up. Thanks for another awesome video!

@andyhightides Год назад

I've been thinking about a 2x10 cab. As light as possible, and able to do 4 or 16 ohms. If you had any suggestions, it's for a '64 Bandmaster (4 ohm), or a Traynor Darkhorse (16 ohm).

@cbang000 Год назад

Would you still wire it this way if there was a divider between the top and bottom speakers?

@norcal8718 Год назад

Where can I get one of those shirts, I love it!!! Al Bundy is my hero 👍🏻 Lol

@Crackattak213 7 месяцев назад

Say id want to switch a speaker out , with a v30 16ohm, would that work?

@FearGodandRepent 3 месяца назад

So if i have 4 d4 12s and qire them jut like you just did those. Will that make it 1ohm at the amp???

@glenprovidence4769 8 месяцев назад

If I were to build two speaker boxes containing two 18 inch 8 ohm subwoofers each and wired them both in series. Both boxes would play at 16 ohms. If I were to then daisy chain them together at the speakon connectors would they then both revert to 8 ohm impedence or both play at 16 ohms?

@purgasound 8 месяцев назад

If two 16 ohm loads are daisy chained together (connected in parallel) then the final load would be 8 ohms, yes.

@glenprovidence4769 8 месяцев назад

@purgasound I mean with cable from the amplifier to the input of one box and from the output of that box to the input of the other via the speakon connectors outside the boxes. That would mean they would both be playing at 8 ohms if they were both wired in series at 16 ohms...yes?

@timlee2014 Год назад

how do I wire (2) 8 ohm speakers in a cabinet to connect to an amp head with 8 ohm output?

@purgasound Год назад

Unfortunately that can't be done. The two 8 ohm speakers would either be 4 ohms in parallel or 16 ohms in series. You could run a mismatch into a 16 ohm load but I never recommend it if it can be avoided. When mismatching never run the amp at full volume.

@Hhhhuvgfs 5 месяцев назад

Don't say what's up better to say hi, helloo, how are you guys hi good to see

@stynkychrist 5 месяцев назад

cool video! I have a question, Im just bought a pair of speaker for my cab,this cab have a very thin gauge cable inside, Im think to raplace for a 16 or 14 gauge cable, and of couse welding the speaker, but what kind o weld you recomende me? 60/40 Or other? Im seein a lead free soldering whit 3% silver. what is better for this? Cheers from Mexico

@purgasound 5 месяцев назад

60/40 rosin core solder is perfect. If it does not have a rosin core then you will need to apply a flux to the surface prior to soldering for a good bond. 16AWG stranded wire is good. 14AWG is too much and will not fit through the solder tabs on the speaker terminals and the jacks. 18AWG is fine too. Marshall uses 18AWG wire in their cabinets.

@stynkychrist 5 месяцев назад

@@purgasound thanks dude 🧙‍♂️

@user-mt9vr6dd9b Год назад

What if you have 2 8ohm, and 2 4ohm speakers & want to wire up this way. What's the end homage on that????

@cheezboi1.041 6 дней назад

I hate to brake it to you but the speakers have to all be the same impedance

@JoelGrindMusic 11 месяцев назад

Nice shirt! From the Shredder in Boise?

@purgasound 11 месяцев назад

That's the one

@andrewdrumstuff 4 месяца назад

so im wiring a 4x8 with a tweeter, the tweeter is 5.6 ohm and theres a crossover, the speakers were originally 32 ohm ( 8ohm cab) and i want it to be 4 ohm, so i got four 4 ohm woofers and i want to wire it like this. Will i be fine to add in the tweeter and itll still be 4 ohm?

@jessicaembers924 3 месяца назад

Yes, if you cut all the frequencies below your tweeter Out of the woofers.

@dracohimself 8 месяцев назад

Nice video, dude. I have a question: So the two speakers connected in series would have an impedance of 32 ohms and since both sides are connected in parallel, the total impedance is 16 ohms? Do I understand this correctly? I'm asking because I have a Peavey 6505 4x12 speaker and in mono (so all four speakers) it has 16 ohms and in stereo (so only 2 speakers) it only has 8 ohms and not 32 and as far as I know it has the same wiring. Or have I not understood something correctly?

@purgasound 8 месяцев назад

You are correct in your first statement. The difference in the Peavey cabinet is that it is wired in PARALLEL/SERIES which, when used in stereo, has a pair of 16 ohm speakers in parallel for an 8 ohm load. When used in MONO the two 8 ohm pairs are connected in series for a 16 ohm total load.

@dracohimself 8 месяцев назад

@@purgasound big thanks for the answer, that makes sense. 👍

@JosePineda-jn8jk 8 месяцев назад

What do you end up with wattage wise?

@purgasound 8 месяцев назад

The handling power of any speaker cabinet will be the number of speakers multiplied by the rating of the lowest wattage speaker.

@grahamhammond Год назад

Is there any particular reason why you don't like using quick connectors?

@purgasound Год назад

On the road the cabs are being shaken up for thousands of miles in the back of a semi-truck, trailer, or van. Those connectors can come loose and I don't trust them. Although I opened one of Sacred Reich's cabs that had been touring since the late 80's and those quick connects were still solid.